Complaint
Description of Dental Composite Resin Heater:
1.1 Heater designed for heating composite resin material, improve the flow of its adhesive properties; At the same time it can also be used to heat adhesive when used manual equipment.
Heater use the precision circuit control module to heat, control the temperature tolerance within 1 degree,According to your choice of material and it can set any integer temperature within 40-70ºC
1.2 Some materials and recommended temperature
No. | Material | Recommended temperature(ºC) |
1 | Resin(for filling) | 39 |
2 | Resin(for bonding) | 55 |
3 | Branscan | 38 |
4 | Agar film | Melting 99; Insulation 60 |
5 | Sodium hypochlorite | 60 |
2.1 After plug the power supply, the digital tube is always on " -- ºC "
2.2 After plug the power supply, single press " ON/OFF/SET "
Heater goes into the heating state according to the set temperature at previous power-off. It automatically stops heating after reaching preset temperature.
2.3 After plug the power supply, single press " + " or " - " into the setup mode. Press " + " can increase the preset temperature. Press " - " can decrease the preset temperature. After setting, single press " ON/ OFF/ SET " into the heating state. It automatically stops heating after reaching preset temperature.
Notice:
In the setting mode, long press the "+"or "-" to quickly increase or decrease the preset temperature, any integer within the preset temperature 40-70 can be selected.
Technical paremeter:
3.1 Power adapter:
Input:AC100-240V 50/60Hz
Output:DC15V2A
3.2 Heating temperature range:40ºC-70ºC, ±1ºC
Packing List:
1 * AR Heater
1 * Plug
1 * User Manual
