ZnAl Wire for Shot Blasting, Zinc-Based Alloy Wire for Shot-Blasting, Anti-Corrosion

Shot blasting is a conventional technology for metal surface treatment. As a kind of shot blasting material, it is used for removing oxidation skin, and burr, eliminating the surface defect, removing stress, etching, unknit, strengthening, and preventing rust before painting of metal die-casting, precision casting, hardware tool, machinery manufacturing, automobile spare parts, apparatus, pump valve industry. 

Shot peening is a method of cold working a part surface under a spray or blast of round shot to increase a part's fatigue life. Fatigue failures usually begin on the surface of a part. Shot peening makes tiny dents or curves on the surface of the metal. This creates a layer of compressive stress, which delays the creation and growth of fatigue cracks. In some instances, peening can increase the fatigue life of a part by 2,000% or more.
 

Chemical composition:

Item	Main elements (%) (min)				Impurities (≤)%(max)
	Zn	Al	Mg	Ni	Fe	Pb	Cd	Cu	TTL
ZA2Mg	REMAINING	1.0-3.0	0.001-0.005	-	0.08	0.01	0.002	0.05	0.1
ZA3Mg	REMAINING	2.0-4.0	0.001-0.005	-
MLZ-1	REMAINING	0.005-0.5	0.005-0.02	-
MLZ-2	REMAINING	-	-	0.001-0.004

Product Features:

Item	Hardness HV0.1
ZA2Mg	≥ 35
ZA3Mg	≥ 42
MLZ-1	≥ 70
MLZ-2	≥ 25

The holding time of the hardness test is 10 seconds, and the test temperature is 20 degrees.

Diameter: 0.3mm≤Ф≤1.60mm

DIAMETER	PERMISSIBLE
(MM)	VARIATION
0.3≤Ф<0.6	+0.00,-0.02
0.5≤Ф≤1.00	+0.00,-0.03
1.00≤Ф≤1.6	+0.00,-0.04
1.60<Ф≤2.00	+0.00,-0.05
2.00<Ф≤2.50	+0.00,-0.06

Product packing:

Hard paper drum	20-400 kg
Plastic spool	10-25 kg
bundle	5-40 kg

Pallet will be used, such as 1100mmX1100mm, 1200mmX800mm, 1000mmX1000mm, 800mmX800mm. 
Our wire is an ideal material to make shot peening materials.
Zinc alloy has a wide range of applications with high-precision surface treatment and is safer and more environmentally friendly in use.
We are looking forward to your cooperation!