Complaint
In order to satisfy for customers' high demands of laminating technology, our engineers team devote years to researching and testing, and combined with the characteristic of the best laminating technology in Europe, and finally launch the new automatic laminating machine with advanced technology. The outstanding features are with high speed, high quality, saving electricity and environment-friendly.
○ △ • ▽ ○ △ • ▽ ○ △ • ▽ ○ △ • ▽ Product Introduction ▽ • △ ○ ▽ • △ ○ ▽ • △ ○ ▽ • △ ○
*The machine is suitable for using water-based glue, solvent-based glue, and thermal film.
*Cold-water non-curling system: The paper will be non-curling after separated.
*Low cost: Ceramic anilox roller coating, minimize gluing amount to 5g/sqm.
*The heating energy cycle drying system makes the whole machine power consumption about 30kw/h.
*High efficiency: The machine working speed reaches to 70m/min, 10000sheets/h.
○ △ • ▽ ○ △ • ▽ ○ △ • ▽ ○ △ • ▽ Specification ▽ • △ ○ ▽ • △ ○ ▽ • △ ○ ▽ • △ ○
| MODEL | MTM-108E | MTM-130E | MTM-145E |
| Max. laminating width (mm) | 1,080 | 1,080 | 1,080 |
| Max. sheet W×L (mm) | 1,080x950 | 1,080x1300 | 1,0800x1,450 |
| Min. sheet W×L (mm) | 350x350 | 350x350 | 350x350 |
| Paper thickness (gsm) | 100-500 | 100-500 | 100-500 |
| Film thickness (µm) | 10-25 | 10-25 | 10-25 |
| Laminating speed (m/min) | 10-60 | 10-60 | 10-60 |
| Machine Dimension L×W×H (mm) | 10204×2366×2900 | 10300×2366×2900 | 12994×2366×2900 |
| Machine weight (kgs) | 8,500 | 9,500 | 10,200 |
| Total power (kw) | 63-68 | 63-68 | 63-68 |
○ △ • ▽ ○ △ • ▽ ○ △ • ▽ ○ △ • ▽ Remarks ▽ • △ ○ ▽ • △ ○ ▽ • △ ○ ▽ • △ ○
Laminating speed depend on paper weight, film thickness and gule material quality.
Subject to change without notice.
○ △ • ▽ ○ △ • ▽ ○ △ • ▽ ○ △ • ▽ Configuration ▽ • △ ○ ▽ • △ ○ ▽ • △ ○ ▽ • △ ○
Standard Configuration 1. Automatic Feeder 2. Non-stop Feeding Device 3. Pre-loading Device 4. Laminating Host 5. Automatic Sheeter 6. Automatic Delivery 7. Powder Removing Device | Selectable Configuration 1. Cold Water Non-curling System 2. Hot Knife 3. Anti-static System |
○ △ • ▽ ○ △ • ▽ ○ △ • ▽ ○ △ • ▽ Main Features ▽ • △ ○ ▽ • △ ○ ▽ • △ ○ ▽ • △ ○
○ △ • ▽ ○ △ • ▽ ○ △ • ▽ ○ △ • ▽ Producing And Packaging ▽ • △ ○ ▽ • △ ○ ▽ • △ ○ ▽ • △ ○
From producing to delivery, we make every details very carefully to guarantee the good product quality and service to customers.
Q1: What are your main products ? A: Our main products are the Prepress 4up and 8up Online/Offline Thermal CTP, CTCP, VLF CTP, Flexo CTP, Processor, Offset Plates, Offset Inks, Offset Printing Blankets, Postpress Packing Equipment and so on. You can get the equipment and consumables all in one and no worry about the after-sales service from our company. |
Q2: Where is your factory ? A: Our CTP Processor machine factory is in Shanghai, you are warmly welcome to visit our factory! |
Q3: What is your warranty for the CTPs ? A: Three years' Laser Head and main spare parts for the CTPs, one year for the Processor. If the customer uses EcooGraphix CTP plate with the CTP machine, we will provide the Lifetime Warranty. |
Q4: Can you also supply the Workflow and RIP ? A: Yes, we can provide the Workflow Brainnew and RIP Compose V12. |
A: Our engineer can go to help the installation and provide the necessary training. The buyer should take the round air plane tickets, service charge and the local accommodation cost. Any problems or questions, we will be at your disposal 7x24 hours. Among our large amount of CTP installations worldwide, there are also many end users(printers) who have purchased the CTP products from EcooGraphix China directly and EcooGraphix technical service team support these installations remotely with regular onsite visits. |
