FULLY INTELLIGENT HIGH-VOLTAGE WINDING EQUIPMENT
Using our company's equipment can improve efficiency and reduce costs!
(German technology) New fully automatic high voltage automatic winding equipment
1. Use of the production wireYBX-600 automatic high-voltage winding machine is suitable for all kinds of small and medium distribution transformers, reactor coil and coil winding of similar technology.2. Equipment advantageYBX-600 automatic high-voltage winding machine equipment is a fully automatic high-voltage winding production equipment developed by our company for many years in response to the labor shortage in the transformer industry and the improvement of transformer technology. Faster efficiency and higher precision the entire wire adopts nearly dozens of servo systems for mechanical drive, and ordinary female workers can learn this equipment. With constant tension automatic pay-off function, it can press enameled round wire into enameled flat wire to wind the wire package. The end insulation and interlayer insulation are all automatically wound on the wire package without manual operation. After the tension is Set, the system automatically monitors and compensates. All actions are controlled by the PLC touch screen. The equipment and the automatic pay-off frame are integrated. The total area of the equipment is about 3m*2.5m (including the tension pay-off machine) to reduce sudden short-circuit and no-load. loss, saving material cost. This process has an industry evaluation that the comprehensive cost of a transformer is about 5% less than that of the traditional process! Automatic connection possibleproduction, and cooperate to complete the intelligent upgrade and transformation of the workshop.- Technical specification parameters of YBX-600 automatic new high-voltage winding machine:
| 1. Coil processing range: |
| 1.1. Axial height | ≤600mm; |
| 1.2. Outer diameter of winding coil | ≤500mm; |
| 1.3 Inner diameter of winding coil: | ≤120mm; |
| 1.4. Bearing capacity of spindle: | ≤150KG; |
| 1.5 Coil form: | Round, oblong, oval, rectangle; |
| 2. Coil material: | Enameled wire |
| 2.1 Wire Specifications: | Enameled wire (φ0.3mm ~ φ4mm); |
| 2.2 Working method of tightening: | Enameled wire flattening ≤25% |
| 3. Winding machine (1 Set) |
| 3.1 Winding speed | 0~360r/min |
| 3.2 Working torque: | ≤700N/M |
| 3.3 Winding power: | 7.5KW |
| 3.4 Speed regulation mode: | Stepless frequency conversion servo speed regulation |
| 3.5 Winding method: | Full automatic, semi-automatic |
| 3.6 Tightening mode of spindle: | Pneumatic tension bridle |
| 3.7 Maximum outline size of spindle tension: | 80x118 |
Complaint
