Complaint
PROPERTIES | VALUES | RULES |
Density | 1.19 g/cm3 | ISO 1183-1:2012 Method A |
Rockwell Hardness | 112L | ISO 2039-2:1999 |
Tensile Modulus | 3150MPa | EN ISO 527:2012 |
Tensile Strength | 80.0MPa | EN ISO 527:2012 |
Tensile Strain at Break | 3.2% | EN ISO 527-1:2012 |
Water Absorption | 0.20% | ISO 62:2008 Method 1 |
Total Luminous Transmittance | 93.4% | ISO 13468-1:1996 |
Vicat Softening Temperature | 105ºC | ISO 306:2013 Method B50 |
Light Ageing Test- UV Exposure | Grey scale: 5 | ISO 4892-3:2016 Cycle 1 |
Mean Coefficient of Linear Thermal Expansion | 72×10-6 K-1 | ISO 11359-1:2014 |
Compressive Stress at Yield | 129MPa | EN ISO 604:2003 |
Flexural Strength | 120MPa | ISO 178:2013 |
Compressive Yield Strength | 111MPa | ASTM D695-15 |
Compressive Modulus | 3450MPa | ASTM D695-15 |
Shear Strength | 59.7MPa | ASTM D732-17 |
Deflection Temperature under Load | 100.2ºC | ASTM D648-18 Method B |
Modulus Elasticity | 2810MPa | ASTM D695-15 |
Normal Cast Acrylic Sheet | |||
Code | Thickness | Size with Rubber edge | Size after cut edge |
D | 2.8-12 mm | 1550x3050 mm | 1510x3020 mm |
M | 2.8-12 mm | 2050x3050 mm | 2000x3000 mm |
Q | 1.8-30 mm | 1260x1870 mm | 1220x1830 mm |
L | 1.8-30 mm | 1270x2490 mm | 1220x2440 mm |
Large L | 2-25 mm | 1330x2550 mm | 1250x2500 mm |
Large Q | 2-25 mm | 1330x1940 mm | 1250x1850 mm |
Y | 2-15 mm | 1820x2480 mm | 1750x2440 mm |
E | 2.7-12 mm | 1650x2650 mm | 1610x2600 mm |
Z | 2.5-15 mm | 1560x2560 mm | 1500x2500mm |
T | 1.8-30 mm | 1250x2450 mm | 1200x2400mm |
H | 1.8-30 mm | 1250x1850 mm | 1200x1800mm |
Single Side Frosted | 2-15 mm | 1270x2490 mm | 1220x2440 mm |
Single Side Frosted M | 2.8-11.6 mm | 2050x3050 mm | 2000x3000 mm |
Double Side Frosted | 2-15 mm | 1250x1850 1250x2450 mm | 1220x1830 1220x2440 mm |
Application Characteristics of GRANDVIEW |
absolutely colorless and clear |
break-resistant to impact-resistant |
unequalled resistance to weathering and aging |
high-quality surface and planarity; high-gloss, textured or satin |
solid sheets, blocks, tubes, round and square rods |
2 mm to 300 mm solid sheet/block thickness |
standard sizes up to 3050 x 2030 mm |
over 40 standard colors |
good resistance to diluted acids and to alkalis, limited resistance to organic solvents |
very easy to work, similar to hardwood |
easy to thermoform over a wide range of conditions |
easily and firmly bonded, e.g. with reaction adhesives |
burns more or less like hardwood; very little smoke generation; combustion gases are non-toxic and non-corrosive |
max. service temperature approx. 80 °C |
