Large-Scale Breeding Broiler Equipment Demonstration Plot

Large-scale breeding broiler equipment demonstration plot
Product Info

1.

Basket system

unit type	specification	number of plies	interfloor distance	Notes
HLY-1100	1.1m*1.35m	3/4	700mm	Chicken and duck cage
HLY-1250	1.25m*1.35m	3/4	720mm	Chicken and duck cage
HLY-2000	2.0m*2.0m	3/4	800mm	Three-dimensional network to raise

• Basket is introduced

   

1)The length of the tail is 1.55 meters, the length of the nose is 1.5 meters, the length of the middle cage frame is 2.0 meters, and the height of the equipment is 3.45 meters.
2)The layer spacing was 0.8 m, the width was 2 m, the water line was 2, and the bottom manure belt was 0.2 m above the ground.
3)Cage bolts use stainless steel material, high strength, strong corrosion resistance.
4)The floor heating pipeline is installed on the side, which is easy to install and maintain, save costs, increase the overall temperature and keep the heating effect unchanged.
5)The first and second layers are equipped with observation catheter, which is convenient for observation and later catching duck, reducing labor intensity and equipment damage.

• Cage dominance comparison

   

cage model	Edge contrast
HLY-1100	Using single pasta trough, the cost is relatively reduced. Reasonable allocation of breeding quantity and trough intake ratio to avoid waste of feed.
HLY-1250	The space utilization rate is high, the economic benefit is high.
HLY-2000	The existing market space utilization rate is the highest, and the breeding benefit is maximized.

The bottom net is supported by 20mm round tube, with high structural strength. The material is the whole hot-dip galvanized round tube, the wall thickness is 1.5mm, corrosion resistance, does not affect the feces and cleaning, and the later maintenance is convenient. Both ends of the tube pretend to be rubber sleeve, beautiful and not easy to scratch; Both ends of the round tube are fixed to prevent falling off.
2.Drinking water system

• Introduction to Drinking Water System

1. Use 360° nipple, 80-150 ml/min, large water yield, good sealing.

2. Water pipe adopts square pipe, high strength, not easy to deformation; Good toughness, not easy to break; High pressure, easy to wash.

3. Filter and dosing device are equipped at the front of the water line to ensure clean drinking water, automatically dosing, and reduce epidemic prevention labor intensity.

4. Add automatic recoil device to clean the inside of water line regularly to keep drinking water clean.

5. Two sets of water supply systems are adopted to improve the efficiency of drinking water and ensure the safety of drinking water.
 

 

3.

Feeding system

• The current feeding method is divided into: span bucket type and driving type.

1, the feeding system is composed of: tower - oblique feed line - transverse feed line - feeding lane (straddle hopper feeding car) - trough.
2, straddle hopper feeding car with feeding mouth homogenizer, by adjusting the size of the feeding mouth of the homogenizer, to ensure uniform hopper feeding.
3, sowing type feeding vehicle adopts sowing type feeding, feeding motor separately controlled, can control the feeding uniformity by adjusting the size of the feeding mouth, can realize fault feeding, using a simplified chain drive, low failure rate, easy maintenance.
4.

Nightsoil system
Longitudinal fecal removal system
1. The frame of the fecal cleaner is galvanized sheet with smooth surface to avoid scratching the fecal belt.
2, passive spiral roller is nylon material, spiral structure, can effectively remove feces, keep the feces clean.
3, the active roller and rubber press roller with high strength rubber hanging glue, increase friction, not easy to slip deflection, protect the manure belt.
4. Double-layer scraper can effectively remove the attached feces and keep the feces clean.
5. The manure belt is made of high quality PP material, acid and alkali resistance, good toughness, anti-aging, long service life and corrosion resistance.

5.Illuminating system
1, the use of high quality LED lighting devices, ensure the illumination, ensure the quality, after the experimental demonstration of the erection height, to ensure that each layer has enough light.
2. Cooperate with the dimmer and the environmental controller to realize the controllability of illumination, regularly open and close, and adjust the illumination brightness according to the requirements of breeding.
3, the use of high quality cable and electrical components, long life, aging resistance, to ensure safety and reliability.

• Production scenarios