Complaint
| Type | Feed Opening | Max. Feeding Size | Adjusting Range Of | Capacity | Rotation Speed Of |
| Discharge Opening | Eccentric Shaft | ||||
| (mm) | (mm) | (mm) | (t/h) | (r/min) | |
| PE-200*300 | 200*300 | 180 | 15-50 | 2-6 | 260 |
| PE-200*350 | 200*350 | 180 | 18-70 | 3-10 | 260 |
| PE-250*400 | 250*400 | 210 | 20-60 | 5-20 | 300 |
| PE-400*600 | 400*600 | 340 | 40-100 | 16-60 | 275 |
| PE-500*750 | 500*750 | 425 | 50-100 | 40-110 | 275 |
| PE-600*900 | 600*900 | 500 | 75-200 | 60-200 | 250 |
| PE-750*1060 | 750*1060 | 630 | 80-140 | 115-330 | 250 |
| PE-870*1060 | 870*1060 | 660 | 200-260 | 290-336 | 250 |
| PE-900*1060 | 900*1060 | 685 | 230-290 | 160-400 | 250 |
| PE-900*1200 | 900*1200 | 750 | 95-165 | 220-450 | 200 |
| PE-1000*1200 | 1000*1200 | 850 | 195-265 | 315-500 | 200 |
| PE-1200*1500 | 1200*1500 | 1020 | 150-300 | 400-800 | 180 |
| PEX-150*750 | 150*750 | 120 | 18-48 | 8-25 | 320 |
| PEX-250*750 | 250*750 | 210 | 25-60 | 13-35 | 330 |
| PEX-250*1000 | 250*1000 | 210 | 25-60 | 16-52 | 330 |
| PEX-250*1200 | 250*1200 | 210 | 25-60 | 20-61 | 330 |
| PEX-300*1300 | 300*1300 | 250 | 20-90 | 16-105 | 300 |
| Width(mm) | Length(m)/ Power (Kw) | Speed (m/s) | Capacity(t/h) | ||
| 400 | ≤12/2.2 | 12-20/2.2-4 | 20-25/3.5-7.5 | 1.25-2.0 | 30-60 |
| 500 | ≤12/3 | 12-20/3-5.5 | 20-30/5.5-7.5 | 1.25-2.0 | 40-80 |
| 650 | ≤12/4 | 12-20/4-5.5 | 20-30/5.5-11 | 1.25-2.0 | 80-120 |
| 800 | ≤10/4 | 10-15/4-5.5 | 15-30/5.5-15 | 1.25-2.0 | 120-200 |
| 1000 | ≤10/5.5 | 10-20/5.5-11 | 20-40/11-22 | 1.25-2.0 | 200-320 |
| 1200 | ≤10/7.5 | 10-20/7.5-15 | 20-40/15-30 | 1.25-2.0 | 290-400 |
| Model | Motor | Capacity | Input size | Output size | Quantity |
| (kw) | (t/h) | (mm) | (mm) | of hammer | |
| 200*500 | 7.5 | 0.5-2 | <50 | 0.1-3 | 4 |
| 300*500 | 11 | 1-4 | <50 | 0.1-5 | 6 |
| 400*600 | 15 | 2-6 | <50 | 0.1-12 | 8 |
| Model | 6S-7.6 | 6S-4.08 | 6S-1.95 | 6S-0.5 | ||||
| Deck type | Coarse ore deck | Fine sand deck | Slime deck | |||||
| Benefication Area(m2) | 7.6 | 7.6 | 7.6 | 4.08 | 1.95 | 0.5 | ||
| Deck size | Length(mm) | 4450 | 4450 | 4450 | 3000 | 2100 | 1100 | |
| Transmission end width (mm) | 1855 | 1855 | 1855 | 1320 | 1050 | 500 | ||
| Concentrate end width (mm) | 1546 | 1546 | 1546 | 1100 | 850 | 430 | ||
| Maximum feeding size(mm) | 2 | 0.5 | 0.15 | Sand -2 | Sand -2 | Sand -2 | ||
| Slime-0.1 | Slime-0.074 | Slime-0.074 | ||||||
| Feeding amount | 0.8-1.5ton/h | 0.8-1.5ton/h | 0.8-1.5ton/h | 0.4-1.5t/h | 0.3-0.8t/h | 0.05-0.2t/h | ||
| Feeding density(%) | 25-30 | 20-25 | 15-25 | 10-30 | ||||
| Stroke(mm) | 16-22 | 11-16 | 8-16 | 6-30 | 12-28 | 9-17 | ||
| Frequency(F) | 45-220 | 53-250 | 60-280 | 210-320 | 250-450 | 280-460 | ||
| Water added | 1-3t/h | 1-3t/h | 1-3t/h | 0.4-2t/h | 0.2-1t/h | 0.1-0.5t/h | ||
| Transverse slope of deck | 2°30-4°30 | 1°30-3°30 | 1°-2° | 0-10° | 0-8° | 0-10° | ||
| Longitudinal slope of deck | 1.4 | 0.92 | --- | --- | --- | --- | ||
| Cross-section shape of deck | rectangular | saw-tooth | triangle | --- | --- | --- | ||
| Motor power(kw) | 1.1 | 0.55 | ||||||
| Transmission mechanism | Eccentric linkage | |||||||
Our factory not only produce the big equipments for large mining, but also produce small equipments for small scale mining and high school, university laboratory testing!
| 1). Small Mobile Gold Trommel This machine is used for washing and separating diamond mining, alluvial gold mining, placer gold, river sand gold etc. 2). Small Knelson gravity gold centrifugal concentrator: It is used for gold mining concentrating and separation. It is suitable to process alluvial sand gold, placer gold, grinding rock gold, gold tailing etc. Recovery ratio up to 99%. 3). Small Ball Mill: XMQ Series Cone Ball Mill is a lab. Grinding equipment for wet fine grinding of ore (150 × 50 Cone Ball Mill also can be used for dry grinding). It is applied in labs for processing and fine grinding of artificial placer materials and ores in metallurgical, building material, chemical, light, coal, water conservancy, electric power, agricultural and geological industries. 4). Small Flotation Cell: XFD Series Single Flotation Cell is provided for flotation of minor ore samples in labs of geological, metallurgical, chemical and other industries. The product is produced by the only enterprise designated by the former Ministry of Geology and Mineral Mineral Resources, in compliance with the Industrial standards XFD second-generation new product has a variable frequency technology, digital display, adjust the precise, reliable operation and so on. XFD third-generation new product has a variable frequency technology, digital display, adjust the precise, reliable operation characteristics, and the other heat pipes, temperature control device, at any time control, display tank mine fluid temperature, plus automatic adjustment of fill with water, automatic drug delivery devices 5). Small Magnetic Separator: Our factory produce both wet type mangetic separator and dry type magnetic separator. Magnetic Separation Machines for metal mineral processing laboratory, mining engineering experiment, the middle experimental plant, which uses fine-grained wet method magnetic ore separator, only a small amount of sample can be tested technical indicators of mineral iron content. Separator small size, easy to operate. The device is not suitable for beneficiation test with a corrosive liquid. This product is the only designated former Ministry of Geology and Mineral production, the implementation of industry standards. 6). Small High Tension Electrostatic Separator: It is an dry separating equipment in the high voltage electric field. High voltage electricity separator is an dry separating equipment in the high voltage electric field, which eliminate the mineral according to the differences of materials electricity nature. The selection of the Non-ferrous metal and black metal, such as iron ore, zircon, primary limonite, beach placer, manganese ore, titanium, tantalum, niobium, tin, monazite, and primary retiles. The separation of impurity mineral which associated with feldspar and quartz. |
Our company & Customers Visiting
Ganzhou Gelin Mining Machinery Co., Ltd is an expert manufacturer of mining machines in China. Our company is located in Guzhang Industrial Zone, Shicheng county, Jiangxi province, covering an area of over 30000 square meters, having more than 30 sets of heavy processing equipment and with an annual outpurt of more than 2000 sets of mining machinery.
1.Based on clients' request and budget, GELIN experts will strictly make efficient, reliable solutions accordingly;
2.Mine sample testing is available, we welcome the customer send the sample to you for testing by courier, or, the customer take the sample to our factory for testing;
3. Design and provide the complete processing flowchart;
4. Design & manufacturer products according to clients' demands.
--- AFTER-SALE SERVICE ---
1.Pre-check and test the products before delivery;
2.Deliver the whole plant design for our clients which including infrastructure, electrical system and pipeline system design;
3.Trace the status of the shipping until the products received;
4.Prepare required documents to let clients pass custom clearance;
5.Dispatch experts to carry out below service on site:
1) Installation & debug of the machinery
2) Train the first-line operators & technical personnel
3) Carry out any other service clients may need
6. Provide technical exchanging & spare parts for life-long term
--- ONE STOP SOLUTION ---
1.Starting by running the mineral beneficiation experiment. To provide our clients with the best solution accordingly;
2.Besides supply the flowchart design & equipment, we also provide the infrastructure design; Electrical & pipeline system design, etc. To help our clients complete the design of the whole plant;
3.After the installation, debugging of the equipment, the official production will also be guiding by our experienced engineers on site, to guarantee the output minerals perfectly meet your demands.
FAQ
A:1). What type is the mining? Is it rock stone? or it is sand?
2). If rock stone,What is the general particle size(mm) of the raw ore?
3). What is the handling capacity(tons per hour) you plan to work with?
4).What is the elements of the raw ore? How much percent % of each minerals?
A: Yes, we can run the ore-dressing experiments for our customers. After the test, we will based on the results to give you the reasonable flowchart, suitable solution and equipments selection. etc.
A: The warranty period of Gelin equipments is one year. And of course we will supply the spare parts for you for life-long time at lowest cost.
A: Yes, we can help you combine a complete mineral processing line. and give you related professional advices as long as you need.
There is a rich experience engineer team of us. we had already build many mining projects in China & Overseas. You can believe our quality and service.
Welcome to visit our factory in your free time!
