Manufacture Silicone Coated Fiberglass Insulation Sleeving

Min.Order: 5,000

Product origin: Shenzhen, Guangdong, China

Infringement complaint:

Complaint

US$ 0.4 ~ 0.5

Description

Manufacture Silicone Coated Fiberglass Insulation Sleeving

Model Number:SB-SGS-15
Max Temperature Rating: 200ºC, Max Working Voltage: 600V

Structure
The material content of the SB-SGS-15 is Non-Alkali Fiberglass Braided then coated with silicone resin and treated in high temperature

Usage
SB-SGS-15 sleeving with its good dielectric strength, flexibility and flame retarding properties make it high performance qualities. It can be widely used in insulated or partially insulated conductors, bus bars, component leads, or assemblies of electrical components etc.

Specification

Item	Performance		Note
Dielectric breakdown voltage KV AC	Minimum average	≥1.5	Before aged
	Minimum single point	≥1.0	Before aged
	Minimum average	≥1.0	6 HRS* 245±5ºC 245±5ºC 6HRS Aging
	Minimum single point	≥0.7	6 HRS* 245±5ºC 245±5ºC 6HRS Aging
	No breakdown	/	1 KV IN 2% Salt water
Thermal endurance	No indication of crack	OK	1440 HRS* 235±5ºC 235±5ºC 1440HRS Aging
Fire resistance	VW-1	OK	UL 1441

Dimension

Inside Diameter		Wall thickness (mm)	Standard package (m/roll)
Nominal (mm)	Tolerance (mm)	Wall thickness (mm)	Standard package (m/roll)
φ0.5	+0.2, -0.1	≥0.30	200
φ1.0	+0.2, -0.1	≥0.30	200
φ1.5	+0.2, -0.1	≥0.30	200
φ2.0	+0.2, -0.1	≥0.30	200
φ2.5	+0.3, -0.1	≥0.35	200
φ3.0	+0.3, -0.1	≥0.35	200
φ4.0	+0.3, -0.1	≥0.35	200
φ4.5	+0.3, -0.1	≥0.40	100
φ5.0	+0.3, -0.1	≥0.40	100
φ6.0	+0.3, -0.1	≥0.40	100
φ7.0	+0.3, -0.1	≥0.45	100
φ8.0	+0.3, -0.1	≥0.45	100
φ9.0	+0.3, -0.1	≥0.55	100
φ10.0	+0.3, -0.1	≥0.55	100
φ12.0	+1.0, -1.0	≥0.55	50
φ14.0	+1.0, -1.0	≥0.55	50
φ16.0	+1.0, -1.0	≥0.55	50
φ18.0	+1.0, -1.0	≥0.55	50
φ20.0	+1.0, -1.0	≥0.65	25
φ25.0	+1.0, -1.0	≥0.65	25
φ30.0	+1.0, -1.0	≥0.65	25

17 years of experience in the source factory, catching up with international brands has always been Sunbow's goal.

1. If you want a good fiberglass sleeve, you can only pay for it at Sunbow;

2. Sunbow fiberglass sleeve, the quality is in the top three;

3. Benchmarking international brands, Sunbow is difficult to be replaced;

4. Supporting new energy car companies, Sunbow fiberglass tube is invincible;

5. Compared with the same period of last year, the delivery time of glass fiber pipes is one-third faster than Sunbow;

6. 20 Fortune 500 companies are using it, and more than 1,000 customers agree.

Reliable laboratory


Constant Temperature and Humidity Test Chamber	VW-1 UL Flame Retardant Tester	Withstand Voltage Tester

Certificate display

Customer case
If you want a good glass fiber tube, you can only go to SUNBOW to pay the bill in China.

I am very confident to say that SUNBOW's glass fiber pipes have no competitors in the domestic market. If you want to manage the glass fiber tube well, you can only go to Shunbo to pay for it.

Many domestic counterparts say that they have super tear-resistant and super-wear-resistant fiberglass tubes, and they fool customers into saying that they do not break at all. In fact, they are deceiving customers. As long as they are tested by customers, they will be full of loopholes immediately. Only after numerous comparative tests can we prove that only SUNBOW's glass fiber tubes are really good tubes and truly invincible.

Zhejiang Ningbo Yiyi Transformer Co., Ltd. found us through the introduction of a friend. He heard from his friend that the quality of our Shunbo fiberglass pipe is very good. He asked if we can provide super tear-resistant and super-wear-resistant fiberglass pipe, which requires a force of 6.9g. /d or so, we say yes. The customer said that he should not be in a hurry to make promises, because he has found several suppliers, but the results are not satisfactory. The customer emphasizes that it does not break at all during use, and requires high wear resistance and strong tear resistance.

We understand the customer's requirements. The characteristics of this glass fiber tube focus on the quality of the raw material yarn and the preparation of silicone oil. The customer said that they used a counterpart in Dongguan before. The transformer was damaged within a few times, and the voltage dropped so much that the inside of the transformer conduit could not be insulated. The customer's transformers are all exported to Europe and the United States, so there is no way to ship them now, and there may be a risk of returning the products sent out earlier.

According to the customer's application requirements, we recommend SB-SGS-40 in the glass fiber tube series. The tensile strength is 6.3~6.9g/d. The next day, we sent a sample of several meters to the customer for testing. The customer tested it for several days, including more than 245 hours of burn-in, which is more demanding than ordinary transformers. At the same time, 2 peers also sent samples. As soon as the results came out, only SUNBOW's samples passed the test. The customer immediately decided to switch to Shunbo's glass fiber tube for all products. So far, there have been no quality complaints in nearly 2 years of mass production.

SUNBOW Shunbo is one of the few manufacturers in the industry that uses fully automated yarn beating machines, high-speed braiding machines and fully automated pipe-passing machines to produce glass fiber tubes. It improves the production efficiency, ensures the consistency of products, and also implements the system requirements of IATF16949.

Shunbo's glass fiber tubes have been supplied to Mercedes-Benz, Huawei and other well-known enterprises in batches, and are now a well-known brand in China. If you want to manage the glass fiber tube well, you can only go to Shunbo to pay for it.

Forward

Related products