Complaint
| Tests | Value | Unit |
| Melt Flow Rate (MFR) | 15 | g/10min |
| Density | 0.922 | g/cm3 |
| Tensile Yield Strength | 7 | Mpa |
| Elongation at Break | 75 | % |
| Wien Softening Point | 85 | °C |
| Packing | In 25 kg PP woven bags,20MT/20'FCL | |
| Tests | Value | Unit |
| Melt Flow Rate (MFR) | 2 | g/10min |
| Density | 0.9225 | g/cm3 |
| Tensile Strength | 9 | Mpa |
| Elongation at Break | 500 | % |
| Fish eye max(0.3-2mm) | 30 | n/1200cm2 |
| Stripes | 20 | cm/20m3 |
| Packing | In 25 kg PP woven bags,20MT/20'FCL | |
polyethylene Low density polyethylene is used for injection molding products, food packaging materials, medical appliances, pharmaceuticals, blow molding hollow molding products, fibers, etc. Polyethylene can be processed into film, wire and cable sheath, pipe, all kinds of hollowproducts, injection products, fiber, etc. Widely used in agriculture, packaging, electronic and electrical, machinery, automobile, daily necessities and other aspects
25kg/ carton or 25kg/bag, or per your requirement
https://hbsyplastic.en.made-in-china.com/product-list-1.html
1.We are able to provide customized service based on your requirements.
