Description
pulse jet solenoid valve DMF -T-20 straight-through pulse valveuse
The electromagnetic pulse valve (also known as the diaphragm valve) is the compressed air "switch" of the pulse bag filter cleaning and blowing system. Controlled by the output signal of the pulse injection controller, the filter bags are sprayed to clean the dust one by one row (chamber), so that the resistance of the dust collector is kept within the set range, so as to ensure the processing capacity and dust collection efficiency of the dust collector.
DMF-T electromagnetic pulse valve is a straight-through valve, the angle between the air inlets is 180° (the center line of the inlet and outlet is the same straight line), the inlet is connected with the air storage cylinder, and the outlet is connected with the blowing pipe. The air flow is smooth and can provide the required cleaning air pulse.
working principle
The diaphragm divides the electromagnetic pulse valve into two air chambers, the front and the rear. When the compressed air is connected, the compressed air enters the rear air chamber through the throttle hole. At this time, the pressure of the rear air chamber will make the diaphragm assembly close to the output port of the valve. The solenoid valve is in the "closed" state.
The electric signal of the pulse injection controller makes the armature of the electromagnetic pulse valve move backward, the vent hole of the air chamber behind the valve is opened, the rear air chamber loses pressure rapidly, the diaphragm assembly moves back, the compressed air is sprayed through the valve output port, and the electromagnetic pulse valve is in the "on" state.
When the electrical signal of the pulse injection controller disappears, the armature of the electromagnetic pulse valve is reset, the vent hole of the rear air chamber is closed, and the pressure of the rear air chamber rises to make the diaphragm assembly close to the output port of the valve, and the electromagnetic pulse valve is in the "closed" state again.
Installation instructions:
Clean the piping system and air bag before installing the valve.
The compressed air must be clean and dry.
Technical points:
Stronger blowing effect than 3-inch submerged electromagnetic pulse valve, larger blowing area (more than 70m2 for a single valve), increasing the range of your choice, which is the best choice for your electric bag;
The shape and installation dimensions (for international use) are the same as the 3-inch valve, the minimum installation distance of the valve is 190mm, the only difference is that the injection outlet is larger;
Excellent flow capacity, small pressure loss, and excellent blowing effect (the blowing volume is increased by more than 45% compared with the 3-inch submerged electromagnetic pulse valve);
Good switching performance (with a pulse width of 200ms, the time from opening to peak is 30ms, and the time from peak to closing is 40ms. The total time from opening to closing the valve is 285ms), reducing unnecessary gas consumption and reducing your operating costs;
Imported high-quality finished diaphragm, the promise of 1 million lifespan remains unchanged.
Solenoid valve: 1.High-strength aluminum alloy botton cover 2.One-time machining of valve lever by CN,high precision 3.Valve body was machining by CNC.clean and beautifull 4.spacial rocessing of inner hole,small friction resistance and low starting pressure 5.High-precision pilot accessories .excitation time of only 0.05 seconds 6.imported seals ,the life up to 10 millions of times 7.Aluminum alloy piston is not easy to damage 8.Embedded copper nut not easy to loose 9.with a manual device for installaton and testing 10.Copper coil has avariety ltage availableforsele
Company Profile
Hangyuan Technology is a professional research and development, design,manufacture and sales of precision filtration, precision pressure reducing valve, solenoid control valve, pulse solenoid valve, pneumatic control valve, various electric cylinders and high and low pressure joints, high-quality pipelines and other pneumatic components products manufacturer. And persistently insist on service and quality first, and quick delivery response.
In recent years, we have continuously invested in research and development and quality improvement, and have cooperated with domestic and foreign high-quality material suppliers, seal and grease and other parts suppliers, and surface treatment suppliers to provide diversified and customized products.
We are willing to provide automation The industry will do its best to improve production efficiency and effectively reduce costs, and become a good partner and high-quality supplier for our customers; we look forward to the support and advice of advanced benefits from all industries.
FAQ
Q1:What is your quality assurance?
A:We will inspect one by one before delivery.If the product is damaged in transit or has quality problems, you can choose to refund or resend the product, and the freight will be borne by us.
Q2:What is your terms of payment?
A: TT ,We'll show you the photos of the products and packages before you pay the balance.
B: Paypal payment, Western Union,Bank transfer,Made-in-china Trade Assurance order also available.
Q3: How about the lead time?
A: Normally it will take 3-7 days for our routine products.
Q4:What is your sample policy?
A: Some free samples can be offered if you contact us.
Q5:How about the warranty?
A: All of our products will be guaranteed 1 year warranty.
---- HYTIC . Other Hot products --------
1. EXECUTING COMPONENT
2.CONTROL COMPONENT
3.AIR SOURCE TREATMENT