Class IV 1470nm 980 Nm Diode Laser Liposuction Anti Cellulite Weight Loss Laser Lipolysis Beauty Equipment

Min.Order: 1
Product origin: Beijing, China
Infringement complaint: complaintComplaint
US$ 1999 ~ 2099

Description
 
Product Description
 

Market information: 

The market for body remodelling is expanding thanks to the introduction of new minimally invasive procedures for localized fat removal.

Conventional surgical methods give way to less aggressive techniques, with lower postoperative and more comfortable for patients such

as laser-assisted liposuction, being one of the most popular cosmetic surgeries currently. 

 

Mainly for vascular therapy:.
1 Physical therapy, pain relief
2. Nail Fungus treatment
3 Vascular lesion therapy
Spider Veins/face veins
Remove red blood: all kinds of telangiectasia, cherry haemangioma etc.
3 Plastic surgery: Lipolysis (for choose)
Other therapy:
1 Skin protrusions: warts, mole, flat warts, compound nevus, junctional nevus, fat particles and other skin problems;
2 Pigmented lesions: age spots, sunburn, pigments,
3 EVLT (Endovenous Veins Laser Treatment)
4.Dental

 

Detailed Photos

The 1470 nm/980 nm wavelengths ensure high absorption in water and hemoglobin. The thermal penetration depth is significantly lower than, for example, the thermal penetration depth with Nd: YAG lasers. These effects enable safe and precise laser applications to be performed near sensitive structures while providing thermal protection of the surrounding tissue.

Compared to the CO2 laser, these special wavelengths offer significantly better hemostasis and prevent major bleeding during surgery, even in hemorrhagic structures.


 
980NM&1470NM optical fiber dissolving grease is using the theory of plasma solar-thermal dissolve fat dissolve technology, through to uniform liquefied fat cells, when the body's natural metabolism the liquefied fat out of the body.

980nm laser is the optimum absorption spectrum of porphyrin vascular cells. Vascular cells absorb the high-energy laser of 980nm wavelength, solidification occurs and finally dissipated.

 

 

Using specific wavelength 980nm laser to break the cytoderm of adipocyte, then formed holes in the cytoderm, which makes cytoplasm outflow, body fats turns to be liquid form, by using the patented technical treatment head to discharge the fat cells out of patients body. The wound is only 2mm, which invisible after healing, finally reach the goal of weight loss.

Besides, the lasers stimulate the collagen, which also can reach the goal of skin tightening, wrinkle removal. Laser Lipolys is use specific wavelength laser to break up cell wall of fat cells, formed holes in cell wall make cytoplasm outflow, then use the patented thin needle to draw the cytoplasm out of the body, or out of the body through the lymphatic system. 

Compared traditional liposuction machines with vibration, laser lipolysis is of short time operation, little injury, few bleeding, and patients will not be creative of fear by liposuction. 

The training on how to remove the fat properly with right direction




 
 

Laser liposuction machine with cannulas for fat burning

 Generally, facial laser lipolysis treatment procedure is not complicated, including marks, anesthesia, laser melting, suction and suture bandaging five steps.

1 Mark

 this is the first step in liposuction surgery.

 A purple or red crayon marks the site of fat accumulation, and repeatedly pressed with a finger to determine the thickness of the localized fat. Focus marking the site of thick fat accumulation.

2 Anesthesia

 Anesthetized with local anesthesia, generally 0.1% to 0.5% lidocaine saline solution, dried incision area uniformly injected subcutaneously liposuction, skin swelling until hard feeling.

3 Laser melting

 Select puncture point

 Facial laser lipolysis surgery

 Generally puncture point below the earlobe, mouth red and white lip, chin, etc. median puncture needle point,

 Double chin laser lipolysis surgery

 Needle point at the bottom of the chin, and then the recovery is almost no trace.

 General cut 2mm incision, 2mm needle with a fiber inside through the incision into the subcutaneous fat layer, first pushed to the far end of the needle, reciprocating burning fat with laser energy.

Accumulation of fat burning time more modest extension of the site. Until the fat is completely softened into a liquid.

 The red pilot laser beam shows the burning area.

4 Suction

 connecting electric vacuum equipment, using a dedicated handle, insert the original needle point, to suck the melted fat out.

 But about 5mm thick fat layer of skin should be retained. General cheek sucks out the fat content of 10-30ml, malar about 5-30 ml, lower jaw about 20-35ml.

5 Suture dressing

 Finally facial liposuction surgery, you need to gently squeeze the skin, try to squeeze their internal fluid. A suture needle incision surgery, topical gauze bandaged.


 
 
1
Maximum reliability, minimal side effects
2
Dual wave Laseev Model 980/980+1470 are the most reliable equipment sof the market for laser assisted liposuction. They provide good absorption by adipose tissue and H2O, less swelling and fewer side effects as edema or pain.
3
less bruising will appear as laser coagulates small vessels immediately.
4
Perfect treatment control while seeing the amount of energy in W.
5
Atraumatic and very fine cannulas: incisions are very small.
6
Effective minimally invasive alternative

[Function ]:Physiotherapy
The instrument focuses on the lens to produce acupuncture and moxibustion on the human body. According to medical principles such as anatomy, neurophysiology and traditional Chinese acupuncture, infrared light is applied to the nerve roots, nerve trunks, ganglia, acupoints and local pain points of the human body. To adjust the stability of the human body's environment, so that each system tends to a normal physiological balance, thereby achieving the purpose of treating diseases and preventing diseases.

 
[Function ]:Skin Rejuvenation ,Anti-inflammation
980 nm laser rejuvenation is a non-exfoliating stimulation therapy. It improves the skin quality from the basal layer. It provides non-interventional treatment, and is suitable for different skin states. It penetrates the skin about 5 mm thick through a specific wavelength, and reaches the dermis directly, which acting directly on collagen cells and fibroblasts in the dermis.


[Function ]:Vascular removal
980nm laser is the optimum absorption spectrum of Porphyrin vascular cells. Vascular cells absorb the high-energy laser of 980nm wavelength, solidification occurs, and finally dissipated.To overcome the traditional laser treatment redness large area of burning the skin,professional design hand-piece, enabling the 980nm laser beam is focused onto a 0.2-0.5mm diameter range, in order to enable more focused energy to reach the target tissue, while avoiding burn the surrounding skin tissue.

[Function ]: Nails fungus removal
Onychomycosis refers to fungal infectious diseases that occur on the deck, nail bed or surrounding tissues, mainly caused by dermatophytes, which are characterized by changes in color, shape and texture. Laser nail is a new type of treatment. It uses the principle of laser to irradiate the disease with a laser to kill the fungus without destroying the normal tissue. It is safe, painless and has no side effects. It is suitable for all kinds of applications. The situation of onychomycosis.

Product Parameters

Technical parameters:

Laser type

Diode Laser 980nm/1470nm (Gallium-Aluminum-Arsenide )

Beam

Biquartz optical fiber transmission

Wavelength

978nm/980nm/1470nm/980+1470 Diode Laser

Output power

1-30W/ 60W

Laser type

Pulse,CW, Single

Pulse width

0-1s (stepping 0.05s)

Pulse duration

0-1s (stepping 0.05s)

Frequency

0-30Hz

Fiber

40um/600um/800um, 3meter length/400um is the standard type

Needles

3 Free needles(Diameters from 1.2-5.5 for option, lengths from12cm-35cm for option)

Output timing

300,000 minutes

Indication light

650nm,intensity control

Fiber interface

SMA905 international standard interface,special quartz fiber laser conduction

Packaging & Shipping

Company Profile

 

After Sales Service

7*24 hour service the United states,Europe and Australia have service centers that can provide on-site services or on-site inspectiond.

OEM customized services, including software interface and body screen printing,color,etc.
imported parts
14+ years of production experience
support video to see the factory, keep abreast of production progress.

 

Product Tag:
Related categories:
Scroll to Top