2.
Baffle1) Pneumatic side flap device (operating side), the flapping frequency can be set on the screen
2)The rear paper -holding frame and the front/left/right side baffles is adopted with electrical adjustment.3.Combination and separated1)Machine separated and combined is adopted electric control device with automatic alarm bell.2)The whole machine is fixed on the track by the main lock cylinder of the feeding part 4.Feeding roller1)The cardboard feeding rubber rolls are made of solid steel covered by wear-resistant rubber.2)Paper feeding roller adopts embossing roller, hard chromium plating, wear resistance, smoothly5.Zero device1)With zero and phase memory function, to ensure that the correct position, reduce cardboard waste 6.Remove dust deice1)The feeding unit with a dust brush and suction.It can remove the dust on the surface effectively to ensure the clarity of the printing, reduce paper wasteprinting unit 1.Printing roller1)The phase adjustment of the printing roller adopts the planetary gear structure, PC control, digital display, the printing cylinder can be adjusted 360 degrees.With positive and negative accuracy adjustment.Run and stop is very stably.Easy to change the printing plate.2)The printing roller is grinding and chrome hardening treatment with the latitude and longitude lines center line, easy to hang printing plate.3)balance correction, stably, and no effect in high speed running4)With hanging printing plate system,easy to change it.5) With the zero function,easy to change the order,with foot pedal to changing the printing plate.with accuracy adjustment.
6)Printing roller left and right electric adjustment range: 15mm;3.ink supply system1)one-way pneumatic diaphragm pump automatic circulation of ink, anilox roller and printing plate inking system is electric adjustment.2)Using filter get rid of the impurity to protect the printing quality3)The inking bucket is made of stainless steel 4)Ink bucket for special nanotechnology, non stick ink, easy to clean4.Phase adjustment structure1)Adopts high precision planetary gear mechanism.2)Printing phase is adjusted by PLC, touch screen and electric control 360 degrees adjustment3)With brake motor with phase adjustment, phase adjustment wheel make accurate positioning 5.Phase fixing system1)Clutch or phase adjustment, the original gear meshing points unchanged Slotting unit
1.Operation control1)Tough PLC checking adjustment with touch screen control.Automatic positioning2)Except to using PLC and rotary encoder to adjust the cutting size and the height of the carton. But also can using electrical button to adjust them.3)Equipped with emergency stop device to ensure safety2.Slotting phase adjustment1)With high precision frequency conversion speed adjustment of 360 degrees .Positive and negative adjustment.2)Phase zero device, to ensure the consistency of the slot position3.Creasing wheel1)The creasing wheel and the shaft 2)The creasing wheels surface wear high quality resin,which can avoid the damage of cardboard.3)The lower shaft of the slotting cutter are all provided eccentric sleeve structure to make it compact and accurate 4.,Cutting holder1)The thickness of slotting knife is 7mm. Imported high-quality alloy steel heat treatment of crescent serrated blade with high hardness, good toughness, strong wear resistance 2) The slotting shaft is hard chromium plating on the surface
3)
The cutting holder, creasing wheel, position axial automatic adjustment 4)
With slotting phase detection device, can record the position of the slotted shaft at any time, in theory, to ensure to return back the right position according to different size order5)Slotting distance, height of carton, using PLC and rotary encoder control, automatic adjustment 6)
There are pre-creaser before slotting.5Can produce large double stitching carton, heaven and earth cover carton Middle knife moving structure Die cutting unit
1.Operation control
1) Using digital display.It is automatically detect through PLC and rotary encoder,
2)Emergency stop device is installed to ensure safety. 2.Phase adjustment
1)The anvil cushion adjusted up and down by electric form, the anvil cushion can automatically move axially, continuous, about travel each 20mm. It can make the rubber sleeve wear uniform, prolong the service life. 2)Die cutter is adjusted by electric around 360 degree.and the die cutter shaft can be adjusted +-8mm 3.Die Cutting Creasing Shaft
1)It is made of seamless steel and surface is plated with hard chromed ; The diameter is φ360mm it carried out dynamic balance calibration.
2)The surface is covered with polyurethane rubber mounting using buckle type structure, convenient replacement.
3)Die cutting roller adopts independent servo motor drive for speed compensation, ordinary carton compensation range is +- 3mm;
4)Roller adopts mechanical differential structure to make it about automatic traverse, lateral displacement of positive and negative 40mm, can make the rubber sleeve wear uniform, prolong the service life
5)The clearance of the die cutter rubber roller is electrical adjustment, digital display, adjusting range is 0-12mm;
6)Die cutting phase adjusting and it will automatic return back the location, the cutting wheel will automatically rise. So as to avoid damaging to the rubber pad;
4.phase adjustment
1)Die cutting phase adopts planetary gear structure, which can be used for precise 360 degree phase adjustment
2)The phase is adjusted by electric, digital display, with memory function. After the adjustment, it can revert to the original die cutter position
3)Left and right movement i manual adjustment, left and right moving positive and negative 8mm
4)The phase fixing adopts an electromagnetic brake mechanism, when the machine platform separates or adjusts the phase, the brake mechanism limits the rotation of the machine and keeps the die cutter position fixed
Complaint
