Complaint
| Model | RN190-160C | RN220-200C | RN250-250C | RN250-315C | RN300-400C | |
| Molds Distance | Ton | 190 | 220 | 250 | 250 | 300 |
| Press Power | times/min | 160 | 200 | 250 | 315 | 400 |
| Press Speed | pcs | 55 | 50 | 40 | 40 | 35 |
| Capacity when double press | mm | ≤43 | ≤40 | ≤30 | ≤30 | ≤25 |
| Can produce the hex nut | mm | ≤50across flats of nuts(single press≤55) | ≤60across flats of nuts(single press≤65) | ≤65across flats of nuts(single press≤80) | ≤70across flats of nuts(single press≤90) | ≤75across flats of nuts(single press≤100) |
| Package Size L*W*H | mm | 1600X1400X110 | 1900X1450X1100 | 190X1550X1100 | 1900X1550X1100 | 2000X1700X1100 |
| Weight | kg | 1600 | 1800 | 2500 | 2800 | 3500 |
If you need to produce bigger size parts, please contact with us.
Production Line Location
Production Line Introduction
1. The raw material is bar steel, and the automatic bar steel cutting machine is used to cut the material. The cut material is flat at both ends. The head and end materials of the bar are automatically separated and enter the waste area. The good materials is conveyed into the storage bin of the fully automatic feeding machine.
2. The automatic feeding machine will push the material into the hearth furnace position of the induction heating machine
according to the set frequency, and automatically push it out after heating, without the need for human supervision.
3. The heating equipment adopts induction heating, and the material is pushed into the heating furnace by the automatic feeder, and the frequency is automatically heated according to the heating progress.
4. The heated workblank is also slid into the guide tube of the hot forging CNC synchronous manipulator from the intermediate frequency protection control exit through the slide, and the manipulator clamps the workblank into the mold and heat-acid-formed.
5. Install the control buttons of the shearing machine, intermediate frequency and automatic feeding machine near the operator. One nut hot forging production line only needs one person to operate (one person can take care of the feeder and the CNC).
Case
Nut Making Machine Factory Introduction
Our Services
