Eaton 6K-985 6K-800 6K-310 Cycloid Hydraulic Motor For Rigs
The 6K series hydraulic motor is an end-flow type cycloidal hydraulic motor. It adopts advanced column-type stator and rotor parameter design, which has high working efficiency, high working pressure, low starting pressure, stable operation and the same output torque in both directions. Mainly used in hydraulic drilling machine hydraulic motor 6K-310, non-excavation hydraulic motor 6K-245, hydraulic traveling motor, down-the-hole drilling machine hydraulic motor, water well drilling machine hydraulic motor, mountain drilling rig hydraulic motor, Jinke drilling machine hydraulic motor, Xugong non-excavation Drill motor, slag machine motor, horizontal drill motor, winch, truck crane, etc.
Features:
1. Adopt advanced stator and rotor parameter design, low starting pressure, high efficiency, stable operation at low speed
2, able to withstand high working pressure, high output torque
3, advanced shaft seal design, high back pressure bearing capacity, advanced and reliable linkage shaft design, so that the motor has a long life
4. Advanced flow distribution mechanism design, featuring high flow matching precision and automatic wear compensation
5, the structure is compact, easy to install
6, the motor can be used in series and parallel, when connected in series should be connected to the drain pipe
7, using tapered roller bearing support design, with a large radial load capacity, so that the motor can directly drive the working mechanism, no need to add external bearings
8. Intermittent working pressure refers to the maximum allowable pressure at the inlet. Continuous working pressure means that the working pressure difference should not use the motor at the maximum speed and maximum pressure at the same time.
The advantages are as follows: 1. Small in size and light in weight, its outer dimensions are much smaller than other types of hydraulic motors of the same torque. 2, wide range of speed, stepless speed regulation, the lowest stable speed up to 15 rev / min, easy installation and installation, low investment costs. 3. It can be used in series in the hydraulic system, or it can be used in parallel. 4, the rotation inertia is small, easy to start under load, both forward and reverse can be used, and there is no need to stop when commuting. Main features: 1. The end face distribution is adopted, the structure is simple and compact, and the flow matching precision is high; 2, using the insert stator and rotor pair, high mechanical efficiency, long life with high pressure operation; 3, the use of double-corner ball bearings, can withstand large radial and axial loads, low friction, high mechanical efficiency.
1.Fixed plug-in motor with axial tapered piston rotary group of bent-axis design, for hydrostatic drives in open and closed circuits 2.Far-reaching integration in mechanical gearbox due to recessed mounting flange located in the center of the case (extremely space-saving construction) The output speed is dependent on the flow of the pump and the displacement of the motor 3.The output torque increases with the pressure differential between the high-pressure and the low-pressure side. 4.Small dimensions 5.High total efficiency 6.Complete unit, ready-assembled and tested 7.Easy to install, simply plug into the mechanical gearbox 8.No configuration specifications to be observed when installing We could supply the rexroth hydraulic pump and motor, also the inner spare parts as below model: 1 A8VO: A8VO55,A8VO80,A8VO107,A8VO160 2,A2FO: A2FO5 A2FO10 A2F12 A2FO16 A2FO23,A2FO28,A2FO32,A2FO45,A2FO56,A2FO63 A2FO80 3,A4VSO: A4VSO40,A4VSO45,A4VSO56,A4VSO71,A4VSO125,A4VSO180,A4VSO250,A4VSO500, 4,A4VG: A4VG28,A4VG45,A4VG50,A4VG56,A4VG71,A4VG125,A4VG180,A4VG250 5,A6V: A6V55,A6V80,A6V107,A6V160,A6V225,A6V250 6,A7V: A7V16,A7V28,A7V55,A7V80,A7V107,A7V160,A7V200,A7V250 7,A8V: A8V55,A8V80,A8V107,A8V115,A8V172 8,A10VSO: A10VSO10,A10VSO18 A10VSO28,A10VSO43,A10VSO45,A10VSO71,A10VSO100,A10VSO140 9,A10VD: A10VD17,A10VD21,A10VD28,A10VD43,A10VD71 10,A11V: A11V50 A11V90 A11V130,A11V145 A11V160,A11V190,A11V250 11,PVV,PV7: PV2.PVV4.PVV5.PVV21.PVV41.PVV42.PVV51.PVV52.PVV54,PV7-1X,PV7-2X 12,PGF,PGH,PGP: GF1-2X,PGF2-2X,PGF3-3X,PGH2-2X,PGH3-2X,PGH4-2X,PGH5-2X,PGP2-2X,PGP3-3X 13 Others: AP2D21,AP2D25,AP2D36,AP2D38