Black Silicone Rubber Ring Waterproof Seal Small Rubber Oil Seal

Min.Order: 1,500

Product origin: Ningbo, Zhejiang, China

Infringement complaint:

Complaint

US$ 0.1 ~ 0.5

Description

The oil seal structure of small household appliances consists of three parts: oil seal body, reinforcing frame and self tightening coil spring. According to different parts, the sealing body is divided into bottom, waist, edge and sealing lip. Generally, the inner diameter of the skeleton oil seal in free state is smaller than the shaft diameter, that is to say, it has a certain "interference". Therefore, when the oil is sealed on the oil seal seat and shaft, the pressure of the oil seal blade and the shrinkage force of the self tightening coil spring will produce a certain radial tightening force on the shaft. After a period of operation, the pressure will rapidly reduce or even disappear, so, the spring can compensate the self tightening force of the oil seal at any time.

Material	PTFE
Temperature(ºC)	-30~+220°C
Pressure	2 MPA
Medium	Mineral oil based, hydraulic fluids,water
size	8155
Standard or Nonstandard	standard/Customize
Application	Hydraulic Cylinder

Installation

During installation, some lubricant must be applied to the sealing ring, and at the same time, ensure that the framework oil seal is perpendicular to the axis line. If it is not vertical, the sealing lip of the oil seal will drain the lubricating oil from the shaft, which will also cause excessive wear of the sealing lip. In operation, the lubricant in the shell seeps out a little bit, so as to achieve the best state of forming oil film at the sealing surface.

Advantages

1. Particularly strong wear resistance. 2. Insensitivity to shock loads and pressure peaks. 3. High crush resistance. 4. It has an ideal sealing effect under no load and low-temperature conditions. 5. Suitable for demanding working conditions. 6. Easy to install.

Q1. Are you factory or trading company?
A:We are a manufacturer with independent import and export rights.

Q2. How is the quality of your products?

A:At this point, you can rest assured that we have a complete production management system with a high product qualification rate and will conduct quality inspections on the products produced.

Q3. What is your advantage?

A:Our advantage lies in strong control of product quality, strong productivity, short delivery cycle, etc.

Q4: Do you have products in stock?
Yes, for most porducts, we have.

Forward

Related products