Complaint
| SPECIFICATIONS | |||||
| OUTPUT | |||||
| Model | SCN-1500-12 | SCN-1500-24 | SCN-1500-27 | SCN-1500-48 | |
| DC Voltage | 12V | 24V | 27V | 48V | |
| Rated Current | 125A | 100A | 62.5A | 32A | |
| Current Range | 0-125A | 0-100A | 0-62.5A | 0-32A | |
| Rated Power | 1500W | 1500W | 1500W | 1536W | |
| Ripple & Noise | 120mVp-p | 150mVp-p | 240mVp-p | 480mVp-p | |
| Voltage Adj. Range | 10.8~13.2V | 20~26.4V | 24~30V | 41~56V | |
| Voltage Tolerance | ±5% | ±5% | ±5% | ±5% | |
| Inlet Stability | ±1% | ±1% | ±1% | ±0.5% | |
| Load Stability | ±1% | ±1% | ±1% | ±0.5% | |
| Setup, Rise, Hold Up Time | 800ms, 50ms, 16ms at full load | ||||
| Voltage Range | 200~260 VAC 47~63 Hz;290~370VDC | ||||
| AC Current | 12A/230VAC | ||||
| Efficiency | 83% | 84% | 85% | 87% | |
| Inrush Current | 120A/230V | ||||
| Leakage Current | <3.5mA/240VAC | ||||
| Over Load | 110%~135% Type: plusing hiccup shutdown Reset:auto recovery | ||||
| Over Temp. | RTH>=80 output shutdown | ||||
| Working Temp., Humidity | -10ºC~+60ºC(Refer to output derating curve),20%~90%RH | ||||
| Storage Temp., Humidity | -20ºC~+85ºC, 10%~95%RH | ||||
| Temp. Coefficient | ±0.03%/ºC(0~50ºC) | ||||
| Vibration | 10~500Hz,2G 10min,/1cycle,Period for 60min,Each X.Y.X axes | ||||
| Withstand Voltage | I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC | ||||
| Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC | ||||
| Safety Standard | Design refer to UL1950,CSA22.2,IEC60950 | ||||
| EMC Standard | Design refer to FCC Part 15 Class A | ||||
| Dimension | 280*178*125mm(L*W*H) | ||||
| Weight | 5.0Kg | ||||
| NOTE | 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives. | ||||
