South Africa Iron Mineral Wet Magnetic Separate Equipment

Min.Order: 1
Product origin: Ganzhou, Jiangxi, China
Infringement complaint: complaintComplaint
US$ 3800 ~ 62999

Description
 

Product Description

Magnetic Separtor is mainly used to select weak magnetic field and remove the strongly magnetic minerals of fine grains. They are widely used in mineral processing industry, coal washing industry, chemical industry, etc, e.g. recycle heavy formulas such as magnetic heavy media during heavy media separation, concentrate low-concentration slurry in iron ore and gather magnetic steel minerals, treat ore feeding from high-intensity magnetic separators, remove magnetic or weakly magnetic ores and coenobium, as well as prevent blockage of magnetic media.

Our factory supply one roller, two rollers, three rollers, four rollers high intensity and low intensity magnetic separator with wet type and dry type, magnetic field intensity from 800 gauss to 20000 gauss

Wet Magnetic Separator

1.Large Three/Four rollers high intensity wet type magnetic separator (Below Pictures)
Capacity:10-20 tons per hour;
Feeder hopper on the top of the machine available to choose;
Four drums & roller ( Three drums/Two drums available too) ;
First drum size: diameter 500 mm* length 1500 mm, magnetic field intensity:1000 gauss-1500 gauss;
Second drum size:diameter 500 mm* length 1500 mm, magnetic field intensity:8000 gauss;
Third drum size:diameter 500 mm* length 1500 mm, magnetic field intensity:8000 gauss;
Fourth roller size:diameter 500 mm* length 1500 mm, magnetic field intensity:8000 gauss;
Material: steel for the whole machine frame;
Speed adjustable motors;
Electromagnetic speed regulation to adjust the roller speed;


2.Small four rollers high intensity wet type magnetic separator (Below Pictures)
Capacity:1-5 tons per hour;
Feeder hopper on the top of the machine available to choose;
Four drums & roller ( Three drums/Two drums available too) :
First roller :φ160 mm*300 mm,magnetic field intensity:1200 gauss,Stainless steel;
Second roller :φ160 mm*300 mm,magnetic field intensity:8000 gauss,Stainless steel;
Third roller 17:40φ160 mm*300 mm,magnetic field intensity:8000 gauss,Stainless steel;
Fourth roller :φ160mm *300 mm,magnetic field intensity:12000 gauss-14000gauss,rare earth permanent magnet
Electric motor power:2*1.5KW
Material: steel for the whole machine frame;

3.CTS(N.B) series single drum magnetic separator (Below Pictures)
The magnetic field of CTS(N.B) series wet drum permanent magnetic separators divide into rotary and fixed. The fixed one is mainly use in weak magnetic field to separate the fine particle strong magnetic materials, or eliminating the strong magnetic materials in the nonmagnetic ores.
ModelDrum size 
(diameter× length)
mm
Magnetic induction Density mTCapacityPower
Kw
Drum rotation  speed 
r/min
Weight
Kg
Magnetic pole
geometric centre
AverageMax. magnetic strengthT/h3/h
CTS(N.B)-46400×600 1301601~351.145600
CTS(N.B)-66600×600 1451705~10161.140705
CTS(N.B)-69600×900 1451708~15241.140830
CTS(N.B)-612600×1200 14517010~20322.240990
CTS(N.B)-618600×1800 14517015~30482.2401330
CTS(N.B)-712750×120012015518015~30483351500
CTS(N.B)-718750×180012015518020~45723352100
CTS(N.B)-918900×180014816519025~55904282900
CTS(N.B)-924900×240014816519035~701104283500
CTS(N.B)-10181050×180014816519040~751205.5224000
CTS(N.B)-10211050×210016024028045~881405.5224500
CTS(N.B)-10241050×240016024028052~1001605.5225000
CTS(N.B)-10301050×300016024028065~1252007.5226200
CTS(N.B)-12181200×180016024028047~901405.5195800
CTS(N.B)-12241200×240016024030082~1201927.5196200
CTS(N.B)-12301200×300016024028080~1502407.5197200
CTS(N.B)-15301500×300018024030090~17027011148100
CTS(N.B)-15401500×4000180240300115~22035011149300
* CTS is suitable for the roughing and cleaning of particle size in 6-0mm; semi-backflow type
* CTN is suitable for the cleaning and scavenging of fine particle size in 0.6-0mm , and for heavy medium in coal;backflow type
* CTB is suitable for the roughing and cleaning of ores in size of 0.5-0mm, especially suitable for the cleaning of ores in size of 0.15-0 mm; concurrent flow type
Wroking Principle
When the ore pulp entering magnetic field area, the ferromagnetic materials are sucked up on the surface of the drum, weak magnetic substance and nonmagnetic minerals are washed away by water, the absorbed magnetic minerals on the surface of drum are rotated with the drum and taken out of magnetic field area .The rotary one is suitable to dry separate the fine particle strong magnetic ore, because of speedy rotation, the magnetic particle rolling more times than other magnetic separator, which is effectively destroy the reunite of magnetic and arise the high-grade ore, the ore are divide into magnetic and nonmagnetic after separation, and discharge from the own road. 

Dry Magnetic Separator

1.Four drums high tensity dry magnetic separator(below picture)
Capacity:2-5 tons per hour;
Feeder hopper on the top of the machine;
Four drums/rollers:
First drum size: diameter 440mm* length 1100mm, magnetic field intensity:1000 gauss-1500 gauss;
Second drum size:diameter 440mm* length 1100mm, magnetic field intensity:5000gauss-7000 gauss;
Third drum size:diameter 440mm* length 1100mm, magnetic field intensity:8000 gauss-10000 gauss;
Fourth roller size:diameter 220mm* length 1100mm, magnetic field intensity:15000 gauss;
Material: steel for the whole machine frame;
Frequency conversion motors;
AC Inverter Controller to adjust the speed variation of EACH rollers/drums;
Electrc control pannel box to control the machine working;
Usage: it is used for separate Tin ore(cassiterite), Zircon ore, Magnetic iron ore, Ilmenite ore, Monazite ore, Rutile ore, silica sand, ther weak magnetic ore and so on.
This machine is used in P. Kundur. Riau Islands and Mentok, Bangka Islands, Indonesia.
2.Three drums high tensity dry magnetic separator(below picture)
Capacity:1-2 tons per hour;
Feeder hopper on the top of the machine;
Three rollers;
First roller size: diameter 160mm* length 1200mm, magnetic field intensity:1200 gauss;
Second roller/drum size:diameter 390mm* length 1200mm, magnetic field intensity:8000 gauss;
Third roller size:diameter 160mm* length 1200mm, magnetic field intensity:13000 gauss-15000 gauss;
Material: steel for the whole machine frame;
Adjust speed motors;
Electromagnetic speed regulation to adjust the roller speed;
Dimension:1700*1500*2280mm;
Usage: it is used for separate Tin ore(cassiterite), Zircon ore, Magnetic iron ore, Ilmenite ore, Monazite ore, Rutile ore, silica sand, ther weak magnetic ore and so on.
This machine is widely used in Kalimantan Island, Indonesia for zircon sand separation.

3.Two drums high tensity dry magnetic separator(below picture)

Capacity:10tph
Drum size:500*1800*2drums
First drum 1200gauss 
Second drum 8000gauss
Power:6kw
*Material: steel for the whole machine frame;
*Adjust speed motors;
*Electromagnetic speed regulation to adjust the roller speed;

4.Other dry magnetic separators customized as request (below picture)

Application

 

Company Profile

Ganzhou Gelin Mining Machinery Co., Ltd is an over 30 years professional manufacturer and exporter of mining machinery for crushing, screening, grinding, flotation, magnetic/gravity separation etc. in China.the machines are excellent for processing gold,diamond,iron ore, ilmenite, manganese ore etc. Gelin have a complete service system which can provide customer full service in mining field and after sales service.By now, Gelin's equipments and services are exported to over 60 countries,include America, Russia, India, Africa, Brazil, Chile,South Africa,Zambia etc. Sincerely welcome to visit our factory.

Customer Visiting
Our Services


One Stop solution for beneficiation plant service:
1.Engineering consulting available,it makes clients have a comprehensive understanding of beneficiation plant,including mine value,useful elements,mineral processing technology,plant scale,essential equipments,etc.
 
2.Arrange mineral beneficiation experiment after received the material sample and beneficiation test report will be done after test.

3.After reaching agreement with client,we start to engineering design,including planning,investigation,data collection, project evaluation etc. and then comes up with design scheme of beneficiation plant construction and working drawings.
 
4.Manufacturing the necessary equipments and arrange the shipment.
 
5.Complete services for Installation and commissioning and technical training(operating training,common problem solving training).
 
After-sale Service
Regularly visit customers to provide after- sale technical supports and to solve problems of beneficiation plant. For equipments supplied,we could provide one-year warranty and provide spare parts with preferential price in the long term and be responsible for any problems with the them.

FAQ

Q: Are you a trading company or a factory?
A: We are a factory at Shicheng county with 110 workers,6 workshops covered 17,000m2 and office covered 2,500m2. Welcome to visit our factory at anytime.
 
Q: What is your payment terms?
A: By TT(Telegraphic Transfer), 100% or 40% Deposit before production and 60% balance payment paid off before loading from factory.

Q: How long is the guarantee period of your products?
A: The guarantee period is 1-2 years, pls ask staff for more details. And we will supply lifelong technical support service and the spare parts at lowest cost.
 
Q: Is it possible to produce customized products ?
A: Yes, most of our products are produced as required.
 
Q: Is it possible to provide sample for your factory to do ore-dressing experiment?
A: Yes, engineering consulting is available and we'd like to arrange mineral beneficiation experiment after received your sample and provide the test report.

Product Tag:
Related categories:
Scroll to Top