Complaint
Measure Medium | Dry gas (low corrosion) |
Measuring Range | 0~1KPa~600KPa |
Power Supply | 12VDC~36VDC(Standard24VDC) |
Output Signal | 4~20mA;1~5V;0~10mA;0~20mA;0~5V; |
Medium Temperature | -40ºC~85ºC |
Compensation Temperature | 0~50ºC |
Ambient Temperature | -20ºC~85ºC |
Pressure Type | Differential Pressure |
Accuracy | 0.2%FS;0.5%FS |
Temperature Effect on Zero | ±0.03%FS/ºC |
Sensitivity Temperature Drift | ±0.03%FS/ºC |
Overload Pressure | 300%FS |
Response Time | ≤10ms |
Waterproof | IP65 |
Material | Aluminium Alloy |
Process Connection | M20X1.5 Male/1/8''NPT Male Customized |
Explosion-proof Grade | Exia II CT5(safe explosion proof type) |
Debugging Method
Open the HSM connector and screw down the stainless steel tube, you can see the Zero and Span resistor, connect power supply and ammeter (over 0.2 level), then you can adjust it, the steps as following:
1. When the transmitter is not pressurized, adjust the Zero resistor to make it output current 40mA.
2. The transmitter is pressurized to full range,adjust the Span resistor to make it output current 20mA.
3. Repeat the above steps 2 or 3 times until the signal is normal. After adjustment, tighten the protective cover.
