10g Plates Cold Plasma Generator Ozone Disinfection Machine Air Purifier

 

Ozone is broadly used in the bottled water market due to its safety, simplicity and effectiveness. The ozonation process for bottled water involves a low concentration of ozone dissolved into the water, just before bottling, to disinfect the water, bottle, and cap. The process and system design are relatively straightforward. An integrated ozone injection system consists of an ozone generator, venturi injector, and recirculation pump. The in-process water enters a storage tank with a side loop, where ozone is injected into the water. The excess ozone off-gases from the water and exits through an ozone destruct at the top of the tank. The water then continues to the next step in the process, which differs depending on where the system is placed in the process. Ozone sensors can be used to monitor the ozone concentration at the injection point, the outlet of the storage tank, after the destruct unit, and at the point of use.
Large Ozone Generator 30-60kg/h

(kg/h) Ozone production	30	50	60
Air source type		Compressed air

 

(mg/L)  Ozone concentration

25-35

 

(kw/h) Power consumption	480	800	960
(m/h) Cooling water flow	90	150	180

Dimensions  (mm)     6200*4100*2600 7200*4800*2700 7200*5000*2800

Large Ozone Generator 8-20kg/h

(kg/h) Ozone production	8	15	20
Air source type		Oxygen
(mg/L)	120-150
Ozone concentration
(kw/h) Power consumption	56	105	140
(m/h) Cooling water flow	16	30	40
(mm)	3600*1500*2200	4500*1800*2200	3500*3000*2400

Large Ozone Generator 1-5kg/h

(kg/h) Ozone production	1	3	5
Air source type		Oxygen
(mg/L)	120-150
Ozone concentration
(kw/h) Power consumption	7	21	35
(m/h) Cooling water flow	2	6	10
(mm)	1600*800*2200	2200*1200*2200	2800*1200*2200
Dimensions

 

1.Q:Where is your factory located? How can I visit there?
A:We are the professional gas equipments, founded in 2008. Our factory is located in Beijing China . Welcome to visit us!
2.Q:What's your delivery time?
A:As usual 40 days,if urgently order,pls contact our sales in advance.
3.Q:How does your factory do regarding quality control?
A:Quality is everything. we always attach great importance to quality controlling from the very beginning to the very end. Our factory has gained ISO9001 and CE certificate.
4.Q:What's payment term?
A:T/T, L/C etc.Also we could accept USD, RMB, Euro and other currency.
5.Q:How about your after-sales service?
(1) Provide customers with installation and commissioning online instructions.
(2) Well-trained engineers available to overseas service.
(3) Worldwide agents and after service available.