Description
PVA Fibre for ECC
(SAP 206S/ 212S)
DescriptionSAPEN monofilament PVA fiber is made of Polyvinyl alcohol. It's for use in fiber reinforced concrete, stucco and precast. PVA fiber is specifically designed for use in concrete products the surface is specially modified for the purpose of controlling plastic shrinkage, thermal cracking and improving abrasion resistance. When the fiber is used at high doses it can dramatically improve flexural characteristics of concrete products.Application- Replace asbestos use in cement products
- Slabs on ground
- Side-walks, driveways, decks, curbs
- Stucco and precast elements
- Overlays / toppings
- Tunnel shotcrete
- Roads / Pavements
- Bridge Decks
Benefits- Reduces the formation of plastic shrinkage cracking in concrete.
- Improves impact, shatter and abrasion resistance of concrete.
- Enhances durability and toughness of concrete
- Prevent water seepage and prolong the life of the building.
- Cost saving, easier to use,to disperse and safe to handle.
- Can be used in highly corrosive circumstance.
Technical Information| Tensile Strength | >1500 MPa |
| Modulus | >37GPa |
| Elongation | 6.5±1% |
| Fibre dimension | Length: 6mm / 12mm ;
Diameter:20/ 40μm |
| Melt Point | 230ºC |
| Density | 1.3g/cm3 |
| Acid&Alkali Resistance | Excellent |
| Reduction in 90ºC water | ≤1% |
| Appearance | Faint yellow |
| Safety | Non-toxic, non-irritating, neutral |
Guidelines for use1. Generally, keep the original mix ratio and the stressed steel bar, no need to change.2. Dosage: in general, about 0.9-1.9 kg/m3 of each cubic meter concrete.3. Mixing: fibers can be added directly to the mixing system during or after the batching of the ingredients and mixed at high speed for a minimum of five minutes. Additional mixing does not adversely affect the distribution or overall performance of Fibers. The addition of Fibers at the normal or high dosage rate does not require any mix design or application changes. A water reducer or super-plasticizer is recommended in concrete products where improved workability and finishability are desired..4. Forming and curing. No special requirements, just as usual.Packinge.g. 1kg/paper bag, 20kg/woven bag. Package can be customize.
PVA fiber filament and chopped
Packing
Q: Can I have a sample order?
A: Yes,and we can provide 1kg free sample for customer.
Q: How do you ship the samples and how long does it take arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes around one week.
Q: Can I visit your factory?
A: Yes,welcome.
Q: Can you accept mixed batch of different products?
A: Yes, we are support different product mix wholesale, please communicate with us your detail demands.
Q: How long is your lead time?
A: Normally lead time is 5-10 days. It is depend on the quantity and request, please communicate with us your detail demands.
Complaint
