Customized Hot Galvanized Steel Frame Tomato Agricultural Agriculture Greenhouse with Cheap Price

Min.Order: 100
Product origin: Weifang, Shandong, China
Infringement complaint: complaintComplaint
US$ 1 ~ 11

Description

Product Description

Product Name
 Plastic Film Greenhouse
Span
6m/8m/10m Customized
Length
30m/50m/60m or Customized
Shoulder Height
1.5m-1.8m or Customized
Roof Height
3.5m or Customized
Wind Load
0.6KN/M2
Snow Load
0.5KN/M2
Max Rain Quantity
140mm/h


 Film greenhouse greenhouse is one of the most economical and practical greenhouse, it has the lowest cost, and has a variety of specifications, such as simple film greenhouse, single film greenhouse, and enhanced film greenhouse, intelligent film greenhouse, used in most areas of our country. Film greenhouse cost low, high income, economic and practical, is the first choice of farmers to get rich

Skeleton and cover material


The advantages of the film
1.The film greenhouse is most economical and practical greenhouse type. Ti has the characteristics of lowest cost and complete specifications.
2.Durable: scientific process, simple processing technology, easy to understand operation, no need for equipment, handmade, raw materials from a wide range of origin.
 
3.With good drip-resistance, weather resistance, light transmittance and heat preservation, anti-fog effect can be maintained for 2-4 months, aging resistance life can be up to 12-18 months,

The skeleton materials of the greenhouse is made by galvanized steel materials, connected by galvanized and anti-rot bolts and screws, no welded point. And the Greenhouse can be used for exhibition, seed-breeding, flower or vegetable market or mall, ecological restaurant, teaching or scientific research, etc.

Advantages of hot-dip galvanized steel frame
The skeleton surface using plastic spraying and hot dip galvanized anticorrosion process, the arch has good anticorrosion, but also has beautiful, because the appearance of the arch is very beautiful and clean. In addition, the use of high reflective spray coating, together with the rectangular side of the reflective surface is larger, so that the illuminance in the greenhouse engineering than the ordinary greenhouse is about 10-15% high.
 

Building process

1. Survey the site and do civil engineering work

2. Set up columns, install gutter gutters, and reserve U-bolts for later installation of arch rods. In particular, the thickness of the gutters must reach the standard, so as not to affect the compressive capacity of the whole greenhouse.

3. Build the skeleton of the internal greenhouse.

4. Install the shading column outside the shed, the shading arch beam and the beam. Pay attention to the arch beam here, and keep a certain slope, so that the snow on the top is small and the structure is firm.

5. After the skeleton is installed, install the external shading diagonal support and external shading transmission system of the greenhouse.

6. Install fan water curtains and temperature control equipment.

7. Greenhouse film, film must be selected high quality Po film, long service life, greatly saving manpower and financial resources.

8. Install the greenhouse control system.




 

Greenhouse Systems

 

Ventilation System

Top ventilation: All the middle spans have two electric roll up motors and both of side spans have one electric roll up motor.
Side ventilation: Both side have two electric roll up motors
 
Internal shading

•Effectively reduce the greenhouse light, while reducing the temperature of crops and air. •Unique thermal radiation barrier
materials outside greenhouse emission, can keep the curtain under the heat is not lost. •Close the sunshade curtain will increase
the humidity indoor temperature rapidly.




Outside shading

•In summer, the solar radiation heat load is too high,when the external shading system is used, the indoor temperature can be controlled to be only 1º Chigher than that of the outdoor room in a well ventilated greenhouse due to the blocking of most of the solar radiation into the greenhouse.

 
 
Cooling system

•The pads and fans are used together to realize the functions of cooling and ventilation. •In hot weather, using cool water circulation could reduce temperature and increase humidity inside the greenhouse at same time.
Water treatment

•For special irrigation water requirements for rare flowers and plants, which can fully meet the requirements of irrigation water quality meeting to the standards of drinking water. •We also can tailor the most appropriate water treatment system according to the customer's requirements.






Spray Irrigation System


It can improve water utilization efficiency and save irrigation water.
To create a good living environment for crops, promote crop growth and development, to achieve the purpose of increasing production.
Sprinkler irrigation can be combined with fertilizer and pesticide application, but also can save a lot of labor.
Sprinkler irrigation pipeline to transport water, without irrigation ditches and ridges in the field,

project case

 

Our Factory

Production workshop
Modern equipment
Each process is strictly controlled to prevent unqualified products from flowing into the next process, so that the entire production process is a virtuous circle

 Factory Visit
We warlmy welcome customers to visit our company to see our production and quality.
 

Company Profile

 Qingzhou Xinhe Greenhouse Horticulture Co.,Ltd located in Shandong Province,has focused on greenhouse designing, manufacturing and construction for over 16 years.

In the passing years, Xinhe Grennhouse helps our customers from China and overseas markets build hundreds of different types of greenhouses for vegetable planting, flower planting and many other uses.

Besides the mainland market, Xinhe Greenhouse is aggressive enough to extend our overseas markets.

1Project Design
We will make design proposals of greenhouse solution as customers requirement.
 
2Competitive Price
With rich manufacturing and sales experience, we can quote quickly and competitively.
 
3Samples Supply
We can send samples to customers as required.
 
4Quality Control
We'll guarantee to supply products strictly as customer's quality requirements. 
 
5After-sales service
We'll supply installation instruction with the goods, on-line service. We also can dispatch technicians overseas for installation and usage guidance. 
 

We offer competitive price with ensured quality,fast reply, 24 hours on line !!!
Win Hearts, Not Just Orders .

 

Packaging & Shipping

Now we have projects in many foreign countries such as Thailand, Qatar, UAE, Uzbekistan, Japan, North Korea, Turkmenistan, India, Malasyia, Brazil, Saudi Arabia, Russia, Ukraine, Egypt, Australia, Kuwait,etc. And we also attend many exhibitions in Australia, USA, UAE, Uzbeksitan, Russia, Thailand, Saudi Arabia, Turkey, etc.

Check each part and check material list before shipment. Eliminate missing pieces

FAQ

Wecome to our factory to have a visit and any inquiry.
Q1:Are you a trading company or a manufacturer?
A: We are a factory. Our factory produces all items related to the greenhouse, so we provide the best price,
Q2: Do you provide samples? Is it free or extra?
A: Yes, we can provide samples free of charge, but we don't bear the freight.
Q3: How to get a quotation for the greenhouse?
A: Please let us know how many greenhouses are needed? What will be grown in the greenhouse? So that we can suggest related systems
Q4: How should I choose a greenhouse system?
A: Please let us know where the greenhouse is (temperature, wind speed)
Q5: How to assemble the greenhouse when purchasing?
A:We have professional after-sales service engineers who will provide planning drawings and installation manuals. Please send a message for specific details.

Product Tag:
Related categories:
Scroll to Top