Categories

Polypropylene PP Plastic Raw Materials Granules for Injection Molding Grade
Polypropylene PP Plastic Raw Materials Granules for Injection Molding Grade
Polypropylene PP Plastic Raw Materials Granules for Injection Molding Grade

Polypropylene PP Plastic Raw Materials Granules for Injection Molding Grade

Min.Order: 5
Product origin: Xingtai, Hebei, China
Infringement complaint: complaintComplaint
US$ 1100

Description

Product Description


1.Product Description:

Polypropylene
HS Code:3902100090
Polypropylene is a polymer formed by addition polymerization of propylene. It is a white waxy material with a transparent and light appearance. The chemical formula is (C3H6)n, the density is 0.89~0.91g/cm3, It is flammable, with a melting point of 189ºC, softening at about 155ºC, and the use temperature range is -30~140ºC . It is resistant to corrosion by acids, alkalis, salt solutions and a variety of organic solvents below 80°C, and can be decomposed under high temperature and oxidation.

PP Features

1. The relative density is small, only 0.89-0.91, which is one of the lightest varieties in plastics.
2, good mechanical properties, in addition to impact resistance, other mechanical properties are better than polyethylene, molding processing performance is good.
3. It has high heat resistance and the continuous use temperature can reach 110-120 °C.
4, good chemical properties, almost no water absorption, and does not react with most chemicals.
5, the texture is pure, non-toxic.
6, electrical insulation is good.

2.Specification:
NumberProjectUnitH40STest valueTest Methods
1Melt mass-flow rate(MFR)Nominal valueg/10min3737.3GB/T 3862
Deviation±37
2Isotactic index %>=96.097.51GB/T 2412
3Particle appearanceColor grainPc/kg<=50SH/T 1541-2006
Black grainPc/kg00
Large and small grainsg/kg<=1000.1
Snake skin grains and trailing grainsPc/kgreport25
4Impurities and others Pc/kgnonoSH/T 1541-2006
5Ash %<=0.0300.014GB/T 9345.1
6Tensile propertiesTensile modulus of elasticity(Et) MPa >=12001250GB/T 1040 
Tensile yield stress(σ y) MPa >=30.030.9
Tensile stress atbreak(σ B) MPa >=8.020.7
Nominal tensile strain at break(ε tB) % >=200566
Test conclusionQualified

3.Application:
1.Fiber ( Carpet, Textiles, Upholstery, etc.)
2.Film ( shopping bags, casting film, multilayer film, etc.)
3.Blow Molding ( Medical & Cosmetic container, Lubricant & Paint container, etc)
4.Extrusion Molding ( Sheet, Pipe, Wire & Cable, etc.)
5.Injection Molding ( Automotive, Electronic, Construction, House wares, Furniture,
Toys, etc.)

4.Packaging Details:
25kg/ carton or 25kg/bag, or per your requirement

25kgs net weight in PP woven or PE plastic bag about 20 tons for 20" container

Related products
Polypropylene PP Plastic Raw Materials Granules for Injection Molding Grade
Polypropylene PP Plastic Raw Materials Granules for Injection Molding Grade
US$ 1.8 ~ 1.9
Polypropylene PP Plastic Raw Materials Granules for Injection Molding Grade
Polypropylene PP Plastic Raw Materials Granules for Injection Molding Grade
US$ 1100
Polypropylene PP Plastic Random Copolymer Raw Materials Granules for Injection Molding Grade Copolymer PP Resin
Polypropylene PP Plastic Random Copolymer Raw Materials Granules for Injection Molding Grade Copolymer PP Resin
US$ 800 ~ 1000
PP Plastic Raw Materials Granules for Injection Molding Grade
PP Plastic Raw Materials Granules for Injection Molding Grade
US$ 0.8 ~ 3
Cjs700 PP Injection Molding Grade Virgin Plastic Granules Raw Material Polypropylene
Cjs700 PP Injection Molding Grade Virgin Plastic Granules Raw Material Polypropylene
US$ 1100 ~ 1300
Plastic Materials Virgin Granules Homopolymer PP Polypropylene Blow Molding Grade
Plastic Materials Virgin Granules Homopolymer PP Polypropylene Blow Molding Grade
US$ 780 ~ 1050
Polypropylene Pellet/PP Granules/Plastic Raw Material Injection Grade PP
Polypropylene Pellet/PP Granules/Plastic Raw Material Injection Grade PP
US$ 0.8 ~ 3
PP 500p Injecation Molding Virgin and Recycled Grade Plastic Raw Materials Granules PP Resin Polypropylene for Plastic Hanger Disposable Syringe
PP 500p Injecation Molding Virgin and Recycled Grade Plastic Raw Materials Granules PP Resin Polypropylene for Plastic Hanger Disposable Syringe
US$ 480 ~ 875
Customers Also viewed
PP 500p Injecation Molding Virgin and Recycled Grade Plastic Raw Materials Granules PP Resin Polypropylene for Plastic Hanger Disposable Syringe
PP 500p Injecation Molding Virgin and Recycled Grade Plastic Raw Materials Granules PP Resin Polypropylene for Plastic Hanger Disposable Syringe
US$ 750 ~ 950
Plastic Raw Materia Virgin/Recycled Pellets Homopoly Polypropylene Resin White/Black Granules Modified PP-T30s Injection Grade Blow Molding Grade
Plastic Raw Materia Virgin/Recycled Pellets Homopoly Polypropylene Resin White/Black Granules Modified PP-T30s Injection Grade Blow Molding Grade
US$ 780 ~ 1050
Plastic Raw Materia Virgin/Recycled Pellets Homopoly Polypropylene Resin White/Black Granules Modified PP-T30s Injection Grade Blow Molding Grade
Plastic Raw Materia Virgin/Recycled Pellets Homopoly Polypropylene Resin White/Black Granules Modified PP-T30s Injection Grade Blow Molding Grade
US$ 700 ~ 1500
Marlex Polypropylene Resin Hgx-030 Sp Virgin PP Granule Plastic Raw Material Polypropylene Granules Injection Molding
Marlex Polypropylene Resin Hgx-030 Sp Virgin PP Granule Plastic Raw Material Polypropylene Granules Injection Molding
US$ 800 ~ 1000
PP Plastic Granules Natural Granules Polypropylene PP Raw Materials
PP Plastic Granules Natural Granules Polypropylene PP Raw Materials
US$ 899 ~ 1299
Product Tag:
Related categories:
Scroll to Top