| MODEL | CD6240B |
| CAPACITIES | Max. swing over bed (mm) | 400 |
| Max. swing over cross slide(mm) | 225 |
| Center distance (mm) | 1000, 1500, 2000mm |
| Max swing in gap (mm) | 530 |
| Valid length of gap | 260mm |
| Bed width | 330mm |
| HEADSTOCK | Spindle hole | 65mm |
| Spindle nose | ISO-C6 or ISO-D6 |
| Spindle taper | Metric 70mm |
| Spindle speeds (Number) | 22-1800rpm (15 steps) |
| FEEDS | Metric threads range (Kinds) | 0.5-28mm (66kinds) |
| Inch Threads range (Kinds) | 1-56 /inch(66kinds) |
| Module threads range (Kinds) | 0.5-3.5mm (33kinds) |
| Diametral threads range (Kinds) | 8-56 DP(33kinds) |
| Longitudinal fees range (Kinds) | 0.072-4.038mm/rev(0.0027-0.15 inch/rev) (66kinds) |
| Cross feeds range (Kinds) | 0.036-2.019mm/rev(0.0013-0.075 inch/rev) (66kinds) |
| Rapid traveling speed of carriage | 5m/min (16.4ft/min) |
| Leadscrew size: Diameter/Pitch | 35mm/6mm |
| CARRIAGE | Cross slide travel | 300mm |
| Compound rest travel | 130mm |
| Cross-section size of toolshank | 25*20mm |
| TAILSTOCK | Taper of tailstock sleeve | Morse No.5 |
| Diameter of tailstock sleeve | 65mm |
| Travel of tailstock sleeve | 120mm |
| MOTOR | Main drive motor | 4.0kw or 5.5kw or 7.5kw |
| Coolant pump motor | 0.125kw |
| Rapid traverse motor | 0.12kw |
| Packing Size (L*W*H) (mm) |
| Center Distance 1000mm | 2420*1150*1800 |
| 1500mm | 2920*1150*1800 |
| 2000mm | 3460*1150*1800 |
Complaint
