Conveyor Belt for Cement Plant Fabric Polyester Canvas Air Slide Fabric

Min.Order: 1
Product origin: Taizhou, Zhejiang, China
Infringement complaint: complaintComplaint
US$ 1 ~ 9

Description
Air Slide Woven Fabric, woven filter cloth

Air slide fabrics are used in various industries for pneumatic conveying, discharge, homogenising and fluidising of powdered or granular materials. They are used on pneumatic conveyors, silos of every type, vehicle trucks and ail-wagons and also in ships.

Thickness, 4mm, 6mm, 8mm
Standard length, up to 500 m (1650 ft. )
Applications, industry, agriculture, fluidising and aeration of bulk powders
Material Structure, high tencity polyester yarn, circular woven in plain weave, one side polyurethane-coating, for maximumair permeability on the uncoated side, specially designed for good air transport
Temperature range: -30C ~ 100 C

SpecificationLinear density deviationBreaking tenacity (cN/dtex)Elongation at break 22%Hot air shrinkage (132ºC×15min×0.05g/d)Twist/meter (T/M)
150D-500D/70f±3%>=5.6±3<=4%<>60-200
600D-840D/144f±3%>=6.2±3<=6%<>60-200
1000D-1260D/144f±3%>=6.2±3<=8%<>40-150
1680D-3000D/288f±3%>=6.1±3<=10%<>40-150
4000D-10000D±3%>=6.1±3<=10%<>40-100
<=4%<><=6%<><=8%<><=10%<><=10%<><=4%<><=6%<><=8%<><=10%<><=10%<>

88/5000
It is used in the belt conveyor belt to play the role of carrying and transporting materials of rubber and fiber, metal composite products, or plastic and fabric composite products. Conveyor belt is widely used in cement, coking, metallurgy, chemical industry, iron and steel and other industries where the conveying distance is short and the conveying volume is small

Advantages

  • No moisture absorption
  • No caking
  • Resistant to rotting and decomposition
  • Complete unloading without residues
  • Consistent fluidization over the complete surface
  • Good resistance to abrasion
  • Low wear and therefore longer life
  • Low shrinkage even when used under hot and humid conditions

Working principle

In cement plant:

An Airslide belt is in the middle of a chute. Powder material will come into the chute above Airslide belt. Material will flow to the chute lower side as pneumatic blower down Airslide belt. That's why we say Airslide belt can move powder material because of the wind power. And then, the rest wind will go out from the top of the chute. Through the moving, no parts moved except powder material. So that it can spare more energy and maintain cost, etc.


In fluidization silo:

Our Airslide canvas is installed on the surface of the silo bottom. It is supplied for installation as aeration units on the sloped conical bottoms of bins and silos to aid in the withdrawal of dry relatively free-flowing material.

Each Airslide aeration unit package consists of 200mm open-type. Airslide conveyor units in lengths of 1.5 or 3m depend on the slope length of the conical storage area. Some spoke patterns are normally used with materials which have good fluidization characteristics. Others spoke patterns provide maximum aeration for difficult materials which can be fluidized.
 

In cement vessel's hold:

The sloped bottom of the cargo hold is covered with fluidizing panels. Our airslide fabric is on the surface of fluidizing panels. Rotary piston blowers supply the panels with oil-free compressed air and make the cement flow to the lowest point, where the discharge gate is installed. Powder and particulate material available the Airslide canvas fabric conveyor belt


Application:


In industry

Power Stations: Filtered dust, Flue ash, discharging flue ash, Coal dust

Building and Construction: Cement, furnace dust, gypsum, limestone, finely ground quartz, Calcium hydroxide, lead monoxide, quicklime, acid crystals, Pure clay, phosphates, magnesite concentrate, finely ground fluorid, production of aluminum

Chemical Industry:Thomas meal (Fertilizer), Rubber compounds, sinter dust, catalysts,Sodium sulfate, Soap powder

 

In machinery:

Silos / Tanks : Discharging systems, Warehouse units, Mixing equipment, Homogenizing systems

Chute Bottoms: Conveyor systems, Ventilator systems, Aeration systems

Vehicles : Silo truck discharging cones, Railway wagon discharging cones, Vessel aeration & discharging bottoms, Container aeration & discharging bottoms

Powder Coating Machinery
Bottoms for sinter basin

Yanpai Filtration Technology Co., Ltd., is the leading company specializing in the production of Filter fabric and needle felt in China, our products are mainly used for liquid and solid separation, gas filtration and dust collection.

Yanpai Main Products: Filter cloth (Monofilament Filter Cloth, multifilament Filter Cloth), filter bag, filter press, non-woven spunbonded fabric, Needle Punched Felt( common Polyester and PP Felt, water and oil repellenceFelt, PTFE coat, Nomex, PPS, P84, etc), filter belt, spiral belt, woven air slide, etc

Yanpai Products Materials: Monofilament fiber, multi-filament fiber coming from Polyester (PET), Polypropylene (PP), Polyamide (PA)/ Nylon, Polyvinyl Alcohol (PVA), Fiberglass, Aramid, PTFE, P84, etc

Yanpai Products Application: Municipal and Industrial Waste Treatment, chemical industries, Petrochemicals, Mining, Cement industry, Pharmaceuticals, Food and Beverage Processing, belt press, water purification, brewage, cement industry, etc.

Yanpai now occupies a site area 90, 000 sqm, production facilities some 400 sets, 2 internal laboratories, and around 600 highly trained employees worldwide, in China, USA, Brazil and Germany.

With advanced facilities and technics, Yanpai can produce fabric in particular density and thickness up to your different application at the competitive quality and price.

Yanpai is a competent partner in filtration area. We look forward to cooperate with you.


FAQ:


Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral boxes. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 10 to 30 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.

 

Product Tag:
Related categories:
Scroll to Top