Complaint
Charcoal briquette mesh belt dryer is a drying equipment that uses steel mesh as a conveyor belt to carry materials for continuous drying. The main heating methods include electric heating, steam heating, and hot air heating. Since the conveyor belt is mesh-shaped, it is especially suitable for drying flake, strip and granular materials with good air permeability, and for regular or irregular lumps such as filter cake paste materials (such as: coal, Charcoal briquettes, various mineral powders, food, vegetables, etc.) are more suitable.
The equipment uses sawdust, shavings, wood scraps, branches, rice husks, peanut shells, sugar cane, cotton stalks, corn stalks, wheat straw, rice straw and other crops in the north and south are used as raw materials. Using our new carbonization technology, ideal carbon powder can be obtained, or the carbon residue left when making charcoal briquettes can be obtained. It can be crushed, milled and stirred, and pressed into shape.
1. Equipped with an automatic tensioning device, the chain plate runs smoothly and can be turned over freely, thus solving the phenomenon of chain dropping, chain jamming, and deviation.
2. The sieve plate is made of heat-resistant steel punched into long strips, which has high strength, no deformation, and good air permeability. The chain plate of the briquette dryer equipment is driven by a speed-regulating motor, which can adjust the operating speed and control the drying time according to the humidity of the freshly pressed briquettes.
3. The temperature of each section inside the body is digitally displayed, which is convenient for the dryer operator to grasp and control the temperature inside the kiln.
4. There is a slag scraping groove at the bottom, and the pulverized coal falling into the bottom of the dryer is automatically scraped by the slag scraper, which realizes automation and saves manpower
5. There is a maintenance channel for each section, which is convenient for equipment maintenance.
The charcoal briquette mesh belt dryer equipment is mainly composed of air inlet unit, exhaust unit, circulating air unit, mesh belt (chain plate), dehumidification system, feeder, transmission mechanism, control system and other components. The briquettes in the hopper are evenly spread on the mesh belt by the feeder, and are dragged by the transmission device to move in the dryer. The drying section is composed of several units. The air is blown in by the blower, and becomes hot air through the heat exchanger to pass through the material layer. , Most of the gas circulates, and a part of the gas with lower temperature and higher moisture content is discharged by the humidity exhaust fan as waste gas.
| Model | JT4-6 | JT4-8 | JT4-10 | JT4-12 |
| Dimension L*W*H(m) | 6*2*2.3 | 8*2.2*2.3 | 10*2*2.3 | 12*2*2.4 |
| Layers | 4 | 4 | 4 | 4 |
| Drying Area(m²) | 29 | 45 | 57 | 69 |
| Capacity (kg/hr) | 100-150 | 200 | 300 | 400 |
| Power (kw) | 15 | 19 | 26 | 27 |
| Operating Hours | 24 hrs continuous working | |||
Founded in 2003, Zhengzhou Jiutian is an enterprise with 200 employees committed to enhancing clients productively, profitability, and safety. Jiutian has developed more than 200 patented products for the drying machine.
Jiutian Machinery products include belt drying machine, flash drying machine, biomass drying and pelletizing production line, feed dregs drying equipment, coal drying upgrading equipment, poultry manure drying equipment, coconut fiber and coir drying machine, and related wood shaving machine, pellet machine, dehydration machine, carbonization furnace, etc.
At present, Jiutian not only has a huge customer resource system and considerable market share in the country but also in the UK, Russia, Greece, Italy, Israel, Morocco, Congo, Côte d'Ivoire, Madagascar, Australia, India, Vietnam, Laos, Indonesia, Malaysia, Sri Lanka. In Chile, the United States and other countries have established a case of dryers and successfully put them into production, to achieve the quality and technology of dryer products and international standards.
Q: What is your Business Model? Trading company or factory?
A: We are a 20 years factory, all our machinery is manufactured by ourselves, factory direct sales, product quality, and after-sales service can be guaranteed.
If you are interested in our products, or if you have any questions, please feel free to contact us, we will give you a reply within 24 hours!
