Description
SUPMETER Weigh-in-motion Scales, Wheel Loader Weight Scales Matched to Wheel Loaders/Excavators/Forklift
Wheel Loader Weigher is a dynamic weighing and auto-totalizing equipment installed on wheel loader.
When the lift-arm of wheel loader lifted to a certain height, the position sensor will trigger the weighing process, and the weighing indicator will collect the oil pressure signal from lower and upper oil chambers of arm-lifting oil cylinder. After signal processing and compensating, Single-bucket-loading -weight will be got and totalized to Totalized Loading Weight automatically. The operator can judge if the present Single-bucket-loading-weight is valid according to the alarm messages, and confirm the last bucket's loading weight according to the negative deviation value.
Each set contain:
1pcs Weighing indicator with thermal printer.
1pcs Position sensor.
2pcs Oil pressure sensors.
2pcs Plate type three-way joints.
1pcs Mounting fitting.
Applicable Wheel Loaders
Suitable for the wheel loader series with loading capacity 1~12t.
Specifications of Weighing Indicator
- PRC GB/T 7724-2008 Electronic Weighing Meter National Standard.
- PRC JJG 649-2016 Digital Weighing Indicators National Verification Regulation.
- OMIL R76-1: 2006 Non-automatic Weighing Instruments International Recommendation.
- Accuracy Grade:III
- Number of Verification Scale Interval: n=3000.
- 640×480 TFT color display screen for English character display.
- Weight Display Range of Indicator: -99,999~99,999.
- System Weighing Range: 100~12,000kg.
- Scale Division: Optional 1, 2, 5, 10, 20, 50kg.
- Display Resolution: 1/100,000.
- Scale Unit: Fixed kg.
- Weight Unit: Optional kg, t.
- Ton Decimal Point: Optional 0, 0.0, 0.00, 0.000.
- Display Refreshing Time: Setting Range 0.1~2.0s.
- 20-key English keypad with controllable backlight.
- Menu&Shortcut mode operation with key tone.
- Number and English Alphabet can be inputted.
- Position Sensor Input Interface
- 2 Switch signal Input.
- Output Voltage: DC12V.
- Max. Output Current: 100mA.
- Oil Pressure Sensor Interface
- Excitation Voltage/Max.Current: DC12V/100mA & DC5V/100mA.
- 2 Oil Pressure signal inputs.
- Signal Input Range: Optional 0~20mV, 0~5V[Factory Set Value].
- ∑-△ADC: 24-bit, 1,000,000 internal code used.
- Sampling Frequency: 400Hz.
- Special anti-vibration digital filtering algorithm.
- Zero Drift: ±0.1μV/ºC RTI (Relative to Input).
- Gain Drift: ±5ppm/ºC.
- Non-linearity: 0.005%FS.
Digital Communication Interface
- COM1: RS232.
- Internal COM2: Optional wireless serial communication module.
- Internal COM3: Connected Thermal Serial Printer, Baud Rate 9600bps, No Parity Check Bit.
- 10000 Loading Records can be saved, queried and printed, and each record can contain 50pcs Single-bucket-loading-weight value.
- Operating Voltage: DC24V±20%.
- Max. Power Consumption: 10W.
- Outline Size: 168×213×50mm [W×H×D].
- Operating Temperature: -25ºC to +45ºC.
- Storage Temperature: -30ºC to +60ºC.
- Relative Humidity: Max. 85%RH.
- Protection Level: IP65.
- Weight: Approx. 2.0kg.
Specifications of Position Sensor
- HALL Type Proximity Switches
- Operating Voltage: DC5~24V.
- Detecting Distance: 1~8mm.
- Response Frequency: 5KHz.
- Quiescent Current:Max. 2mA.
- Thread Size: M8×1mm.
- Service Temperature: -25ºC~+70ºC.
- Protection Level: IP67.
- Standard Detecting Target
- Permanent magnet.
- Outline Size: 30×10×5mm [L×W×T].
Specifications of Oil Pressure Sensor
- Operating Voltage: DC5V.
- Capacity: 0~25MPa.
- Accuracy: ±0.1%FS.
- Output Sensitivity: 2mV/V.
- Zero Drift: ±0.015%FS/ºC.
- Safe Overload: 120%FS.
- Thread Size: M10×1mm.
- Service Temperature: -40ºC~+125ºC.
- Protection Level: IP67.
System Accuracy
- Accuracy Grade: III.
- Verification Accuracy of Weighing Indicator: 0.02%.
- Accuracy of Single-Bucket-Weight: 0.5%~1.0%.
- Accuracy of Totalized Loading Weight: 1.0%.
SUPMETER Weigh-in-motion Scales, Wheel Loader Weight Scales Matched to Wheel Loaders/Excavators/Forklift