Complaint
EPX-10000 Underground Gold Jewel Treasure Finder Metal Detector
| Depth detection range | 5-50m |
| Detection distance range | 100-1000m |
| Rechargeable battery | continuous work,SD |
| Voltage | 12V DC |
| Temperaure range | 45-85 °C |
| Humidity | 0-95% (no condensation) |
| Other info: | |
| 1.16 bit processor, 40MIPS speed-160MHz 2.32 bit DDS synthesis chip, waveform output 3.Digital frequency synthesis 20PLL, automatic frequency stabilizer,0.1 mhz 4.Color lcd display,480x320 pixels | |
Scanner installation management
Note:In the daily work, the battery should be fully charged.If you don't fully charge it, the EPX10000 can go wrong.If abnormal, this may be the first warning that the battery voltage is too low and should be charged.If the battery is charged all night,but the battery is still no power, you need to replace the battery, or battery charger, or DC current output port without electricity. If the battery is partly charged, the battery may need to be replace the built-in battery.A new fully charged battery can make EPX10000 work for 8 hours.
- Before turning to the scanner,put an EPX10000 transmitter on the ground,the sensor antenna is connected into the crresponding jack for transmitter.While opening the transmitter,never plug or unplug the sensor,if to do so, it may cause damage to the machine.
- Before using EPX10000 scanning,make all necessary connections:
Connect the sensor to the scanner testing (+) and (-) jack, insert the probe sensor to soil.
Install the antenna transmit device to the corresponding interface.
Rotate the "on / off" knob with power key to switch on the power.In the LCD display area,power indicator,horizontal trmming,longitudinal trmming light indicator.
At this point, EPX10000 is scanning any selected elements.Before you start the testing,make it running for 3-5 minutes.
Remember to turn off the EPX10000 power after the operation. To facilitate the use of the device, the battery needs to be charged with a small charger connected to the instrument's power line
- The battery of the instrument needs to be charged with a small charger connected to the instrument's power line.
The degausser is not included in this product.
Note:
1. When detecting, first adjust to the required detection method, and then adjust the frequency to the minimum frequency value reflected by the geographical environment at that time for detection;
2. Because the geological bodies of each environment: such as gold, silver, copper, pyrite, iron ore, lead-zinc, ore, limestone rock bath fracture water, bedrock fracture water and other geological mineralization reactions are different, so When selecting frequencies, start probing from the minimum frequency. If the mineralization interference intensity is large, you can select the average value corresponding to the middle to perform detection, and select the best suitable detection frequency.
Ganzhou Gelin Mining Machinery Co., Ltd is an over 30 years professional manufacturer and exporter of mining machinery for crushing, screening, grinding, flotation, magnetic/gravity separation etc. in China.the machines are excellent for processing gold,diamond,iron ore, ilmenite, manganese ore etc. Gelin have a complete service system which can provide customer full service in mining field and after sales service.By now, Gelin's equipments and services are exported to over 60 countries,include America, Russia, India, Africa, Brazil, Chile,South Africa,Zambia etc. Sincerely welcome to visit our factory.
