Model | Capacity (t/h) | Wheel quantity | Water pump & water pipe | Diesel engine / Electric motor | Drum diameter | Drum length | Screen size | Weight (kgs) | |||
GL510 | 5-15 | 4 | include | diesel engine / electric motor | 500 mm | 1300 mm | <3-20 | 1200 | |||
GL615 | 10-20 | 4 | include | diesel engine / electric motor | 600mm | 1500 mm | <3-20 mm | 1500 | |||
GL715 | 20-30 | 4 | include | diesel engine / electric motor | 600mm | 1500 mm | <3-20 mm | 1500 | |||
GL815 | 30-40 | 4 | include | diesel engine / electric motor | 600mm | 1500 mm | <3-20 mm | 1500 | |||
GL1020 | 40-100 | 4 | include | diesel engine / electric motor | 1000 mm | 2000 mm | <3-20 mm | 2300 | |||
GL1225 | 100-160 | 4 | include | diesel engine | 1200 mm | 2500 mm | <3-20mm | 3000 | |||
GL1530 | 150-200 | 4-6 | include | diesel engine / electric motor | 1500 mm | 3000 mm | <3-20 mm | 4000 | |||
GL1545 | 200-300 | 4-6 | include | diesel engine / electric motor | 1500 mm | 4500 mm | <3-20 mm | 4500 | |||
GL1848 | 300-450 | 4-6 | include | diesel engine / electric motor | 1800 mm | 4800 mm | <3-20 mm | 6000 |
Model | Drum Size (mm) | Screen size (mm) | Rotation speed (r/min) | Feeding size (mm) | Water consumption (M3/h) | Angle of inclination (°) | Water pressure (Mpa) | Capacity (T/h) | Power (Kw) | Weight (T) |
G1030 | Φ1000×3000 | 0.5-20 | 25-28 | ≤100 | 1.5-4 | 0.5-10 | 0.4-0.5 | 30-50 | 15 | 4.8 |
G1136 | Φ1100×3600 | 0.5-30 | 25-28 | ≤100 | 1.5-4 | 0.5-10 | 0.4-0.5 | 40-60 | 15 | 5.2 |
G1230 | Φ1200×3000 | 0.5-30 | 23-25 | ≤100 | 1.5-4 | 0.5-10 | 0.4-0.5 | 50-70 | 18.5 | 5.8 |
G1430 | Φ1400×3000 | 0.5-30 | 20-23 | ≤150 | 1.5-4 | 0.5-10 | 0.4-0.5 | 60-80 | 22 | 6.2 |
G1545 | Φ1500×4500 | 0.5-30 | 18-22 | ≤150 | 1.5-4 | 0.5-10 | 0.4-0.5 | 70-120 | 30 | 6.9 |
G1560 | Φ1500×6000 | 0.5-30 | 18-22 | ≤150 | 1.5-4 | 0.5-10 | 0.4-0.5 | 80-130 | 37 | 8.3 |
G1845 | Φ1800×4500 | 0.5-30 | 20-21 | ≤170 | 1.5-4 | 0.5-10 | 0.4-0.5 | 90-130 | 45 | 11.8 |
G1860 | Φ1800×6000 | 0.5-30 | 20-21 | ≤170 | 1.5-4 | 0.5-10 | 0.4-0.5 | 100-140 | 45 | 12.8 |
G2060 | Φ2000×6000 | 0.5-30 | 19-20 | ≤210 | 1.5-4 | 0.5-10 | 0.4-0.5 | 120-160 | 55 | 14.8 |
G2265 | Φ2200×6500 | 0.5-30 | 19-20 | ≤230 | 1.5-4 | 0.5-10 | 0.4-0.5 | 160-180 | 55 | 16.5 |
G3060 | Φ2000×6000 | 0.5-30 | 15-20 | ≤230 | 1.5-4 | 0.5-10 | 0.4-0.5 | 200-350 | 132 | 25 |
Type | Feed Opening (mm) | Max.feeding size(mm) | Adjusting range of discharge opening(mm) | Capacity(t/h) | Rotation speed of eccentric shaft(r/min) | Motor power(kw) | total weight(t) | Dimensions(mm) |
PE-200*300 | 200*300 | 180 | 15-50 | 2-6 | 260 | 7.5 | 1 | 910*750*990 |
PE-200*350 | 200*350 | 180 | 18-70 | 3-10 | 260 | 11 | 1.3 | 1000*870*990 |
PE-250*400 | 250*400 | 210 | 20-60 | 5-20 | 300 | 15 | 2.8 | 1300*1090*1270 |
PE-400*600 | 400*600 | 340 | 40-100 | 16-60 | 275 | 30 | 7 | 1730*1730*1630 |
PE-500*750 | 500*750 | 425 | 50-100 | 40-110 | 275 | 55 | 12 | 1980*2080*1870 |
PE-600*900 | 600*900 | 500 | 75-200 | 60-200 | 250 | 75 | 20 | 2290*2290*2400 |
PE-750*1060 | 750*1060 | 630 | 80-140 | 115-330 | 250 | 110 | 29 | 2660*2430*2800 |
PE-870*1060 | 870*1060 | 660 | 200-260 | 290-336 | 250 | 110 | 31.5 | 2810*2430*2800 |
PE-900*1060 | 900*1060 | 685 | 230-290 | 160-400 | 250 | 110 | 33 | 2870*2420*2940 |
PE-900*1200 | 900*1200 | 750 | 95-165 | 220-450 | 200 | 110 | 52 | 3380*2870*3330 |
PE-1000*1200 | 1000*1200 | 850 | 195-265 | 315-500 | 200 | 110 | 55 | 3480*3876*3330 |
PE-1200*1500 | 1200*1500 | 1020 | 150-300 | 400-800 | 180 | 160 | 100.9 | 4200*3300*3500 |
PEX-150*750 | 150*750 | 120 | 18-48 | 8-25 | 320 | 15 | 3.8 | 1200*1530*1060 |
PEX-250*750 | 250*750 | 210 | 25-60 | 13-35 | 330 | 30 | 5.5 | 1380*1750*1540 |
PEX-250*1000 | 250*1000 | 210 | 25-60 | 16-52 | 330 | 37 | 7 | 1560*1950*1390 |
PEX-250*1200 | 250*1200 | 210 | 25-60 | 20-61 | 330 | 45 | 8.5 | 2140*1660*1500 |
PEX-300*1300 | 300*1300 | 250 | 20-90 | 16-105 | 300 | 75 | 11 | 2720*1950*1600 |
Model | Shell rotation speed (r/min) | Ball load (t) | Feeding size(mm) | Discharging size(mm) | Capacity(t/h) | Motorpower(kw) | Weight |
Ø600*1200 | 20~36 | 0.5 | <=20 | 0.074-0.4 | 0.2~1 | 7.5 | 1.6 |
Ø900*1800 | 36~38 | 1.5 | <=20 | 0.075-0.89 | 0.65~2 | 18.5 | 4.6 |
Ø900*3000 | 36 | 2.7 | <=20 | 0.075-0.89 | 1.1~3.5 | 22 | 5.6 |
Ø1200*2400 | 36 | 3 | <=25 | 0.075-0.6 | 1.5~4.8 | 30 | 12 |
Ø1200*3000 | 36 | 3.5 | <=25 | 0.074-0.4 | 1.6~5 | 37 | 12.8 |
Ø1200*4500 | 32.4 | 5 | <=25 | 0.074-0.4 | 1.6~5.8 | 55 | 13.8 |
Ø1500*3000 | 29.7 | 7.5 | <=25 | 0.074-0.4 | 2~5 | 75 | 15.6 |
Ø1500*4500 | 27 | 11 | <=25 | 0.074-0.4 | 3~6 | 110 | 21 |
Ø1500*5700 | 28 | 12 | <=25 | 0.074-0.4 | 3.5~6 | 130 | 24.7 |
Ø1830*3000 | 25.4 | 11 | <=25 | 0.074-0.4 | 4~10 | 130 | 28 |
Ø1830*4500 | 25.4 | 15 | <=25 | 0.074-0.4 | 4.5~12 | 155 | 32 |
Ø1830*6400 | 24.1 | 21 | <=25 | 0.074-0.4 | 6.5~15 | 210 | 34 |
Ø1830*7000 | 24.1 | 23 | <=25 | 0.074-0.4 | 7.5~17 | 245 | 36 |
Ø2100*3000 | 23.7 | 15 | <=25 | 0.074-0.4 | 6.5~36 | 155 | 34 |
Ø2100*4500 | 23.7 | 24 | <=25 | 0.074-0.4 | 8~43 | 245 | 42 |
Ø2100*7000 | 23.7 | 26 | <=25 | 0.074-0.4 | 8~48 | 280 | 50 |
Ø2200*4500 | 21.5 | 27 | <=25 | 0.074-0.4 | 9~45 | 280 | 48.5 |
Ø2200*6500 | 21.7 | 35 | <=25 | 0.074-0.4 | 14~26 | 380 | 52.8 |
Ø2200*7000 | 21.7 | 35 | <=25 | 0.074-0.4 | 15~28 | 380 | 54 |
Ø2200*7500 | 21.7 | 35 | <=25 | 0.074-0.4 | 15~30 | 380 | 56 |
Ø2400*3000 | 21 | 23 | <=25 | 0.074-0.4 | 7~50 | 245 | 54 |
Ø2400*4500 | 21 | 30 | <=25 | 0.074-0.4 | 8.5~60 | 320 | 65 |
Ø2700*4000 | 20.7 | 40 | <=25 | 0.074-0.4 | 12~80 | 400 | 94 |
Ø2700*4500 | 20.7 | 48 | <=25 | 0.074-0.4 | 12~90 | 430 | 102 |
Ø3200*4500 | 18 | 65 | <=25 | 0.074-0.4 | 800 | 137 |
Model | 6S-7.6 | 6S-4.08 | 6S-1.95 | 6S-0.5 | ||||
Deck type | Coarse ore deck | Fine sand deck | Slime deck | |||||
Benefication Area(m2) | 7.6 | 7.6 | 7.6 | 4.08 | 1.95 | 0.5 | ||
Deck size | Length(mm) | 4450 | 4450 | 4450 | 3000 | 2100 | 1100 | |
Transmission end width (mm) | 1855 | 1855 | 1855 | 1320 | 1050 | 500 | ||
Concentrate end width (mm) | 1546 | 1546 | 1546 | 1100 | 850 | 430 | ||
Maximum feeding size(mm) | 2 | 0.5 | 0.15 | Sand -2 | Sand -2 | Sand -2 | ||
Slime-0.1 | Slime-0.074 | Slime-0.074 | ||||||
Feeding amount | 0.8-1.5ton/h | 0.8-1.5ton/h | 0.8-1.5ton/h | 0.4-1.5t/h | 0.3-0.8t/h | 0.05-0.2t/h | ||
Feeding density(%) | 25-30 | 20-25 | 15-25 | 10-30 | ||||
Stroke(mm) | 16-22 | 11-16 | 8-16 | 6-30 | 12-28 | 9-17 | ||
Frequency(F) | 45-220 | 53-250 | 60-280 | 210-320 | 250-450 | 280-460 | ||
Water added | 1-3t/h | 1-3t/h | 1-3t/h | 0.4-2t/h | 0.2-1t/h | 0.1-0.5t/h | ||
Transverse slope of deck | 2°30-4°30 | 1°30-3°30 | 1°-2° | 0-10° | 0-8° | 0-10° | ||
Longitudinal slope of deck | 1.4 | 0.92 | --- | --- | --- | --- | ||
Cross-section shape of deck | rectangular | saw-tooth | triangle | --- | --- | --- | ||
Motor power(kw) | 1.1 | 0.55 | ||||||
Transmission mechanism | Eccentric linkage |
Model | Shell szie (Shell diameter×Shell length) mm | Magnetic induction on shell surface mT | Capacity | Power Kw | Shell rotation speed r/min | Weight Kg | |||
Magnetic pole geometric centre | Average | Max. magnetic strength | T/h | m 3/h | |||||
CTS(N.B)-46 | 400×600 | 130 | 160 | 1~3 | 5 | 1.1 | 45 | 600 | |
CTS(N.B)-66 | 600×600 | 145 | 170 | 5~10 | 16 | 1.1 | 40 | 705 | |
CTS(N.B)-69 | 600×900 | 145 | 170 | 8~15 | 24 | 1.1 | 40 | 830 | |
CTS(N.B)-612 | 600×1200 | 145 | 170 | 10~20 | 32 | 2.2 | 40 | 990 | |
CTS(N.B)-618 | 600×1800 | 145 | 170 | 15~30 | 48 | 2.2 | 40 | 1330 | |
CTS(N.B)-712 | 750×1200 | 120 | 155 | 180 | 15~30 | 48 | 3 | 35 | 1500 |
CTS(N.B)-718 | 750×1800 | 120 | 155 | 180 | 20~45 | 72 | 3 | 35 | 2100 |
CTS(N.B)-918 | 900×1800 | 148 | 165 | 190 | 25~55 | 90 | 4 | 28 | 2900 |
CTS(N.B)-924 | 900×2400 | 148 | 165 | 190 | 35~70 | 110 | 4 | 28 | 3500 |
CTS(N.B)-1018 | 1050×1800 | 148 | 165 | 190 | 40~75 | 120 | 5.5 | 22 | 4000 |
CTS(N.B)-1021 | 1050×2100 | 160 | 240 | 280 | 45~88 | 140 | 5.5 | 22 | 4500 |
CTS(N.B)-1024 | 1050×2400 | 160 | 240 | 280 | 52~100 | 160 | 5.5 | 22 | 5000 |
CTS(N.B)-1030 | 1050×3000 | 160 | 240 | 280 | 65~125 | 200 | 7.5 | 22 | 6200 |
CTS(N.B)-1218 | 1200×1800 | 160 | 240 | 280 | 47~90 | 140 | 5.5 | 19 | 5800 |
CTS(N.B)-1224 | 1200×2400 | 160 | 240 | 300 | 82~120 | 192 | 7.5 | 19 | 6200 |
CTS(N.B)-1230 | 1200×3000 | 160 | 240 | 280 | 80~150 | 240 | 7.5 | 19 | 7200 |
CTS(N.B)-1530 | 1500×3000 | 180 | 240 | 300 | 90~170 | 270 | 11 | 14 | 8100 |
CTS(N.B)-1540 | 1500×4000 | 180 | 240 | 300 | 115~220 | 350 | 11 | 14 | 9300 |
***18000GS-20000GS Three discs electromagnetic separator( 3 PC disc magnetic separator)
Three-disc electromagnetic separator is sorting mineral size less than 2-3mm of weakly magnetic minerals and rare metal ore selection, it is a very important mineral processing equipment. Three-disc electrmagnetic separator have 3 models.
Three-disc electromagnetic separator is for a variety of strong magnetic minerals mixed ore separation, according to the difference of magnetic minerals, can achieving efficient separation of minerals can form different intensity magnetic disk by adjusting the excitation current levels, can also be adjusted each level disk and sensing distance between dressing grain is to get different magnetic induction intensity, reaching a one-time separation of various minerals. This device is widely used in ilmenite, monazite, tungsten, tin, tantalum, iron ore and other minerals with magnetic and non-magnetic dry sorting.
Features:
The equipment have reasonable structure, small footprint, simple operation and maintenance, its one-time separate variety of ferromagnetic minerals, weakly magnetic, non-magnetic and so on. Operations can be adapted to water-lack mines.
Product Structure:
The following major structural for diagram 600mm Double-disc Dry strong magnetic separator to do next explain. Main part of the separator by the "mountain" shaped magnetic system, magnetic system suspended above the rotating disk and vibration slots (or belt) components.
Model | Unite | 3PC-500 | 3PC-600 | 3PCX600 |
Magnetic intensity | Hauteur | Distance to beltsurface 2mm Disk teeth 1700 | Distance to beltSurface 2mm Disk teeth 1800 | Distance to belt 2mm Disk teeth 2000 |
Number of magnetic disk | Piece | 3 | 3 | 3 |
Diameter of magnetic disk | mm | 500 | 600 | 600 |
Revolution of magnetic disk | r/min | 25-40 | 22-38 | 22-32 |
Power supply | V | 380 | 380 | 380 |
Exciting coil | Unit | 4 | 4 | 4 |
Matching motor | kw | 0.75 | 1.5 | 1.5 |
Exciting power | kw | 1.5 | 1.6 | 1.6 |
Coil temperature rise | °C | 65 | 65 | 65 |
Rated currentof coil | A | 1.1-1.8 | 1.2-1.9 | 1.2-2.2 |
Duty rating | Continuous | Continuous | Continuous | |
Feed width | mm | 210 | 300 | 300 |
Feed size | mm | ≤2 | ≤2 | ≤2 |
capacity | kg/h | 100-500 | 120-800 | 80-800 |
Overall Size | mm | 2800×800×1220 | 3200×870×1160 | 3150×900×1250 |
Weight | kg | 1900 | 2200 | 2300 |
Our company & Customers Visiting
Ganzhou Gelin Mining Machinery Co., Ltd is an expert manufacturer of mining machines in China. Our company is located in Guzhang Industrial Zone, Shicheng county, Jiangxi province, covering an area of over 30000 square meters, having more than 30 sets of heavy processing equipment and with an annual outpurt of more than 2000 sets of mining machinery.
--- PRE-SALE SERVICE ---
1.Based on clients' request and budget, GELIN experts will strictly make efficient, reliable solutions accordingly;
2.Mine sample testing is available, we welcome the customer send the sample to you for testing by courier, or, the customer take the sample to our factory for testing;
3. Design and provide the complete processing flowchart;
4. Design & manufacturer products according to clients' demands.
--- AFTER-SALE SERVICE ---
1.Pre-check and test the products before delivery;
2.Deliver the whole plant design for our clients which including infrastructure, electrical system and pipeline system design;
3.Trace the status of the shipping until the products received;
4.Prepare required documents to let clients pass custom clearance;
5.Dispatch experts to carry out below service on site:
1) Installation & debug of the machinery
2) Train the first-line operators & technical personnel
3) Carry out any other service clients may need
6. Provide technical exchanging & spare parts for life-long term
--- ONE STOP SOLUTION ---
1.Starting by running the mineral beneficiation experiment. To provide our clients with the best solution accordingly;
2.Besides supply the flowchart design & equipment, we also provide the infrastructure design; Electrical & pipeline system design, etc. To help our clients complete the design of the whole plant;
3.After the installation, debugging of the equipment, the official production will also be guiding by our experienced engineers on site, to guarantee the output minerals perfectly meet your demands.
FAQ
A:1). What type is the mining? Is it rock stone? or it is sand?
2). If rock stone,What is the general particle size(mm) of the raw ore?
3). What is the handling capacity(tons per hour) you plan to work with?
4).What is the elements of the raw ore? How much percent % of each minerals?
A: Yes, we can run the ore-dressing experiments for our customers. After the test, we will based on the results to give you the reasonable flowchart, suitable solution and equipments selection. etc.
A: The warranty period of Gelin equipments is one year. And of course we will supply the spare parts for you for life-long time at lowest cost.
A: Yes, we can help you combine a complete mineral processing line. and give you related professional advices as long as you need.
There is a rich experience engineer team of us. we had already build many mining projects in China & Overseas. You can believe our quality and service.
Welcome to visit our factory in your free time!