20Feet CCS Aproved Offshore ISO TANK For Bulk Cement

20Ft Bulk Cement ISO Tank Container




 

Custermizing  Portable iso Tank Container tank container

 T1 ISO tank container for Wine / Juices and Light liquids
T3 ISO tank container for Petrol, Diesel, Jet Fuel, Crude Oil (ATF), Bitumen
T4 ISO tank container for Edible / Non Edible Oils
T11 ISO tank container for Non hazardous chemicals
T14 ISO tank container For Hazardous Chemicals and Acids like HCL / Caustic / sulfuric acid/ Ferric Chloride) with Rubber lining / FRP lining Inner / PE lining
T20 ISO tank container for Bromine
T50 ISO tank container for LPG / Ammonia Gas / Propane
SWAP Tank container for cargo above 28,000 Litres to 35,000 Litres                                                                                   

Tank container main Technical Parameters
	20FT tankcontainer		30FT tank container	40FT tank container
Overall dimension(mm)	6058×2438×2438/2591		9144×2438×2438/2591	12192×2438×2438/2591
Working temperature(ºC)	-12C-50C

40FT 20FT 22.5/29/29.5cbm ISO Shipping Bulk Coal/Cement/Plaster/ZnO/Znic Powder Steel Portable Storage Bulker Cargo Tank Container

20FT 22.5cbm ISO Bulk Coal/Cement Powder Tank Container

20FT 22.5cbm ISO Bulk Coal/Cement Powder Tank Container

 

Dimension of the 20FT   Bulk Cement Powder Tank Container  without Diesel Engine and Air Compressor
Items	Unit	Parameter
External dimension(LxWxH)	mm	20' X 8' X 9' 6"
Internal size of tank	mm	6000 x 2400
Tank volume	m³	20 -- 26
Load capacity	m³	21.5
Design pressure	Mpa	0.2
Test pressure	Mpa	0.3
Design temperature	ºC	0 to +70
Max. gross weight	kg	30480
Tare weight	kg	4,080 (estmated)
Loading weight	kg	26400
Stacking weight.(For 1.8g)	kg	192000
Discharge rating	t/min	cement: 1.0 ~ 1.3
Remnant ratio	kg	cement: about 100kg
Materials
3.1 Main materials usde for the container shall be of the  best quality conforming to the requirements of this specification society.
3.2 Materials of the main parts
Tank ahell Dish ends	Q345B -GB/T 15912008  Yield Point: 35kg/mm2  Tensile Strength: 50kg/mm2
Walk way Internals	Structural steel: SS41 Yield Point: 25kg/mm2 Tensile Strength: 41kg/mm2
Corner posts End rails Tank- to-end linkers End corner supports Tilted panels and ribs	Q345B ISO/R1161  Yield Point: 35kg/mm2 Tensile Strength:50kg/mm2
Corner fitting	Casted Weldable Steel: SCW49  Yield Point: 28kg/mm2  Tebsile Strength: 49kg/mm2
Pipe(Seamless Pipe)	20-GB8163  Yield Point:25kg/mm2 Tensile Strength: 41kg/mm2

Product Description

The functions of this series container tanker/Tank Container:
 This series tank semi trailers are suitable for the transportation of Bulk Cement/Flour/Coal/Plaster/Plastic granule/Lithium Hexafluorophosphate etc. Powder Material.
  The volume varies widely from 22.5 cube meters to 52 cube meters, we can manufacture it according to your needs.

Design proposal for the 20feet ISO tank container:
---Net capacity: not less than 25cubic; Shell of tank container Materials using Wisco Q235 High quality carbon steel 6mm baffle;
---Two feed inlets,bigger manhole covers, 2 NOS. pressure vent valves( breather valve) , at the end of the bottom , DN80 dump valve(discharge valve). Screw of Openings and valves adopt stainless steel screws, single coaming board on the top of tank Molybdenum red reflective tape;
---Framework is made of High quality steel, each one ladder at back and forth. With two acid resistant tube, two 4kg fire extinguishers.

Dimension of the 20FT 26CBM Bulk Cement Powder Tank Container  without Diesel Engine&Air Compressor
Items	Unit	Parameter
External dimension(LxWxH)	mm	20' X 8' X 9' 6"
Internal size of tank	mm	6000 x 2400
Tank volume	m³	26
Load capacity	m³	21.5
Design pressure	Mpa	0.2
Test pressure	Mpa	0.3
Design temperature	ºC	0 to +70
Max. gross weight	kg	30480
Tare weight	kg	4,080 (estmated)
Loading weight	kg	26400
Stacking weight.(For 1.8g)	kg	192000
Discharge rating	t/min	cement: 1.0 ~ 1.3
Remnant ratio	kg	cement: about 100kg
Materials
3.1 Main materials usde for the container shall be of the  best quality conforming to the requirements of this specification society.
3.2 Materials of the main parts
Tank ahell Dish ends	Q345B -GB/T 15912008  Yield Point: 35kg/mm2  Tensile Strength: 50kg/mm2
Walk way Internals	Structural steel: SS41 Yield Point: 25kg/mm2 Tensile Strength: 41kg/mm2
Corner posts End rails Tank- to-end linkers End corner supports Tilted panels and ribs	Q345B ISO/R1161  Yield Point: 35kg/mm2 Tensile Strength:50kg/mm2
Corner fitting	Casted Weldable Steel: SCW49  Yield Point: 28kg/mm2  Tebsile Strength: 49kg/mm2
Pipe(Seamless Pipe)	20-GB8163  Yield Point:25kg/mm2 Tensile Strength: 41kg/mm2

Product Description

The functions of this series container tanker/Tank Container:
******This series tank semi trailers are suitable for the transportation of Bulk Cement/Flour/Coal/Plaster/Plastic granule/Lithium Hexafluorophosphate etc. Powder Material.
*** The volume varies widely from 22.5 cube meters to 52 cube meters, we can manufacture it according to your needs.

Design proposal for the 20feet ISO tank container:
---Net capacity: not less than 25cubic; Shell of tank container Materials using Wisco Q235 High quality carbon steel 6mm baffle;
---Two feed inlets,bigger manhole covers, 2 NOS. pressure vent valves( breather valve) , at the end of the bottom , DN80 dump valve(discharge valve). Screw of Openings and valves adopt stainless steel screws, single coaming board on the top of tank Molybdenum red reflective tape;
---Framework is made of High quality steel, each one ladder at back and forth. With two acid resistant tube, two 4kg fire extinguishers.

 

20feet 29.5 Tanker Container Plaster Powder Tank Container for Sale

 

Dimension of the 20FT 29.5CBM Plaster Powder Tank Container
Description and Specification of Commodity
Loading Capacity	29500L
Overall Size/mm	6058*2438*2591
Tare	4500 KG
Air Source pressure	0.8~1.0Bar
Minimum Loading Weight	27800kgs
Shell Material	Shell Mild Steel Q345B,5.0mm shell,5.0 mm dish ends
Desity of the Plaster Powder	1.0-1.1tons/CBM
Standard fitting
Manhole	520mm diameter 6 point fixing,2pcs.1 pc of 2inches' vent on the top of the tank
Compartment	Single Compartment
Strengthen Ribbers	Both sides and ends.
Tail Structure	Equipped with 6" butterfly valve and quick connector,and also equipped with inlet help-flowing fluidizer;Equipped with air inlet tube and air inlet quick connector;Equipped with pressure gauge and safety valve.
Ladder	Located on the left side of the tail with ladder.
Walkway on the top	400mm walkway,one vertical one,three Horizontal ones;
Remark:	The frame of this Tank container is very strong.

The functions of this series container tanker/Tank Container:
******This series tank semi trailers are suitable for the transportation of Bulk Cement/Flour/Coal/Plaster/Plastic granule/Lithium Hexafluorophosphate etc. Powder Material.
*** The volume varies widely from 22.5 cube meters to 52 cube meters, we can manufacture it according to your needs.

Design proposal for the 20feet ISO tank container:
---Net capacity: not less than 25cubic; Shell of tank container Materials using Wisco Q235 High quality carbon steel 6mm baffle;
---Two feed inlets,bigger manhole covers, 2 NOS. pressure vent valves( breather valve) , at the end of the bottom , DN80 dump valve(discharge valve). Screw of Openings and valves adopt stainless steel screws, single coaming board on the top of tank Molybdenum red reflective tape;
---Framework is made of High quality steel, each one ladder at back and forth. With two acid resistant tube, two 4kg fire extinguishers.

 

ISOTANK List

The Main Technical Parameters of Tanks (ASME Standard)
Item	Loading Medium	Model	Capacity (m3)	Design Pressure (Mpa)	Design Temperature (c)	Tank Material	Nominal Tank Thickness (mm)	Insulation	Tare weight (Kg)	Max. Gross Weight (Kg)	Dimension (LX WX H)(mm)	Loading Method
1	R134a	T50	24	1.38	-40 /+55	SA-612N	11	Sunshade	6400	34000	6058 X 2438 X2591	Down load unload
2	R22		22	2.1	-40/+50		18		8800
3	R143a		22	2.42			20		9500
4	R125		22	2.75			21		9500
5	R32		20	3.44			25		10900
6	AHF	T19	21	1.0	-40/+55	SA516M NGr.485	12	No	6900			Up load unload
7	Trichlorosilan	T14	21	0.5	-40/+50	Q345R (16MnR)	12	No	6780	34000	6058 X 2438 X2591
8	Liquid Chlorine	T50	20	1.7	-40/+50		16		8300
9			21.72	1.62			16		8900
10	Liquid Ammonia	T50	21.6	2.2	-40/+50	06Cr19Ni10	22	Packing Insulation	11970
11	SO2	T20	21	1.03	40 /+60	16MnDR	12	No	6900
12	Cryogenic Liquid	T75	19.8,20	0.75-2.35	-196/+50	Inner Tank: 06Cr19Ni10 Outside Tank:Q345R		Vacuum With Mutli-wrapped	8600/12880			Down load unload
The Main Technical Parameters of Tanks (China Standard)
Item	Loading Medium	Model	Capacity (m3)	Design Pressure (Mpa)	Design Temperature (c)	Tank Material	Nominal Tank Thickness (mm)	Insulation	Tare weight (Kg)	Max. Gross Weight (Kg)	Dimension (LX WX H)(mm)	Loading Method
1	R134a	T50	24	1.38	-40 /55	Q345 (16MnR)	12	Sunshade	6500	34000	6058 X 2438 X2591	Down load unload
2	R22		20	2.1	-40/+50		16		7850
3			24				18		9100
4	R125		22	2.75			22		9900
5	R32		22	3.44			28		12000
6			23.7		-40 /55				12700

 
 

 

Mob :008615271357675