Abbott Connector Compatible Disposable Invasive Pressure Transducer

Min.Order: 2

Product origin: Shenzhen, Guangdong, China

Infringement complaint:

Complaint

US$ 4.2 ~ 6

Description

Disposable IBP Transducer
Disposable Pressure Transducer are used in ICU Anesthesiology and enable to consist and accurate reading of arterial and venous blood pressure measurement.

Available with flushing of 3cc/hr, 30cc/hr or without flush valves.

Properties	Medical Materials & Accessories
Product Name	Abbott disposable IBP transducer
Brand Name	JCR
Model Number	JIBPT-01-YP

Main technical para meters and working environment requirements:
Disposable Pressure Transducer
Barometric pressure	70~106Kpa
Relative humidity	10~90% (non-condensing)
Operating pressure range	-50 ~ + 300 mmHg
Sensitivity	5.0μV/V/mmHg ±3%
Nonlinearity and hysteresis	full-scale reading±1.5%
Input impedance	1200Ω ~3200Ω
Zero pressure offset	-20mmHg~+20mmHg
Thermal offset shift	≤±0.3mmHg/°C
Offset drift	After warm-up for 20 seconds, drift within 2 mmHg within 8 hours
Thermal span shift	≤±0.1%/°C
Frequency response	Standard pressure set (48 "/ 12") is 40 Hz; Separate sensor > 200 Hz
Defibrillator withstand	Defibrillation depends on the final connection of the equipment.
Leakage current	Leakage current is dependent on the final connection of the equipment
Overpressure load	-400~+4000mmHg
Shock resistance	Withstand falling from one meter for three times
Light sensitivity	When exposed to a 3400°K tungsten light, candle light at 3000 feet, it's less than 1 mmHg under rated voltage.
Storage and transport environment requirements	- 20 ° C~ + 60 ° C, < 90%(non-condensing), no corrosive gas and indoor ventilation, and to avoid high temperature and cold.
Contact with the human body	≤168h
Intra-system velocity
Flow	2-5mL/h
Intra-system velocity refers to the velocity under 6.00 VDC and 25°C, unless there are additional instructions.
Product shelf-life	3 years