Complaint
Step 1. Insert band through buckle, teeth toward the user, ears up. For better result, continue band around object once again through buckle. Bend end of band under buckle.
Step 2. Push axle handle so the band can be placed in slots of tool. Push nose of tool against the buckle.
Step 3. Place finger on buckle bridge and apply tension by turning handle.
Step 4. When desired tension is reached, over buckle. This movement increase tension of band and, to avoid breakage, handle must be reversed slightly as tool is swing over.
Step 5. Pull cutter handle to cut band.
Step 6. Remove tool, while holding band down with thumb.
Step 7. Hammer ears down to seal the band.
| Description | a).Buckle can be easily formed to suit any diameter. b).Uses include insulation fixing,Cable bunding sign erection. c).Excellent corrosion resistance. d).Available in grade 304 and 201 stainless amongst others. e).Available in sizes:6.35mm,10mm,13mm,16mm,19mm |
| Ear-lokt Buckles | Stainless Steel ear-lokt buckles qre designed to accommodate both single and double wrap clamps,the unique teeth and ears provide for maximum clamping strengths.. |
| Packing&shiping | Standard export seaworthy packing with waterproof paper,metal belt pack sheet,then put them in wooden pallet,then put in aontainer or customized. |
| Part Number | Width inches(mm) | Thickness | pcs/bag |
| JBK14 | 1/4(8) | 0.5 | 100 |
| JBK38 | 3/8(10) | 1 | 100 |
| JBK12 | 1/2(12.7) | 1.2 | 100 |
| JBK58 | 5/8(16) | 1.5 | 100 |
| JBK34 | 3/4(19) | 1.5 | 100 |
