Ty8345 Model 6-8t/H Capacity Pottery &Porcelain Ceramic Mug Cup Bowl Plate Tableware Producing Three Axis Stainless Steel Vacuum Pug Mill

     This machine is mainly used for de-airing and disposing mud for porcelain products.It has three shafts:two mixing mud shafts and one extruding mud shaft.Double mixing shafts cut,mix,stir and pug the mud in the mud tank.It has better effect than the single mixing shaft.It has double stage de-airing structure for de-airing mud in air-extracting base and vacuum chamber,then mud is pushed spirally and pressed,to get more even and compact mud,and to enhance the plasticity of mud.This pug mill is one of necessary machine in porcelain factory.

1. Main component
TY8345 de-airing pug mill(see figure drawing),It is made of motor,reducer,gear case part,upper mixing mud part,air-extracting part,vacuum chamber ,extruding device and chassis.

2. Working Principle of TY8345 de-airing pug mill 
Power is input by belt from motor to reducer,then is transmitted from reducer to gear case.Then through shaft coupling and gear transmission ,the mixing shaft and extruding shaft are driven to rotate.The function achieve.
When mud is input into mud tank through feeding mouth,all the mixing blades and spiral blades on the mixing shaft,constantly break ,mix,knead mud ,and push mud forwardly .Mud is cut into small mud bars by sieve board,and then is pressed into air-extracting base.Fine mud bars are air-extracted firstly in air-extracting base,then is transported into vacuum chamber and extruding device.Then second air-extracting is made in vacuum room.After twice air-extracting ,again the mud is mixed,kneaded,evenly blended and is extruded by extruding device, then is extruded out from forming mould into mud body with high compactness,strong mechanical intensity,fine clean surface without internal stress.
 

Capacity:      6000~8000 KG/h
Diameter of spiral leaf for stirring mud;   240mm
Diameter of spiral leaf for pressing mud:   440 MM
Diameter of mud outlet:    standard 250mm (Max 300mm)
Speed of stirring mud shaft:    20r/min
Speed of pressing mud shaft: 15r/min
Motor power:                 Y225M-4  45KW
Total weight:         4500kg
Overall dimension: 5470×2000×1530 mm (length×width×height)