Electrical Requirements | 220VAC/110VAC.50 or 60Hz,200VA |
Operation Interface | Available in English, French, Spanish, German and Chinese |
Flow Rate | 0.1-10 ml/sec. in increments of 0.1 ml/sec. |
Volume | 0.1 ml to syringe capacity in 0.1 ml increments |
Pressure | Preset limit: 300 psi default, user settable from 50 to 350 psi in 1 psi increments Display: Real-time pressure curve Change threshold: Stop injection if pressure changing suddenly Alarm: Voice alarm and stop injection when over preset limit |
Injection or Scan Delay | 0 to 3599 seconds in 1 sec. increments |
Autofill | Settable flow rate from 3 - 8ml/sec., volume from 10ml to syringe capability |
Injection Capabilities | Programmable up to 8 phases |
Pause Phase | |
Hold Capability | 30 minutes max |
Storage Capabilities | 1000 protocols |
Expel air locked | Unable to inject unless expelling air |
Test injection | Settable flow rate from 0.1 - 5ml/sec., volume from 0.1ml to 10ml |
Heat maintainer | 35~38ºC(optional) |
Hand switch | Hand switch control pause and continue injection (optional) |
Emergency stop function | When the system is injecting, click on any point of the touch screen or any button on the injector arm, the system will stop injection |
Dual Flow | Settable in a ratio of saline and contrast |
KVO | Independent KVO program |
Dimension | Injector Arm and Pedestal:L:22.8*(58.0cm),W: 12.5(20.1 cm),H:50.2"(127.4cm) |
Weight | Injector Arm and Pedestal:19.5Kg Console:4.1Kg |