Single Mast Work PlatformModel: STC100 Rated load when the platform reaches its max. length: 1000 kg Max. carrying capacity: 3 persons Rated lifting speed: 8.3 m/min.... | |
Double Mast Work PlatformModel: STC100 Rated load when the platform reaches its max. length: 1400kg Max. carrying capacity: 6 persons Rated lifting speed: 8.3 m/min |
Features of Mast Climbing Work Platform
1. The length and width of our mast climbing work platform are adjustable, so as to suit building's different facade shapes. In addition, some parts of the work platform are telescopic. This enables the platform to be combined into concave-convex shape that fits the building external wall shape, thus better meeting the work requirement.
2. The use of our mast climbing work platform involves no base prefabrication, which greatly facilitates change of work locations.
3. This construction equipment is equipped with many protection devices.
a. The electrical system is designed with creepage, overheat and phase sequence protectors.
b. The work platform uses auto reset upper/lower limit switch and ultimate limit switch without auto reset function, which provide double protection to avoid overtravel at the top and bottom.
c. The overload sensor helps eliminate over-torque operation of the mast climbing work platform.
d. The double mast climbing work platform has an automatic leveling mechanism to automatically adjust the synchronous lifting operation of the two drive devices of the double mast, which can effectively control the work platform tilt. The vertical tilt angle is controlled within 2 degrees.
No. | Name | |
1 | Mast section | |
2 | Drive unit | |
3 | Long balustrade | |
4 | Short balustrade | |
5 | Long platform | |
6 | Short platform | |
7 | Electrical system | |
8 | Base frame | |
9 | Ladder | |
10 | Side frame | |
12 | Mast tie | |
13 | Electrical winch |
No. | Item | Single mast climbing work platform |
1 | Model | STC100 |
2 | Rated load when the platform reaches its max. length | 1000 kg |
3 | Max. carrying capacity | 3 persons |
4 | Rated lifting speed | 8.3 m/min |
5 | Max. operating height | 150 m |
6 | The distance above the last tie-in | 4.0 m |
7 | Max. length of platform | 8.8 m |
8 | Basic platform width | 1.5 m |
9 | Max. platform width after extension | 2.5 m |
10 | The first tie-in from the ground | 3~4 m |
11 | Tie-in spacing | About 6m |
12 | Standard section size | 1508×500×500 mm |
13 | Motor model | TYHI100L1-4 |
14 | Motor power | 2*2.2kW |
No. | Item | Double mast climbing work platform |
1 | Model | STC100 |
2 | Rated load when the platform reaches its max. length | 1400kg |
3 | Max. carrying capacity | 6 persons |
4 | Rated lifting speed | 8.3 m/min |
5 | Max. operating height | 150 m |
6 | The distance above the last tie-in | 4.0 m |
7 | Max. length of platform | 23.6 m |
8 | Basic platform width | 1.5 m |
9 | Max. platform width after extension | 2.5 m |
10 | The first tie-in from the ground | 3~4 m |
11 | Tie-in spacing | About 6m |
12 | Standard section size | 1508×500×500 mm |
13 | Motor model | TYHI100L1-4 |
14 | Motor power | 4*2.2 kW |