| item | content | unit |
| Machine tool use | Machined screw rotor | |
| The length of the lathe bed | 3700 | mm |
| Bed width | 1050 | mm |
| Bed guide rail type | The four guide | |
| Maximum machining diameter | Φ320 | mm |
| Maximum workpiece length | 2000 | mm |
| Maximum milling length | 1500 | mm |
| Number of screw heads of workpiece | any | |
| Spindle rated power | 7.5 | KW |
| Rated speed of electric spindle | 3000 | r/min |
| Cutter type | Rod milling cutter | |
| Spindle diameter of tailstock | Φ130 | mm |
| Maximum stroke of tailstock sleeve | 150 | mm |
| Tailstock sleeve mounting taper hole | Morse # 6 | |
| Tailstock cylinder specifications | MOB80×150 | |
| Number of servo control shafts | Workpiece rotation (C-axis) | |
| | Cross saddle (X axis) | |
| | Longitudinal slide (Y-axis) | |
| | Milling head rotation (A-axis) | |
| | Milling head down (Z axis) | |
| Numerical control system | Five axis and five linkage | |
| C axis motor | 38 | Nm |
C axis drive type
| Worm gear and worm
| domestic |
| C axis transmission ratio | 1:30 | |
| Maximum speed of axis C | 50 | r/m(Infinitely variable speed) |
| C axis positioning accuracy | 8 | |
| C axis chuck specifications | K72-315-A28 | |
| The X axis motor | 30 | Nm |
| X axis ball screw specifications | 8010 | domestic |
| X axis guide rail pair type | Roller linear guide rail
| |
| X axis positioning accuracy | 0.02 | mm |
Y motor
| 18 | Nm |
| Y-axis ball screw specifications | 6310 | domestic |
| Y axis saddle guide rail pair type | Roller linear guide rail | |
| Y-axis positioning accuracy | 0.02 | mm |
Z axis motor
| 22(with power-off brake)
| Nm |
| Z axis ball screw specifications | 5010 | domestic
|
| Z-axis bed saddle guide rail pair type | Roller linear guide rail | |
| Z axis positioning accuracy | 0.02 | mm |
| A spindle motor | 18 | Nm |
A shaft drive type A spindle motor
| Worm gear and worm | domestic
|
| A shaft transmission ratio | 1:72 | |
| Chip discharge type | Chain plate
| |
| Chip extractor cooling water pump | High pressure water pump | 450W |
| Machine tool protection | Full protection | |
| Machine tool dimensions | 5000×2100×2100 | |
| Machine weight | ≈11 | ton |
Complaint
