138kv High Voltage Cable Accessory Insulating Cable Joint

Min.Order: 3

Product origin: Wuxi, Jiangsu, China

Infringement complaint:

Complaint

US$ 2000

Description

Introduction on Cable Accessories for 48/66~290/500kV
48/66kV~290/500kV high voltage cable accessories can be classified as porcelain bushing outdoor termination, composite bushing outdoor termination, full-prefabricated soft dry type outdoor termination, GIS termination, full-prefabricated silicone rubber straight through /insulating joint, assembled joint applied to any cross section, single-phase type and three-phase type for fully dry insulating branch joint, grounding box, and grounding protection box, interconnected box and sheath protector, etc.

4E-YJZWC Porcelain Bushing Outdoor Termination
The company produces two main of porcelain bushing outdoor termination, 4E-YJZWC3 and 4E-YJZWC4, which are widely used for outdoor high-voltage overhead lines and cable connections with anti-pollution grade of grade III, and grade IV. They are composed of connecting bar, stress cone, porcelain bushing, and tail tube. We use imported liquid silicone rubber injection molding to make stress cone, which has long-term stability of lasting hold power and electric field uniformity ability. Porcelain bushing is using high strength inorganic electric porcelain with stable performance. Porcelain bushing is applying skirt structure, and the overall is conical with good performance of pollution flashover resistance, weather resistance, anti-leakage marks, anti-erosion and water repellent ability. The porcelain is filled with insulating oil with excellent electrical insulation properties, and the mutual dissolution or penetration is as low as 1/1000 between silicon stress cone to ensure the long-term safe operation of the product. Our product is using multiple sealing structure which can effectively prevent the leakage of water immersion and insulating oil. All of the seals are using imported NBR or silicon rubber material. All of the fastener raw-material are stainless steel with good waterproof seal performance.
Porcelain bushing has a long run safe operation history more than one hundred years in the power industry, which is the best example of a mature use.

Outlet clamp 2. Grading shield 3. Core insulation

4. Polyisobutylene 5. Porcelain bushing 6. Stress cone 7. Fixed plate 8. Support insulator 9. Tail pipe 10. Cable

Size mm	48/66kV	64/110kV	80/138kV	127/220kV
H	1270	1500	1750	2500
A	1510	1935	2085	3100
B	1925	2155	2400	3600
C	450	450	450	650
D	200	200	200	300
E	Φ22	Φ22	Φ22	Φ32
Creepage distance	≥2248	≥3906	≥4495	≥7812

Main structure features:
Reasonable structure: high strength inorganic electric porcelain with stable performance. Porcelain bushing is using skirt structure, the overall is conical with good anti-pollution flashover resistance, weather resistance, anti-leakage marks, anti-erosion and water repellent ability. Multiple sealing structure is perfect and effective.

1-500kV Cable Accessories Electrical Performance Parameter
1~500kV cable accessories common parameters and factory test specification
Voltage levels provided by our company include 1kV, 10kV, 35kV, 48/66kV, 56/78kV, 64/110kV, 76/132kV, 127/220kV, and 290/500kV in accordance with IEC60502, IEC60840, IEC62067, IEC60859, IEC62271-209, GB/T11017, GB/Z18890, GB/T22078, GB/T12706, GB311, GB772, BS EN 50181, IEEE386, DL508, DL509, JB/T8144 standards, and pass through rigorous factory test, type test, and pre-identification test (220kV and above).
Test name and code

Test classifications and code:

No.	Test Name	Code
1	Routine test	R
2	Sampling test	S
3	Type test	T
4	Pre-identification test	P
5	Additional test	A

Routine test for each of the stress cone, GIS epoxy bushing, and straight through joint prefabricate main body of 66kV and above cable accessories:

Item	66kV	110kV	220kV
Partial discharge	72kV, partial discharge not more than previously carried out items	96kV, partial discharge not more than previously carried out items	190kV, partial discharge not more than previously carried out items
Power frequency withstand voltage	120kV/30min (joint main body 60min, no flashover no breakdown)	160kV/30min (joint main body 60min, no flashover no breakdown)	318kV/30min (joint main body 60min, no flashover no breakdown)
Seal test	0.25±0.01MPa/1h for sealing fittings, porcelain bushing, composite bushing, no leakage
Seal test	0.6~0.7MPa/1h for epoxy bushing, no leakage
Appearance test	No damage, no cracking and other defects that affect the quality and appearance