Qualcomm 2.4G High Power Ceiling Wireless Access Point Openwrt Support

Min.Order: 100

Product origin: Shenzhen, Guangdong, China

Infringement complaint:

Complaint

US$ 1 ~ 22

Description

Qualcomm 2.4G High Power Ceiling Wireless Access Point OpenWRT Support

Description:
A930H-P48 is a 300Mbps high power Ceiling Wireless Access Point with Qualcomm QCA9531 Chipset. Comply with IEEE 802.11b/g/n standard, 300Mbps data rate, with MIMO omni antenna inside, 500mW high RF power together with IEEE 802.3af PoE, easy to set up in different environment.

Ceiling Mount case, Hardware with Qualcomm chipset, 16M Flash, 64M DDR2, firmware work with AC controller for central management and captive portal authentication function, it designed specifically for business-class environments such as hotels, airports, coffee shops, shopping centers, sporting venues, and university campus.

Stylish Ceiling Mount Design
Housed in a stylish ceiling mountable case, the A930 can be installed on a wall or ceiling to blends in nicely with most interior decorations in a modern hotel. With big space and Installed highly on ceiling, it extends optimum wireless signal to multiple neighboring rooms and better heat radiation.

High Power and Whole Coverage
With 500mW high power, Internally equipped with 2X2 multiple-input, multiple-output (MIMO) 5dBi omni antennas improve range and maximize data rates. Field tested to wirelessly cover 6~8 hotel rooms at an indoor operating distance of 50 meters and allow simultaneous accesses by up to 50 users. Up to 300Mbps wireless rate ensures multiple users an adequate level of service.

Power over Ethernet
The device has integrated Power over Ethernet (PoE) for easy installation and lower cost, with IEEE 802.3af PoE, it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.

WLAN Controller & Cloud Server support
This A930 work with Access Control System, easily access advanced network settings through PC, like AP status monitor, change IP address, ESSID, Channel, Password, upgrade firmware, backup and restore...

What's more, this wireless access point work with Cloud Server, easy to do remote management, Advertisement, captive portal authentication, even Billing and Radius supported in the near future, which make this AP more professional in WiFi Projects.

Hardware Specs:

Chipset	QCA9531
Standard	802.11b/g/n, MIMO technology
Flash	16MB
DDR3L	128MB
2.4G Frequency	2.4GHz - 2.484GHz
2.4G Wi-Fi standard	802.11b/g/n
Interface	1 * 10/100 RJ45 WAN Port
	1 * 10/100 RJ45 LAN Port
	1 * Reset button, press 10 seconds to revert to default setting
Antenna	Build in 2*4dBi 2.4G MIMO Antenna
Data Rate	300Mbps
End Users	50+
2.4G RF Power	≤ 27dBm
PPM	±20ppm
DC	12V----1A
PoE	48V (IEEE 802.3af)
LED light	Sys, WAN, LAN
Power Consumption	≤ 10W
Size	18818850mm

Firmware Specs:

Working Mode	Gateway, AP, Repeater, WISP
Wireless Functions	Multiple SSID functions: 2.4GHz: 4
	Support SSID hidden
	Support seamless roaming, 802.11kvr standard.
	Wireless Security: Open, WPA, WPA2PSK_TKIPAES, WAP2_EAP, 802.1x
	Support MAC filter
	Support Wi-Fi time on/off to save energy
	Support client isolation to improve the wireless stability
	Support RF power adjustable, adjust the RF power based on environment.
	Support user quantity limited, Max 50 users to access each band.
Networking Function	VLAN settings
Networking Function	Cloud access support in gateway mode
Device Management	Back-up the configuration
	Restore the configuration
	Reset to factory default
	Reboot the device: including time reboot or reboot immediately
	Admin management password modify
	Firmware upgrade
	System log
	Support firmware GUI web management, AC controller management, remote management and cloud management
Protocols	IPv4