Galvanized Tie Wire 19 Gauge Max Tw1061t

Min.Order: 2,400

Product origin: Hengshui, Hebei, China

Infringement complaint:

Complaint

US$ 1.6 ~ 1.65

Description

China TW1061T Tie Wire factory for Max Twintier RB441T, RB611T Rebar Tying Guns;

Material: Galvanized Wire,
Black Annealed Wire,
Polyester Coated Wire,
Stainless Steel.

1. Tie Wire 19 Gauge Max TW1061T

Gauge:19 Gauge
Wire diameter: 1.0mm.
Ties per Coil: 170-260
Coil Length:215ft.
Weight: 0.45kg
30 spools/box.
Model: 1.0mm

Brand: Hang Shen

Hang Shen TW06T

ELECTRO-GALVANIZED
BLACK ANNEALED
PLASTIC COATED
STAINLESS STEEL

2. TW1061T is used exclusively for tying rebar with a MAX TwinTier RB441T.
Double the speed, Cost savings, shorter tie Height, save time and tying wire length.
Wire length: 33-34m double wire.
Wire diameter: 1.0mm.
Weight per roll: 0.45 kgs.
Ties per Coil: 170-260
It is ideal for precast or pre-stressed concrete used in marine or other harsh environment applications

3. TW1061T TIE WIRE SPECIFICATIONS

Model No.:	Galvanized Tie Wire 19 Gauge Max TW1061T
Diameter:	1.0MM
Length:	33-34m double wire.
Net weight:	0.45kg/ reel
Material Code:	Galvanized Wire, Black Annealed Wire, Polyester Coated Wire Stainless Steel Wire
Applicable machine:	Max RB441T.
Wraps per Tie:	1
Tensile Strength:	55,800-81,300(lb/in²)

4. TIE WIRE MATERIAL:

Carbon	Mangan	Phosphorus	Sulfur
0.13-0.18%	0.60-0.90%	less than 0.03%	less than 0.035%

5. About our TW1061T Tie Wire
Hang Shen rebar tie wire is made of the ideal grades of carbon steel and stainless steel to suit the environment they must endure.
The rebar tie wire is drawn and dead soft annealed to create the greatest possible ductility which provides a tough but pliable wire which is easy to twist but hard to break.

BLACK ANNEALED
This low carbon steel, dead soft annealed wire is coated with a black oxide finish to provide a thin, mildly corrosion-resistant finish. This commonly used wire meets most construction, precast, and pre-stressed concrete industry applications.

ELECTRO-GALVANIZED
This low carbon steel, dead soft annealed wire is finished with a 5-micron zinc coating to provide greater corrosion resistance. It is ideal for precast or pre-stressed concrete used in marine or other harsh environment applications, or where length of service is important.

PLASTIC COATED
This low carbon steel, dead soft annealed wire is powder-coated with .05mm thickness of yellow polymer (polyester). It is used when tying epoxy coated rebar or other DOT mandated uses, or anywhere a cushioned wire with added protection against corrosion or abrasives is needed.

STAINLESS STEEL
This special stainless steel tie wire widely used for bridge or government building with Excellent rust resistance.

6. Rebar Tie Wire TW1061T For Max Binding Machine RB441T
Wire Diameter 1.0MM.
Also Called Double tie wire for Max tool, and tying wire with two head.
Advantage: Double the speed, Cost savings, shorter tie Height, save time and tying wire length.
Faster, stronger, and easier to handle.
It helps reduce costs and shortens the time required for construction.
The wire height has been reduced by 50%.

7. Rebar Tie Wire - 21 Gauge Galvanized, Annealed, PC Coated, Stainless Steel

Model No.:	Rebar Tying Wire Spool for Max Rb 397 398 399
Diameter:	0.8MM
Length:	100M
Net weight:	0.4kg/ reel
Material Code:	Q195
Applicable machine:	MAX RB392,395,397 ,213,398...
Wire Tensile Strength	420m/Pa
Wire Yield Strength:	330m/Pa
Resistance against rust:	It should be no rust by 4cycles times under instructed test conditions
Tensile Strength:	42-47 KG/CM2
Elongation:	21%
Wire length for one knot:	50-40cm.One reel can tie 120 to 190knots