Auto Detailing Chemical Dilution Dosing Foam Spray Car Washer

On and off functions are at your fingertips, trigger-controlled on the spray nozzle.

To rinse, the concentrate container is disconnected using an easy-to-operate quick coupler, designed to allow either a full-width spray or powerful jet stream while rinsing.

This range of control helps personnel apply the solution where it's wanted. Handles on larger containers increase the operator's control over the application.

Applications: 
Restaurants
Food preparation areas
Supermarkets
Food processing plants Portable spraying and foaming of concentrates
Animal care/research facilities
Correctional facilities (shower areas)
Health care and educational facilities
Service stations
Paving contractors' facilities (asphalt release agents)

Operation:
1. Unscrew foamer lid assembly from the container.
2. Select a metering tip using the chart below as a guideline and press the tip firmly into the hose barb on the bottom of the lid assembly. Install the suction tube on the hose barb.
3. Fill the container with concentrate. Screw foamer lid assembly securely onto the container. CAUTION: Foamer lid assembly must be securely fastened to the container to prevent accidental spilling of concentrate during the use of foamer.
4. Insert foamer lid assembly into the female quick connect on the spray nozzle.
5. Connect a garden hose with a 3/4" male garden hose thread to the base of the spray nozzle handle. Turn on the water supply to the hose. (Minimum 25 PSI water pressure is required to operate the foamer.)
6. Grasp the spray nozzle handle in one hand and the foamer container in the other. Squeeze the spray nozzle handle to begin foaming. Continuous operation can be achieved by using the handle lock provided on the spray nozzle. Rinse by disconnecting the spray nozzle from the foaming lid assembly. To remove the foamer from the spray nozzle, simply grasp the quick connect on the spray nozzle in one hand and the foamer assembly in the other. Pull in opposite directions. (The outside collar around the quick connect will slide toward the spray nozzle, disengaging the foamer barrel.)