Description
OEM ISO Certificate Customized Air Filter Metal End Cap
1---Product description
The filter end cap mainly serves to seal both ends of the filter material and support the filter material. The filter end caps are stamped into various shapes as needed from the steel sheet.
Dongjie has been specializing in metal filter end caps since 1996 with a wide range of existing molds for air filter end caps for the cartridge filter.
We are able to advise customers on the best material proper thickness opt for and we can be customized according to your needs. Welcome to contact us to have further discussion.
| Product Name | OEM ISO Certificate Customized Air Filter Metal End Cap |
| Material | Galvanized steel, stainless steel, anti-fingerprint, copper/brass, etc customized |
| Thickness | 0.30 mm to 3.00 mm |
| Outer Diameter | 20.00 mm to 1000 mm |
| Types | Open/closed, with/without holes, customized |
| Delivery Time | According to customer's requirement |
| Packing | Polybag/Piece or customized |
| Applications | Dust filters, air filter, fuel filter, oil filter, air compressor, water filter, activated carbon filters cartridges, etc. |
| OEM | Available |
| Quality Control | ISO Certification |
| After-sale Service | Product test report, online follow-up. |
| Open Round End Cap with Tri-Bolt Holes |
| | Inches | Millimeters |
| Outer diameter | 12.75 | 323.85 |
| Inner diameter | 8.5 | 215.9 |
| Inner height | 0.54 | 13.716 |
| Outer height | 0.5 | 12.7 |
| Inner rim diameter | 6.75 | 171.45 |
| Open Round End Cap with Outer Lip |
| | Inches | Millimeters |
| Outer diameter | 12.75 | 323.85 |
| Inner diameter | 8.5 | 215.9 |
| Inner diameter | 0.625 | 15.875 |
| Outer height | 0.368 | 9.3472 |
| Lip | 0.375 | 9.525 |
| Open Round End Cap |
| | Inches | Millimeters |
| Outer diameter | 12.75 | 323.85 |
| Inner diameter | 8.5 | 215.9 |
| Inner height | 0.5 | 12.7 |
| Outer Height | 0.5 | 12.7 |
| Closed Round End Cap |
| | Inches | Millimeters |
| Outer diameter | 12.75 | 323.85 |
| Inner diameter | 8.375 | 212.725 |
| Inner height | 0.5 | 12.7 |
| outer height | 0.5 | 12.7 |
| Closed Round End Cap with Bolt Hole |
| | Inches | Millimeters |
| Outer diameter | 12.75 | 323.85 |
| Inner diameter | 8.375 | 212.725 |
| Inner height | 0.5 | 12.7 |
| Outer height | 0.5 | 12.7 |
| Bolt Hole | 0.625 | 15.875 |
| Open Round End Cap with Flange |
| | Inches | Millimeters |
| Outer diameter | 5.75 | 146.05 |
| Inner diameter | 2.5 | 63.5 |
| Inner height | 0.5 | 12.7 |
| Outer height | 0.278 | 7.0612 |
| Closed Round End Cap |
| | Inches | Millimeters |
| Outer diameter | 5.25 | 133.35 |
| Inner diameter | 2.5 | 63.5 |
| Inner height | 0.875 | 22.225 |
| Outer height | 0.172 | 4.3688 |
The above is part of our filter cover specifications for your reference. If you need other shapes, we can customize them.2---Product show 3---About us
Enterprise introduction Anping Dongjie Wire Mesh Producis Co.,Ltd., located in Anping, China is a specialized manufacturer for the development, design and production of expanded metal mesh, perforated metal mesh, decorative wire mesh and stamping parts for decades. As always stuck into "Quality Proves Strength, Details Reach to Success", Dongjie achieves highly acclaim in the old and new customers.
High quality products
High quality products are fundamental to the development of enterprises, Dongjie in strict quality control at the same time, every link of the products are strict quality inspection, to ensure high standards of factory.
4---Productive process
Customer service
Our facotory has more than 25 years of production experience, and there are more than 1500 sets of molds, and molds of the same specifications can be selected from the mold library according to customer requirements. If there is no corresponding mold, we also have the ability to make OEM & ODM filter end caps. Dongjie has advanced mold creating machines and our own mold opening technicians. We can make the mold according to the customer's drawings or samples sent to us.
5---Certificattion
6---Packing&delivery
7---FAQ
Q1:How to make an inquiry of Filter End Cap?
A1: You need to provide material, thickness of the material, drawing of the end cap including inner diameter, outer diameter and the quantity to ask an offer. You can also indicate if you have any special requirement. We can recommend according to your application also if you need our help.
Q2:Could you provide free sample?
A2:Yes, we can provide free sample together with our catalogue if we have stocks. But the courier charge will on your side. We'll send back the courier charge if you make an order.
Q3:How is your Payment Term?
A3:Generally, our payment term is T/T 30% in advance and the balance 70% before shipping. Other payment term we can also discuss.
Q4:How is your delivery time?
A4:Generally, we will calculate the production time according to the process and quantity of the product. If you are very anxious, we will coordinate with the production department.
Complaint
