Dual-Band High Gain 23dBm Home Use Basement Cellphone Network Repeater Dcs LTE Signal Booster

Min.Order: 1
Product origin: Shenzhen, Guangdong, China
Infringement complaint: complaintComplaint
US$ 174.5 ~ 191.95

Description



 

Description:
Indoor Dual Band Signal Repeater (Signal Booster) series is an ideal solution for two wireless system in small/medium businesses and home users looking to enhance indoor wireless connectivity. It is connected via coaxial cable to Donor Antenna and Service Antenna, Donor Antenna is placed outside the building where it has easy access to BTS signal, and the Service Antenna is placed in the building where it can extend radio coverage to the blind area. And Automatic Gain Control (AGC) to avoid the Booster from over saturation, therefore maintaining a high voice quality and avoid adding interference to network. With good looking & super compact design also make it attractive. Besides, it is easy installation feature is also for individual customers to install the booster by themselves, and it does not need much professional knowledge and instrument.
The signal booster improves mobile signals with no negative impact on human health.

 
Features:
  1. Cost effective solution for weak signal zones, reduce drop/off calls.
  2. Compact size, low power consumption, easy installation, great cover.
  3. Expansion and extending of the signal of base station.
  4. Optimization of the quality of the signal and source
  5. Cover about 1000~5000m² without block or obstruct.
  6. High linear design, ALC function design, low interference to BTS.
  7. Support any cellular devices (voice & data & video)
  8. Wide band signal booster, or customize selective band booster.
Parameters:

Frequency Range

Uplink

Downlink

DCS1800

1710-1785MHz

1805-1880MHz

LTE2600

2500-2570MHz2620-2690MHz

Gain

70dB±2dB

75dB±2dB

Output Power

20dBm±2dBm

23dBm±2dBm

Band width

Wide Band

Manual Gain Control

31dB / 1dB Step

ALC

>20dB

Ripple in Band

≤ 8dB

Noise Figure

≤ 6dB

VSWR

≤ 2.0

Intermodulation

≤ -40dBc

Spurious Emission

9KHz~1GHz

≤ -36dBm

1~12.75GHz

≤ -30dBm

Time Delay

≤ 1.5 μs

Frequency stability

≤ 0.01ppm

MTBF

> 50000 hours

Impedance

50 ohm

Power Supply

AC 90-264V,DC 9V/5A

Power LED

Power indicator

Alarm LED

Red

Self oscillation or Strong input signal

Green

Normal

Mechanical Specification

RF Connector

N-Female

Switch

Power Switch,Manual Gain Control Switch

Cooling

Heatsink Convection cooling

Humidity

< 90%

Operating Temperature

-10°C ~ +55°C

Environment Conditions

IP40

Installation Type

Wall Installation

Size

268mm*58mm*189mm

Weight

< 4.1Kg

 


Advantages:
Digital Display Panel, Intelligent mode setting
Smart function called which can be activated via the digital display panel.
Users can choose gain and working system by LCE Digital Panel.

Set the technical parameters simple and efficient, this is easier than DIP Switch.


Standard Package: 
1) AC90-264V, DC9V/5A power supply adapter 1PCS 
2) AC power cord (EU/US/UK/SA/China standard, etc) 1PCS 
3) Installation kit 1PCS 
4) User manual 1PCS 


Demonstration of working principle:



Method of Installation:

The booster is fixed onto the wall through expansion bolts.
A.  Drill holes in the selected place and install expansion bolts.
B.  Align the holes with the expansion bolts, place flat washers, spring washers, and nuts in turn, and tighten the nuts to fasten the installing support.
C. Place the booster on and fasten it.
D. Connect cables and power cables to the booster respectively.
E. After installing the booster as described above, power on the booster to check the operation status.


Connection:
A.  BTS Port: donor antenna cable is connected with Outdoor Port;
B.  MS Port: service whip antenna is connected with Indoor Port;
C.  DC IN: connected with Power adaptor.



Application:
To expand signal coverage or fill signal blind area where signal is weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, Shop.etc.




Shenzhen RDSignal Technology Co., Limited
is one of the leading suppliers which specializes in designing and manufacturing RF Jamming Equipment and Wireless Coverage Products.

RF Jamming Equipment include Cell Phone Signal Jammer and RF Communication Jammer(20-6000MHz).

RDSignal Technology Co.,Ltd. is the foremost innovator in the field of RF jamming, offering a comprehensive range of jamming equipment and systems which have a proven record of reliability and performance in all types of applications and environmental conditions.

Such as, Drone jammer, UAV jammer, High power bomb jamming devices, IED jammers, Digital programable jammer, VIP Convoy Bomb Jammers (RCIED Jammers), Mobile Phone Signal Jammers, Prison Jammers, Portable Jammers, Handheld Jammers, to suit all types counter terrorism activities.


RDSignal products have been exported to more than 60 countries and regions around the world. Such as Southeast Asia, Africa, Europe, South America and the Middle East.

Let us hand in hand and create a glorious cause!

Exhibitions

 

FAQ

Q1. Could I get a sample before bulk order?

Yes, we offer the sample for all models but charged.

Q2. What should I do if I don't know about frequency in my country?

Please feel free to contact us with your inquiry, we will find the frequency you need and address your problems.

Q3. Do you accept OEM/ODM order?

Yes, we can customize the brand logo, colors, and frequencies.

Q4.Shipment Date

Sample3-5 business days
<20 pcs="">7-15 days
20-50 pcs15-24 days
>50 pcsNegotiate

<20 pcs="">Q5: Delivery Date of the sample by DHL/FedEx
USA/Canada/Europe/Asia3-5 days
Middle East/Latin American5-7 days
African3-7 days

Q6.Payment Method

T/T, Western Union, Paypal, and Credit Card are available,
but we suggest paying by Alibaba Trade Assurance, the most favor, and security method.
*Other methods please contact us with more details.
 

 

Product Tag:
Related categories:
Scroll to Top