Complaint
RTV 2 Silicone Rubber for Tire Mold Making Composite Industry Usage Casting Silicone:
RTV2 silicone rubber for tire mold is mainly used for making molds of tire,concrete stone,GRC,polyurethane products; wax, candle decoration; rapid prototyping and tyre molds; chocolate, candy and similar products. RTV2 silicone rubber for tire mold is a kind of two part silicone rubber in addition cure or platinum cure type with mixing ratio of 1:1 or 10:1. RTV2 silicone rubber can cure at room temperature as well as under heat. It's a kind of food grade silicone and mainly used for mold making.
RTV 2 Silicone Rubber for Tire Mold Making Composite Industry Usage Casting Silicone:
Specification:
| Item | Mixing Ratio | Color | Hardness (Shore A) | Viscosity (mPa·s) | Working Time (25ºC) | Curing Time (25ºC) | Tear-Strength (kN/m) | Tensile-Strength (Mpa) | Elogation (%) | Shrinkage (%) |
| OTT-J810 | 1:1/10:1 | translucent | 10±2 | 5000±2000 | 20-40mins | 3-5h | ≥13 | ≥4.0 | ≥400 | ≤0.1 |
| OTT-J815 | 1:1/10:1 | translucent | 15±2 | 5000±2000 | 20-40mins | 3-5h | ≥15 | ≥5.0 | ≥400 | ≤0.1 |
| OTT-J820 | 1:1/10:1 | translucent | 20±2 | 6000±2000 | 20-40mins | 3-5h | ≥23 | ≥5.0 | ≥450 | ≤0.1 |
| OTT-J825 | 1:1/10:1 | translucent | 25±2 | 7000±2000 | 20-40mins | 3-5h | ≥22 | ≥6.0 | ≥450 | ≤0.1 |
| OTT-J830 | 1:1/10:1 | translucent | 30±2 | 8000±2000 | 20-40mins | 3-5h | ≥20 | ≥6.5 | ≥400 | ≤0.1 |
| OTT-J835 | 1:1/10:1 | translucent | 35±2 | 8000±2000 | 20-40mins | 3-5h | ≥18 | ≥6.5 | ≥400 | ≤0.1 |
| OTT-J840 | 1:1/10:1 | translucent | 40±2 | 9000±3000 | 20-40mins | 3-5h | ≥15 | ≥6.5 | ≥350 | ≤0.1 |
| OTT-J850 | 1:1/10:1 | translucent | 50±2 | 13000±3000 | 20-40mins | 3-5h | ≥12 | ≥6.0 | ≥350 | ≤0.1 |
If you cannot find a suitable silicone, pls click here to choose your ideal product~
RTV 2 Silicone Rubber for Tire Mold Making Composite Industry Usage Casting Silicone:
1.Enclose the product (the original model) with four plastic plates or wooden plates
2.Clean your products and brush a layer of release agent (detergent or soap water) on your product.
3.Stir part A 100g and part B 100g with 1:1 mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuum machine, you can just pour the mixture slowly from the corner so that less bubbles caused)
4.Pour the mixture with correct mixing ratio into the model frame. After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold.
RTV 2 Silicone Rubber for Tire Mold Making Composite Industry Usage Casting Silicone:
Packing : 20KG, 25KG, 200 KG per drum
Shipping : by air & by sea
Delivery time: within 4-6 days after your payment confirmed in our bank
Storage: Storage in cool, dry places.
Shelf life: 18 months with the original unopened package
RTV 2 Silicone Rubber for Tire Mold Making Composite Industry Usage Casting Silicone:
1.high quality similar to global big brand
2.18 months shelf life
3.50-1000 duplication time decided by product sizes
4.silicone non toxic, environment friendly
5.fast delivery within 4-6 days
6.shipment by air or by sea is available
7.24h after sales service
8.professional R&D team
RTV 2 Silicone Rubber for Tire Mold Making Composite Industry Usage Casting Silicone:
1. Do you offer free sample to client?
--Yes, we can provide the sample for test.
2. How to remove the bubbles during my mould making?
--After mixing liquid silicone with curing agent, please put the material into vacuum machine to take off the bubbles.
3. How to get good silicone mould to use longer time?
--The best way is:
#a, Please choose the right liquid silicone according to your products.
#b, Don't use any silicone oil in mold making, because it can make the silicone mould become too soft to use.
#c, Silicone mould can be used longer after the whole silicone mould fully cured, so it's better to wait 2 hours after mould finished.
4. Why silicone rubber add curing agent after mixing a lot of bubbles?
--This is normal physical phenomena. The liquid will produce a large number of bubbles in the mixing time, so, it must pass through the vacuum exhaust bubble treatment.
