Description
We are FACTORY , We do Retail with better price , We do Wholesale with Best Price .
Product Advantages:
Product Description
CARBON GOUGING ROD COPPERCLAD ELECTRODE / CARBON ARC GOUGING ROD - Applications - Fabrication / Maintenance / Farms / Repair Shops
- Current Type - D.C. (Direct Current)
- Operating Polarity - DCEP (Direct Current Electrode Positive) - Reverse Polarity
- Electrode Size -4mm-20mm * 305mm/355mm/400mm/455mm
- Amperage Capacity - 300 - 400 amps
- Pieces per Carton - 50 pieces/ Customized/ OEM LABELLING
I, OverviewThe carbon arc air gouging is to take the carbon rod as the electrode, use the high temperature generated by the carbon arc to melt the metal to be planed, and then blow off the molten liquid metal through the movement of the carbon arc gun, the short arc operation of the carbon rod, and the compressed air effect of the carbon arc gun nozzle to plane out a groove to achieve the purpose of gouging. Carbon arc gas cutting is to cut metal materials with carbon arc air gouging, that is, thin materials can be cut with one air gouging, and thick materials can be cut with multiple air gouging.2} Characteristics of carbon arc air gouging1. The carbon arc air gouging is much more efficient than the air shovel. It is suitable for working in all positions, especially in the elevation and vertical positions!2. It is easy to observe and find all kinds of defects in time in the process of cleaning welding root and reverse repair welding seam planing.3. The carbon arc air gouging can be used in narrow positions and in places where it is difficult to use other planing tools. It is flexible and convenient, and the quality is guaranteed.4. Carbon arc air gouging can be used to plane and cut some metals that cannot be cut by oxygen acetylene, such as cast iron, stainless steel and non-ferrous metals.5. The diameter of carbon rod is generally 6-30mm, and the cutting seam is wide, which is a bit wasteful; And narrow slots and slots cannot be realized.6. When cutting some metal materials, it will cause carburization in the heat affected zone and increase the quenching and hardening sound at the cutting groove.7. The cost of DC power supply is high.8. A large amount of smoke and dust will be produced in the process of planing and cutting, especially when working in a place with poor ventilation, which will cause certain damage to the operator. D. C. Copper Coated Air Arc Gouging Carbon Electrodes
Air Carbon Arc Gouging Electrodes removes metal by utilizing the intense heat of the arc between the carbon-graphite electrode and the substrate to melt material that is subsequently removed from the work area by a jet of air. By controlling the angle of the electrode, the depth of the gouged area can also be controlled.
Caution:
• Electrodes must be kept dry. Wet electrodes can flake, or splinter and are dangerous. If electrodes become wet, bake at 300°F for 10 hours before using.
Product Parameters
DC Pointed Gouging Rod| Diameter * Length ( mm ) | Diameter * Length ( inches ) | Current Range ( A ) |
| 3.2*305 | 1/8*12' | 130-180 |
| 4*305(355) | 5/32*12'(14') | 150-200 |
| 5*305(355) | 3/16*12'(14') | 200-250 |
| 6*305(355)(400)(455)(510) | 15/64*12'(14')(16')(18')(20') | 15/64*12'(14')(16')(18')(20') |
| 6.5*305(355) | 1/4*12'(14') | 320-370 |
| 7*355 | 9/32*14' | 350-400 |
| 8*305(355)(400)(455)(510) | 5/16*12'(14')(16')(18')(20') | 400-450 |
| 9*305(355) | 23/64*12'(14') | 450-500 |
| 9.5*305(355) | 3/8*12'(14') | 500-550 |
| 10*305(355)(400)(455)(510) | 3/8*12'(14')(16')(18')(20') | 550-600 |
| 11*305(355) | 7/16*12'(14') | 600-650 |
| 12*305(355) | 15/32*12'(14') | 750-850 |
| 12.7*305(355) | 1/2*12'(14') | 800-1000 |
| 13*305(355) | 1/2*12'(14') | 800-1000 |
| 16*305(355) | 5/8*12'(14') | 1000-1200 |
| 19*305(355) | 3/4*12'(14') | 1200-1400 |
DC Jointed Gouging Rod| Diameter * Length ( mm ) | Diameter * Length ( Inches ) | Current Range ( A ) |
| 8*355(430)(455) | 5/16*14'(17')(18') | 500-550 |
| 10*355(430)(455) | 3/8*14'(17')(18') | 600-650 |
| 11*355(430) | 7/16*14'(17') | 650-700 |
| 12*355(430) | 15/32*14'(17') | 700-800 |
| 13*355(430)(455)(510) | 1/2*14'(17')(18')(20') | 800-1000 |
| 16*355(430)(455)(510) | 5/8*14'(17')(18')(20') | 1000-1200 |
| 19*355(430)(455)(510) | 3/4*14'(17')(18')(20') | 1200-1400 |
| 25*430 | 1*17 | 1400-1600 |
DC Flat Gouging Rods| Diameter * Length ( mm ) | Diameter * Length ( Inches ) | Current Range ( A ) |
| 3X25X355 | 1/8X1X14 | 300-350 |
| 4X12X355/305 | 5/32X15/32X14/12 | 200-250 |
| 5X10X355/305 | 3/16X25/64X14/12 | 300-350 |
| 5X12X355/305 | 3/16X15/32X14/12 | 350-450 |
| 5X15X355/305 | 3/16X19/32X14 | 450-550 |
| 5X18X355/305/430 | 3/16X45/64X14/12 | 600-700 |
| 5X20X355/305/400 | 3/16X25/32X14/12 | 700-800 |
| 5X25X355/400/455 | 3/16X63/64X14/16 | 800-900 |
| 6X20X355/305 | 15/64X25/32X14/12 | 750-850 |
Various Type , Accept Sample order or Retails in Cartons !!!! Our Advantages
- Excellent Arc Stability
- Superior Metal Removal
- Clean and Uniform Cut
- Flexible Process
- Most Economical
- Good Quality and Price
- Fast delivery
- Easy to operate,Widely application scales
- Good effects and economical
- Strong anti-oxidizes, Low electric resistance race
Application
- Machining U-Grooves for weld joint preparation
- Removing defective welds
- Cleaning and repairing metal castings
- Removing hard surface metal to facilitate repair
- Cutting non ferrous and other "hard to cut" metal
- Carbon Steel
- Stainless Steel
- Ferrous Alloys
- Gray, Malleable and Ductile Iron
- Aluminium
- Nickel
- Copper Alloys
- Other Non-Ferrous
- Rough machining
Process Requirement
- D.C Power Source
- Gouging Carbon Rod
- Gouging Torch
- Compressed Air, 8-10Kg/cm2
Composition of carbon arc air gouging (cutting) equipment1. DC power supply: any type of manual arc welding machine can be used as the power supply for carbon arc gouging and cutting; Usually, large capacity DC welding machine (>400A) can be used, or two welding machines can be used in parallel.2. Air pump: It is required that the air pressure shall not be less than five atmospheres, and the pressure shall be stable, with a large air output (> 0.36L/min)3. Carbon rod: generally, copper plated solid carbon rod is used, and its section shape can be round or flat. The flat carbon rod groove is wider than the plot groove and is suitable for large plane planning. It is required to have high temperature resistance, good conductivity, not easy to break, fine section structure, less ash, low cost, etc. Common round specifications: φ three × 355~ φ sixteen × 355; Flat size: 3 × eight × 355~6 × twenty × three hundred and fifty-five4. Carbon arc air gouging Torch: it has two types of carbon arc air gouging guns: circumferential air supply and side air supply. At present, the side air supply air gouging gun is widely used, which is characterized by high production efficiency, good quality, less electrode burning loss and convenient operation. The requirements for carbon arc air gouging gun are: good conductivity, powerful and accurate air supply; The carbon rod can be clamped firmly, adjusted and replaced flexibly and conveniently; Simple structure, light weight and convenient operation. The shell insulation is good. Detailed Photos
DC POINTED GOUGING ROD , DC JOINTED GOUGING ROD , DC FLAT GOUGING ROD
Complaint
