Complaint
Waste Motor Oil Distillation plant can process waste engine oil, used motor oil, black oil, tire oil, plastic oil to clean diesel. This kind of diesel can be used to tractors, trucks, diesel oil generator, power generator etc. Oil recovery average rate: 85%-95%. Unique design and outstanding functions can help customer create more profit. This equipment is matched with pyrolysis plant. It is widely applied in waste oil management industry.
Work Process Of used oil distillation plant
1. Heat the heat conduction oil with the heat conduction oil furnace;
2. The heat conducting oil flows into the coil in the distillation reactor and heats the waste engine oil in the distillation reactor;
3. When the waste engine oil is heated to a certain temperature, the reactor is directly heated with fuel. As the temperature increases,the waste engine oil produces oil and flows into the buffer tank. The odorous light components in the waste engine oil can be distilled and collected into the distillation tank.
4. The oil gas from the buffer tank enters the catalytic tower. In the catalytic tower the macro molecular oil gas are broken down into smaller molecules.
5. Oil gas of small molecules enter the cooling system through the catalytic tower and are cooled into liquid oil;
6. After the oil gas steam out,the distillation reactor memory has plenty of hot asphalt, which can be extracted by the asphalt pump.
| SPECIFICATION OF WASTE OIL DISTILLATION PLANT | |
| Capacity | 3 TON , 5 TON , 10 TON , 30 TON ... |
| Working type | batch type and continuous type |
| Available raw material | Pyrolysis oil, used motor oil , furnace oil , mixed waste oil , hydraulic oil , sludge oil etc. |
| Heating fuel | coal , wood , pyrolysis oil , natural gas |
| Reactor raw material | Q245R steel plate , Q345R boiler steel plate or customized support |
| Machine landing area | 300-400 square meter (various by different capacity) |
| Operators | 2 workers per shift |
| One batch time | 17.5-21.5 hours |
| Life span | 550-750 batches |
| Tyre feeding | Auto-feeding |
| Space cover | 300-400sqm |
a. Reduce pressure distillation technology--- advanced distillation
This new technology is better than original ordinary pressure distillation technology, which shows on purity,Transparent, and lightness. This technology will do deodorization and destinke process to the raw material oil automatically by "dry type" reduce pressure distillation method, which can fall of the temperature of distill process and the oil output will higher 5%-10%.1.Engineers with over ten years' waste to oil recycling experience will be dispatched to your place to provide technical service in guiding plant installation, plant commissioning as well as worker training.
2.We all know that good plant design and quality are essential, and good installation and training service are as important as or even more important than good plant design and quality. It is very dangerous if clients can not install or run the plant properly.
3.So, after plant installation finishes, our engineers are required to help you run the plant for at least 15 batches, enabling your workers to master all the operating skills needed and then operate the plant on their own.
