Complaint
Working principle
The laser beam from the laser (through the beam expander mirror) enters the marking head, and after the reflection of the scanning oscillator 1 and scanning oscillator 2 reaches the f-Theta flat field lens, through which the lens is focused to form a high energy spot (15-20μ) with a small area. The scanning oscillator is driven by a highly sensitive detector-type motor, and the computer control system controls these two motors to deflect at a certain angle, while controlling the laser beam off and on, finally marking the required symbols and patterns on the workpiece.
Product features
1.It can process a variety of metal and non-metal materials. Especially for high hardness, high melting point and brittle materials, the marking is more advantageous.
2.Non-contact processing, no damage to the product, no tool wear, and good marking quality.
3.The laser beam is fine, the processing material consumption is small, and the processing heat affected zone is small.
4.High processing efficiency, computer control, and easy automation.
| Style | Cabinet |
| Power | 20W/30W/50W |
| Laser Brand | Raycus (Maxphotonics/lianpin) |
| Galvanometer | Sino |
| Main board | Beijing JCZ |
| Software | EZCAD 2.14.10 |
| Marking Area | 110mm*110mm |
| Optional Marking Area | 70mm*70mm / 150mm*150mm /200mm*200mm |
| Marking Depth | ≤0.5mm |
| Marking Speed | ≤7000mm/s |
| Minimum Line Width | 0.012mm |
| Life-span of Fiber Laser Module | 100, 000hours |
| Beam Quality | M2 <1.5 |
| Output Power of Laser | 10%~100% continuously to be adjusted |
| System Operation Environment | Windows 7/8/10 |
| Cooling Mode | Air cooling--Built-in |
| Temperature of Operation Environment | 15ºC~35ºC |
| Power Input | 220V / 50HZ / single phase or 110V / 60HZ / single phase |
| Power Requirement | <600W |
| Communication Interface | USB |
| Package Dimension | 100*79*106cm |
| Net Weight/gross weight | 80KG/125KG |
| Optional (Not free of charge) | Rotary Device, Moving Table, other customized Automation |
