Description
DESCRIPTIONDIESEL PIPELINE WORKSTATIO WD600
WD600 Pipeline Welding Workstation is a fully-enclosed compact unit; it's a diesel power generator and welder combined machine
with dual holder, with multi-functional features. In order to meet the requirements for oil and gas pipe welding, the welding power
source should be functionally capable of welding with low-hydrogen electrode, cellulose down-hill welding, flux-cored
non-gas-shielded welding, and argon arc welding function. The flux-cored non-gas-shielded welding mode can not only use the
SF120 Flux-cored Wire Feeder, it can also conveniently interface with Miller and Lincoln wire feeders (LN-23P or LN-25P, or 12VS).
The auxiliary power supply can output three-phase 50hz 400V 30KW (35Kva) and single-phase 50hz 230V/6.9KW AC.
Technical characteristics of WD600 Pipeline Welding Workstation:
One set of independent power-frequency generator with sufficient auxiliary power output.
AC power output 1~phase 230v *15A+ 230V*15A 6.9kw with two IP66 Australia standard receptacle; AC power output 3-phase
400v 30kw with one IP66 Australia standard industrial receptacle
Weichai 4-cylinder water-cooled 1500rpm industrial diesel engine is used as the source of power; Meanwhile, the diesel engine is
equipped with electronic speed-control system, which is easy to adjust the engine speed and it is very stability with fast response to
the any load.
The engine oil pressure, water temperature, battery voltage charging ,diesel fuel level and other parameters are individually
displayed by using their display gauges or warning lamp indicator, operator is easy to have a clear indication of the monitoring
parameters and state of the engine,IGBT inverter soft switch and negative feedback control technologies are used for ensuring good dynamic performance and welding performance as well as high load duration within full voltage regulating range and full current regulating range. The machine is provided with TIG, low hydrogen, cellulose, self-shielded flux-cored arc welding functions and can be connected to Lincoln, Miller,
and SENCI wire feeders.
It is provided with the function of presetting the current, voltage (optional) with a digital display meter, which can display preset and
actual current and voltage.
It is equipped with dual welder, Single or two people operation can be chosen. When dual operation, two welder can output 2 x 350A
/34V, it can do Φ1.6-8.0 electrode welding simultaneously, when single operation, the welder can output 30-500A.
The welding power source is provided with under voltage protection function. (When the voltage is under 280v AC, the welder can
not work, it will be normal until the voltage return to above 300vac, the normal voltage is 400v AC)SPECIFICATION| Model | WD600 |
| WELDING |
| Dual Welding (A & B) | Handle A | Handle B |
| Welding Processes | Stick | TIG | Stick | TIG | FCAW |
| No-load Voltage (V) | 76 | 76 | 76 | 76 |
| Current Range | (30-350A) *2 | 14-50V |
| Welding Current (A) | 350 | 300 | 350 | 300 | 350 | 300 | 350 | 300 | 350 | 300 |
| Welding Voltage (V) | 34 | 32 | 24 | 22 | 34 | 32 | 24 | 22 | 31.5 | 29 |
| Duty Cycle (%) | 60 | 100 | 60 | 100 | 60 | 100 | 60 | 100 | 60 | 100 |
| External Charact | Drop | Flat |
| Single Welding (A or B) | Handle A | Handle B |
| Welding Processes | Stick | TIG | Stick | TIG | FCAW |
| No-load Voltage | 76 | 76 | 76 | 76 |
| Current Range | 30-350A | 30-500A | 14-50V |
| Welding Current (A) | 300 | 350 | 300 | 350 | 400 | 500 | 400 | 500 | 500 | 600 |
| Welding Voltage (V) | 32 | 34 | 22 | 24 | 36 | 40 | 26 | 30 | 39 | 34 |
| Duty Cycle (%) | 100 | 60 | 100 | 60 | 100 | 60 | 100 | 60 | 100 | 60 |
| External Character | Drop | Flat |
| GENERATOR |
| Rated Power | 30kW (Max.33kW) |
| Excitation Type | AVR Brushless Excitation |
| Frequency | 50Hz |
| Phase | Tri-phase | Single Phase |
| Output | AC400V/30kW | AC230V/6.9kW |
| Model | Yuchai 4D24TG | Kubota V3300-T | Weichai WP2.3D40 |
| Fuel | Diesel | Diesel |
| Rated Power | prime 36kW (standby 39.6kW) | prime 32.1kW (standby 35.3kW) | prime 36kW(standby 40kW) |
| Rated Speed | 1500r/min | 1500r/min | 1500r/min |
| Warning Type | Water Temperature/Oil Pressure/Battery charge |
| Cooling Method | Water-cooled |
| WHOLE SET |
| Fuel Consumption (L/hr) | 7 |
| Fuel Capacity (L) | 85 |
| Protection Class | IP23 |
| Weight (kg) | 800 |
| Dimension(mm) | 1600(L)x820(W)x1050(H) |
FEATURE· Industrial-grade diesel engine-driven multi-function DC power welding generator machine (welding workstation), which can generate electricity and welding, and can output standard three-phase, single-phase 50/60 Hz AC at the same time.· The flux core semi-automatic welding can be realized by matching Miller, Lincoln or Senci wire feeder. The wire feeding speed and welding voltage can be adjusted on WF120 wire feeder. The welding current can be preset and adjusted in MMA mode.· Dual handles can be output independently or in parallel, which can achieve greater current and power output.· Welding current (>15m) is controlled remotely to facilitate the operator to adjust the current and voltage.· Adopting single side integrated maintenance design idea, the maintenance is faster and more convenient.DETAILSQuality Assurance and Service1. Have a complete rigorous management, production and inspection processes to control the quality and avoid detail mistake
2. Design and produce ability
3. Rigorous inspection including incoming inspection, flaw detection etc., and double check is a must.
4. Advanced factory facility ensure
5. Response to any inquiry within 24 HRS with design or efficient solution from our engineer or tech supporter.
6. Provide professional customization service according to client's requirements
7. on time delivery, as we have rigorous production schedule and profession follow-up process
8. Moderate price and professional service
Welcome to your inquiry!
Complaint
