Product profile: This series of pumps are horizontal single suction multistage segmented centrifugal pumpsusing state-recommended hydro-module. The pump is efficient, reliable,and durable with low noise performance,easy maintenance and wide scope of usages.We specialize in manufacturing D,DF,DY and MD series of single-suction multistage .Our pumps are widely applicable. Our pump is applicable to deliver those fluid without solid particles or any other suspended stuff, water for instance. While oily and corrosive or solid-contained fluid can be pumped by means of material modification,sealing methods, and cooling system adding. The max.inlet pressure shall be 0.6MPa.
Scope of application Horizontal multi-stage centrifugal pumps according to their scope of use can be divided into the following types:
D type: Used for transmission of water free of solid particles and temperature below 80 ºC,or similar physical and chemical liquid.Suitable for mining,mill and city water supply and drainage. Cast iron material wet parts;1045,080M46 ASTM steel for shaft.
DF type: Used for transmission of corrosive liquid with temperature below 80 ºC and non-solid particles. Material sealing methods, structure of the pump and motor model can be determined by medium,gravity,density,working temperature and the suction pressure.
DY type: Used for transmission of non-solid oily liquid and petroleum product with temperature below 80 ºC and viscosity less than 120 cSt.
MD type: Used for transmission of neutral liquid from mining well or other similar liquid. The density and size of particles of the sewage shall be less than 1.5% and 0.5mm respectively. The temperature below 80 ºC.
Scope of behavior :
D , DF , DY and MD pumps have the same performance parameters
The inlet and outlet diameter of the pump ranges 40~300mm
Flow Q=3.75~850m3/h
Lift H=19~816m
Motor power N=5.5~1600kw
Model's meaning Such as D (DF, DY, MD)600- 60x6 D -----horizontal multi-stage fresh water/ multistage centrifugal pump
DF ----mine corrosion resistant horizontal multi stage centrifugal pump
DY --horizontal multi-stage centrifugal oil pump
MD --mine wearing resistant horizontal multi stage centrifugal pump
600 -design point flow is 600m3/h
60 ---design point single-stage lift: 60m
6 -----pump stages: 6
About us:
Application scenario---the pump house:
Scope of application:
Package shipment:
Note: The material is determined according to the temperature and corrosive of the transmission medium.
If there are special circumstances beyond the performance parameter table, the consultation on pump selection can be provided.
Our company can select materials according to the specific requirements of users, or produce according to the materials required by users.
Complaint
