Complaint
Greenhouse advantages: Energy saving, low operating cost, fast temperature increase, good thermal insulation effect, good light transmission performance, high light utilization rate, easy operation, ventilation and moisture removal, easy management | |
| Structure | Hot dip galvanized steel |
| Greenhouse area | 480sqm |
| L*W | 60*8m |
| Column space | 120*120*3.75 square pipes with hot dip galvanized |
| Around the dado height | 0.6m |
Span | 12m |
Covering | Polycarbonate sheet(8mm) |
| Eaves height | 6m |
Snow load | 0.30KN/m2 |
Dead load | 20KG/m2 |
Maximum rainfall | 140mm/h |
Hanging load | 20.5kg/m2 |
The advantages of hot dip galvanizing frame assembly in greenhouses
1. Long service life
The comprehensive service life is more than 15 years.Skeleton's more than 30 years.
2. Higher wind resistance
3. Factory production.
Polycarbonate plate advantage | (1) Light transmittance: The light transmittance of PC solar panel can reach up to 89%, which can be beautiful with glass. UV coated board will not produce yellowing, fogging, and poor light transmission when exposed to sunlight. After ten years, the loss of light transmission is only 10%, the loss rate of PVC is as high as 15%-20%, and the loss rate of glass fiber is 12%. %-20%. |
| (2) Impact resistance: The impact strength is 250-300 times that of ordinary glass, 30 times that of acrylic sheets of the same thickness, and 2-20 times that of tempered glass. There is no crack when dropped from two meters below a 3kg hammer. Glass" and "Sound Steel". | |
| (3) Anti-ultraviolet: One side of the PC board is co-extruded with anti-ultraviolet (UV) coating, and the other side has anti-condensation treatment, which integrates the functions of anti-ultraviolet, heat insulation and anti-fog droplets. It blocks UV rays from passing through and is suitable for protecting valuable artwork and exhibits from UV damage. | |
| (4) Light weight: the specific gravity is only half of that of glass, saving the cost of transportation, handling, installation and supporting the frame. | |
| (5) Flame retardant: The national standard GB8624-2006 confirms that the PC solar panel is Class B flame retardant. The ignition point of the PC board is 580 ºC, and it will self-extinguish after leaving the fire. No toxic gas will be produced when burning, and it will not contribute to the spread of the fire. | |
| (6) Bendability: According to the design drawing, the cold bending method can be adopted on the construction site, and it can be installed into an arch, semi-circular top and window. The minimum bending radius is 175 times the thickness of the plate, and it can also be hot bent. | |
| (7) Sound insulation: PC sunlight board has obvious sound insulation effect, and has better sound insulation than glass and acrylic board of the same thickness, under the same thickness conditions |
| The embedded part is a bridge link used to connect the main steel frame structure of the greenhouse and the foundation. | Concrete needs to be poured twice, because it is not in contact with air, so there is no problem of rust affecting life. | The main function of the column is to support the arch rod and prevent it from bending. | The general structure is complete. With unrightly column. | Inner structure show. Top and all around covered 8mm pc board. | Inner install cooling pad: Quality wet curtain paper, aluminum alloy frame, water-wastewater system |
| The exhaust air volume is 44000m3/h, and the power of the single machine is 1.1kW With cooling pad can reduce the temputer 5 by 10ºC | Integration of water and fertilizer | Coconut planting | Hanging system | IOT(Internet of things) | Control cabinet |
| Sowingseedlings: Sow the seeds evenly into the soil, about 3-4 days to germinate. | When the tomatoes have two or three leaves, transplant and colonize them. | Coconut planting and drip irrigation facilitation them to grow. | Then you will get tomato fruit. | ||
| Factory Visit | We warlmy welcome customers to visit our company to see our production and quality. |
Production workshop
Modern equipment
Each process is strictly controlled to prevent unqualified products from flowing into the next process, so that the entire production process is a virtuous circle
Qingzhou Xinhe Greenhouse Horticulture Co.,Ltd located in Shandong Province,has focused on greenhouse designing, manufacturing and construction for over 16 years.
In the passing years, Xinhe Grennhouse helps our customers from China and overseas markets build hundreds of different types of greenhouses for vegetable planting, flower planting and many other uses.
Besides the mainland market, Xinhe Greenhouse is aggressive enough to extend our overseas markets.
| 1 | Project Design | We will make design proposals of greenhouse solution as customers requirement. |
| 2 | Competitive Price | With rich manufacturing and sales experience, we can quote quickly and competitively. |
| 3 | Samples Supply | We can send samples to customers as required. |
| 4 | Quality Control | We'll guarantee to supply products strictly as customer's quality requirements. |
| 5 | After-sales service | We'll supply installation instruction with the goods, on-line service. We also can dispatch technicians overseas for installation and usage guidance. |
We offer competitive price with ensured quality,fast reply, 24 hours on line !!! Win Hearts, Not Just Orders . | ||
Q: As we have different type equipments, please indicate following details in your inquiry email.
A: (1) The specific area (L*W)
(2) Product usage/system type
(3) The requiement of covering, structure,material, temperature, humidity and light intensity. These are very important for providing you a complete solution.
Q:What is the minimum order quantity?
A:The minimum order quantity is 1000 square meters.But if below 1000 square meters,we also can produce it.The price is adjusted according to the quantity of order.
Q: Are you a manufacturer or trading company?
A: We are a manufacturer, and produce these equipment that has more than ten years of experience All you are warmly welcomed to visit us!
Q:How are the goods packed?
A:The sun PC board is packed in cartons. The skeleton is in bulk and the parts are packed in a package. We can also pack the goods according to the customers' requirements.
Q. What is the basic configuration of a greenhouse?
A: A greenhouse is equipped with the steel frame, inner shading system, external shading system, wet curtain, blower, roof ventilation, side ventilation.
