Restaurant 433MHz RF Customer Calling Systems Long Distance Pager System

Min.Order: 10
Product origin: Shenzhen, Guangdong, China
Infringement complaint: complaintComplaint
US$ 142 ~ 162

Description
Long Distance Pager System Restaurant 433MHz RF Customer Calling Systems
HostPager
Input PowerDC12V/2ABatteryLi-ion 3.7V 300mAh
Frequency433.92MHzFrequency433.92MHz
Transmit Power26dBmStandby Current<12mA
Standby Power <120mWStandby Duration10h
Modulation TypeFSKSensitivity-115dBm
Max Capacity998 pagersMax Distance800m-1000m
Dimensions190*130*40mmPrompt ModeVibration/Buzzer/Flashing
OutputDC5V/2A*2Prompt Time30s
 
  1. Instructions for Use
  1. Before using
Wiring: Host connects to power source via adapter. Charging base connects to host via Type-C cable.
The pager is placed on the charging base. The charging indicator on the pager lights up to indicate normal status.
Charging Indicator Information:
FlashingCharging
Always OnFull Charged
  1. Operating Instruction
CALL mode is the default mode. Continuously press Delete button () to return Call Mode while in other mode. C--- is displayed in CALL mode.
Input the number and press CALL button to call the corresponding pager.
 
  1. Mute mode
Press MUTE and 999 (S999 displayed) then press CALL, all charging pagers change to MUTE mode.
Press MUTE and 000 (S000 displayed) then press CALL, all charging pagers change to normal mode.
In MUTE mode, all pagers only vibrate and flash while being called.
Continuously press DELETE button () to return CALL mode. (C--- displayed)
  1. Call History
Press ∨/∧ button to query call history. 
Continuously press DELETE button () to return CALL mode. (C--- displayed)
Maximum 10 recent called records can be queried.
Note: No looping of ∨/∧.
  1. One-Call-Off
In CALL mode, press 999 and CALL, all charging pagers will be off. Re-charge pagers will turn on again.
Note: This instruction is invalid to the pagers not being charged.
  1. Program Operation
All pagers are programmed before delivery. So this operation is only necessary when adding new pagers or changing numbers.
Put the pagers on the charging base, press P and 999 (P999 displayed), then press CALL to enter programming mode. The operation must be finished in 20 seconds after pagers are charged.
In programming mode, all LED display of the pagers will keep flashing.
Then input number and press CALL, all pagers display this number. Move the top pager away, the pager will beep once and stop flashing. It means the pager is programmed.
Repeat the steps to program other pagers.
Note: The pagers will quit programming mode if no operation within 1 minute. All pagers' numbers will not change if not being programmed.
1 pager only can be programmed 1 number. Old number will be replaced by the new one.
  1. Instruction Description
InstructionButtonsDisplayFunction
Programming ModeP+999+CALLP999To enter programming mode
History∨/∧H + NumberQuery recent 10 call records.
Pager Mute Mode+999+CallS999All charging pagers switch to MUTE mode.
Quit Pager Mute Mode+000+CallS000All charging pagers quit MUTE mode.
Host Mute Mode+998+CallS998Host switch to MUTE mode.
Quit Host Mute Mode+997+CallS997Host quits MUTE mode.
Call pagers[Number]+CallC+[Number]The corresponding pager alerts.
  1. Common Troubles and Solutions
TroubleAnalysisSolution
The pager can't be programmed.1.The pager is not being charged.
2.Charging is more than 20s.
1. Make sure the pagers are well charged.
2. Try again within 20s after recharging.
The pager can't be One-Call-OffThe pager is not being charged.Make sure the pagers are well charged and try again.
The pager doesn't response.1. The pager is out of power.
2. Out of call range.
1.Use after full charged.
2.Use within range of call.


Product Tag:
Related categories:
Scroll to Top