Categories

8 Channels Battery Emulator Simulator Used for Uav Battery Management System Test
8 Channels Battery Emulator Simulator Used for Uav Battery Management System Test
8 Channels Battery Emulator Simulator Used for Uav Battery Management System Test
8 Channels Battery Emulator Simulator Used for Uav Battery Management System Test
8 Channels Battery Emulator Simulator Used for Uav Battery Management System Test
8 Channels Battery Emulator Simulator Used for Uav Battery Management System Test

8 Channels Battery Emulator Simulator Used for Uav Battery Management System Test

Min.Order: 1
Product origin: Changsha, Hunan, China
Infringement complaint: complaintComplaint
US$ 2000 ~ 25000

Description
8 Channels Battery Emulator Simulator Used for UAV Battery Management System Test
N8358 Series High-accuracy Multi-channel Programmable Battery Simulator

A battery simulator can set to any voltage in a short time while a real battery takes hours to reach a desirable voltage, which streamlines bench testing. A simulator can replicate an overcharged battery, which can't be done safely with a real battery.

Product Introduction
N8358 is a programmable battery simulator with low power, high accuracy and multi-channel. By adopting dual-quadrant design, the current can be charged and discharged, which can satisfy the needs of BMS test. N8358 standalone supports up to 8 channels, which can offer four-station test and meet the demands of ATE test in consumer electronics. The voltage & current of each channel can be set on application software. N8358 software is easy to use, which can meet demands of battery simulators in multi-channel, multi-parameter, and complex test environments. N8358 software supports multi-channel batch operation. Data and curve for each channel can be displayed. Meanwhile, data analysis and report function are supported.

Application Fields
1. Consumer Electronics R&D and production, such as mobiles, tablets, earphones, etc.
2. BMS test and CMS test
3. Electric tools manufacturing test
4. Other battery-operated products manufacturing test

Main Features
*Voltage range: 0-6V/0-15V
*Current range: -1~1A/-2~2A/-3~3A/-5~5A
*Remote sense for high output accuracy
*Single device up to 8 channels
*Each channel isolated
*Active/passive balancing test
*Voltage temperature coefficient less than 25ppm/ºC
*Professional application software, supporting data analysis and data report
*Standard 19 inch 2U, available for rack installation
*LAN port and RS232 interface
*Fault simulation: short circuit, open circuit, reverse polarity
*Multi-range current measurement, standby current measurement, internal resistance simulation

Active/passive balancing test
By bidirectional design, current input and output directions of each channel can be respectively controlled. Users can customize the battery charge and discharge model, which fully meets the requirements of BMS active balancing test.

Ultra-high accuracy, supporting static power consumption test
N8358 has high current accuracy, up to 1μA. By supplying power to the DUT, static power consumption of the DUT in standby mode can be intuitively tested. The unqualified products are screened out to ensure the product standby time is within the nominal range after delivery.


Ultra-high integration, built-in fault simulation
N8358 integrates 8 channels in 19-inch 2U size. Each channel has built-in positive & negative polarity short circuit, open circuit, and reverse polarity. Users can control directly on the front panel or on PC. The application of N8358 can eliminate use of external component for battery fault simulation, which can save cost and space for users.


Application-ATE Test
Advantages
N8358 standalone has 8 channels with each channel isolated. Each channel can be used for current input or output. In ATE (Automatic Test Equipment) test system for consumer electronics such as smart phones, Bluetooth headsets, etc., the single production line often uses four stations. During the test, four channels are used as power supply to provide high-accuracy and stable power output. The left four channels are used for battery simulation. Paired channels simulate various operation conditions to check if they can meet the built-in graph requirements. N8358 standalone can be built into a four-station test system, which greatly improves the test efficiency and saves the investment.

Test Items
  1. Charging current test
  2. Static power consumption test
  3. Protection parameter test

Application -BMS Test
Advantages
N8358 standalone can provide 8-channel battery cell simulation, with fast communication response and built-in fault simulation. Bidirectional current flow can be used to test BMS active balancing. The high-accuracy current acquisition enables N8358 to test the static power consumption of the BMS acquisition circuit. All these features make N8358 an ideal selection for BMS test.

Test Items
  1. Battery cell voltage acquisition accuracy test
  2. Battery protection parameter test
  3. Battery balancing test
  4. Static power consumption test of BMS acquisition circuit
  5. Battery fault simulation

Exhibitions

Product Line
 
 
ModelN8358-06-01N8358-06-02N8358-06-03
Current±1A/CH±2A/CH±3A/CH
Voltage6V/CH6V/CH6V/CH
Power6W/CH12W/CH18W/CH
Channels8CH
CV Mode
Range0-6V
Setting Resolution0.1mV
Setting Accuracy (23±5ºC)0.01%+1mV
Readback Resolution0.1mV
Readback Accuracy    (23±5ºC)1mV+2d
Voltage Settling Time≤10ms
Load Regulation0.01%+1mV
Line Regulation0.01%+0.1mV
Temperature Coefficient(0~40ºC)25ppm/ºC
Voltage Ripple          (20Hz-20MHz)2mVrms
Current Measurement
Range 1
Range-1~1A-2~2A-3~3A
Resolution0.1mA
Accuracy (23±5ºC)1mA+2d2mA+2d3mA+2d
Temperature Coefficient (0~40ºC)50ppm/ºC
Range 2   
Range-100mA~100mA-200mA~200mA-300mA~300mA
Resolution0.01mA
Accuracy (23±5ºC)0.1mA+2d0.2mA+2d0.3mA+2d
Temperature Coefficient (0~40ºC)50ppm/ºC
Range 3
Range-1~1mA
Resolution0.1μA
Accuracy (23±5ºC)1μA+2d
Temperature Coefficient(0~40ºC)50ppm/ºC
Current Protection Limit
Range-1A~+1A-2A~+2A-3A~+3A
Current Limit Resolution0.1mA
Current Limit Accuracy (23±5ºC)1mA+2d2mA+2d3mA+2d
Temperature Coefficient(0~40ºC)50ppm/ºC
Dynamic Characteristics
Transient Voltage Drop 1<200mV
Transient Recovery Time 2<100μs
DVM Function
Channels8CHMeasurement Accuracy±0.01%F.S.
Voltage Range-30V~+30VMeasurement Frequency4Hz
Measurement Resolution0.1mVInput Impedance2MΩ
TerminalPluggable terminalTemperature Coefficient(0~40ºC)30ppm/ºC
Others
InterfaceLAN/RS232
AC InputSingle phase, please refer to the voltage mark at the rear panel.
TemperatureOperating temperature: 0ºC~40ºC,  storage temperature: -20ºC~60ºC
Operating EnvironmentAltitude <2000m, relative humidity: 5%~90%RH(non-condensing), atmospheric pressure: 80~110kPa
Net WeightApprox. 9kg
Dimension2U, 88.0(H)*482.0(W)*557.0(D)mm
 
ModelN8358-05-05N8358-15-01N8358-15-05
Current±5A/CH±1A/CH±5A/CH
Voltage5V/CH15V/CH15V/CH
Power25W/CH15W/CH75W/CH
Channels8CH
CV Mode
Range0-5V0-15V0-15V
Setting Resolution0.1mV  
Setting Accuracy (23±5ºC)0.01%+1mV0.01%+3mV
Readback Resolution0.1mV
Readback Accuracy    (23±5ºC)1mV+2d3mV+2d
Voltage Settling Time≤10ms
Load Regulation0.01%+1mV0.01%+2mV
Line Regulation0.01%+0.1mV0.01%+0.2mV
Temperature Coefficient(0~40ºC)25ppm/ºC
Voltage Ripple              (20Hz-20MHz)2mVrms6mVrms
Current Measurement
Range 1
Range-5~5A-1~1A-5~5A
Resolution0.1mA
Accuracy(23±5ºC)5mA+2d1mA+2d5mA+2d
Temperature Coefficient(0~40ºC)50ppm/ºC
Range 2
Range-500mA~500mA-100mA~100mA-500mA~500mA
Resolution0.01mA
Accuracy (23±5ºC)0.5mA+2d0.1mA+2d0.5mA+2d
Temperature Coefficient(0~40ºC)50ppm/ºC
Range 3
Range-1~1mA
Resolution0.1μA
Accuracy (23±5ºC)1μA+2d
Temperature Coefficient(0~40ºC)50ppm/ºC
Current Protection Limit
Range-5A~+5A-1A~+1A-5A~+5A
Current Limit Resolution0.1mA
Current Limit Accuracy (23±5ºC)5mA+2d1mA+2d5mA+2d
Temperature Coefficient(0~40ºC)50ppm/ºC
Dynamic Characteristics
Transient Voltage Drop 1<400mV
Transient Recovery Time 2<200μs
DVM Function   
Channels8CHMeasurement Accuracy±0.01%F.S.
Voltage Range-30V~+30VMeasurement Frequency4Hz
Measurement Resolution0.1mVInput Impedance2MΩ
TerminalPluggable terminalTemperature Coefficient(0~40ºC)30ppm/ºC
Others
InterfaceLAN/RS232
AC InputSingle phase, please refer to the voltage mark at the rear panel.
TemperatureOperating temperature: 0ºC~40ºC,  storage temperature: -20ºC~60ºC
Operating EnvironmentAltitude <2000m, relative humidity: 5%~90%RH(non-condensing), atmospheric pressure: 80~110kPa
Net WeightApprox. 9kg
Dimension2U, 88.0(H)*482.0(W)*557.0(D)mm
Related products
8 Channels Battery Emulator Simulator Used for Uav Battery Management System Test
8 Channels Battery Emulator Simulator Used for Uav Battery Management System Test
US$ 2000 ~ 25000
NGI 24 Channels High Precision Battery Pack Battery Cell Simulator for Battery Management System BMS Test
NGI 24 Channels High Precision Battery Pack Battery Cell Simulator for Battery Management System BMS Test
US$ 2000 ~ 25000
Multicell Li-ion Battery Simulator for Electric Motor Battery Management System Test
Multicell Li-ion Battery Simulator for Electric Motor Battery Management System Test
US$ 2000 ~ 25000
Battery Test System Battery Formation and Grading Machine with 512 Channels Gn-5V5a-512
Battery Test System Battery Formation and Grading Machine with 512 Channels Gn-5V5a-512
US$ 4500 ~ 7500
Lithium Ion Battery Testing System Battery Tester with 8 Channels 5V10mA Tester
Lithium Ion Battery Testing System Battery Tester with 8 Channels 5V10mA Tester
US$ 1100 ~ 1600
18650 21700 26650 32650 Battery Tester Machine 5V6a Charging and Discharging Testing System with 8 Channels
18650 21700 26650 32650 Battery Tester Machine 5V6a Charging and Discharging Testing System with 8 Channels
US$ 700 ~ 3000
Electric Vehicle Battery Thermal Management System for 8-12 Meters Electric Bus
Electric Vehicle Battery Thermal Management System for 8-12 Meters Electric Bus
US$ 1373 ~ 2745
with Bluetooth Monitoring for LiFePO4 Battery Solar Battery Smartec 4s 12V 20A PCM Battery Management System
with Bluetooth Monitoring for LiFePO4 Battery Solar Battery Smartec 4s 12V 20A PCM Battery Management System
US$ 1 ~ 10
Customers Also viewed
EV-Peak U6q 3000W 60A 4 Channels Uav Lipo Battery Charger
EV-Peak U6q 3000W 60A 4 Channels Uav Lipo Battery Charger
US$ 400 ~ 420
24 Channels Battery Tester Battery Measuring Instrument Test Equipment (Model CKT3563A-24H)
24 Channels Battery Tester Battery Measuring Instrument Test Equipment (Model CKT3563A-24H)
US$ 2043 ~ 2150
Hot Sale Wholesale Energy Storage Battery Cooling Management System
Hot Sale Wholesale Energy Storage Battery Cooling Management System
US$ 300 ~ 800
OEM Electrical Vehicle Battery Cooling Thermal Management System
OEM Electrical Vehicle Battery Cooling Thermal Management System
US$ 300 ~ 800
Aobo 2.4kwh Ess Solar Renewable Energy Storage System Lithium LFP Battery with Battery Management System
Aobo 2.4kwh Ess Solar Renewable Energy Storage System Lithium LFP Battery with Battery Management System
US$ 618 ~ 650
Product Tag:
Related categories:
Scroll to Top